请问：

本机进入安全模式，提示"press ESC to cancel loading SPTD.sys",如何解决。（重新安装系统，不作为解决方法之例）

有说\WINDOWS\SYSTEM32\DRIVERS\SPTD.SYS是病毒，有说是虚拟光驱导致，不知何种说法正确。用瑞星2007杀毒软件版本为19.30.43查杀本机无病毒。

烦请告解。
多谢

英语好的话就自己翻译一下吧：
If your system has some problems with SPTD installation you can do as followsI0
If your OS is already running then go to step 2 directly.xp
If you cannot boot your PC at all then start from step 1.E!@n
1. Boot in safe mode and press ESC key when you see on bottom line of display:~+}
"Press ESC to cancel loading SPTD.sys". This will abort loading of SPTD layer.?
2. Remove or temporarily rename WINDOWS\System32\Drivers\sptd.sys.Fe
3. Reboot again in normal mode and check if your issue is solved.1s
In case you had BSOD/crash you can check for minidump (in Windows\Minidump folder) related to that crash, send newest file to support@daemon-tools.cc with exact problem description.6pDZoO
Do NOT send minidump, if your problem is solved after removal of Starforce drivers! (Check this thread.)
Note that you have to rename sptd.sys back after the problem causing the crash is solved in order to get Daemon Tools working.w\)C
You can also download sptdinst.exe (in our download section) for your Windows version (i.e. sptdinst_x86 for 32bit Windows, spdtinst_x64 for 64bit Windows) and execute "sptdinst remove", reboot to complete de-installation.i\XB
If you are unable to boot into safe mode even if you pressed ESC when prompted, boot with your Windows cd into recovery console, log on to your Windows installation (requires Administrator password), change dir (cd) to Windows\System32\Drivers directory, and rename sptd.sys and dtscsi.sys. Reboot to check if your issue is solved.

英语好的话就自己翻译一下吧：
If your system has some problems with SPTD installation you can do as followsI0
If your OS is already running then go to step 2 directly.xp
If you cannot boot your PC at all then start from step 1.
1. Boot in safe mode and press ESC key when you see on bottom line of display:~+}
"Press ESC to cancel loading SPTD.sys". This will abort loading of SPTD layer.?
2. Remove or temporarily rename WINDOWS\System32\Drivers\sptd.sys
3. Reboot again in normal mode and check if your issue is solved.
In case you had BSOD/crash you can check for minidump (in Windows\Minidump folder) related to that crash, send newest file to support@daemon-tools.cc with exact problem description.
Do NOT send minidump, if your problem is solved after removal of Starforce drivers! (Check this thread.)
Note that you have to rename sptd.sys back after the problem causing the crash is solved in order to get Daemon Tools working.
You can also download sptdinst.exe (in our download section) for your Windows version (i.e. sptdinst_x86 for 32bit Windows, spdtinst_x64 for 64bit Windows) and execute "sptdinst remove", reboot to complete de-installation.
If you are unable to boot into safe mode even if you pressed ESC when prompted, boot with your Windows cd into recovery console, log on to your Windows installation (requires Administrator password), change dir (cd) to Windows\System32\Drivers directory, and rename sptd.sys and dtscsi.sys. Reboot to check if your issue is solved.

算了，还是我翻译一下吧：
If your system has some problems with SPTD installation you can do as follows：
如果你的系统在SPTD加载方面出了问题，请按照以下步骤操作：

If your OS is already running then go to step 2 directly.
如果你的操作系统已经运行，直接跳到下面的第2步。

If you cannot boot your PC at all then start from step 1.
如果你根本没有启动计算机，那么，请从下面的第1步进行。

1. Boot in safe mode and press ESC key when you see on bottom line of display:
"Press ESC to cancel loading SPTD.sys". This will abort loading of SPTD layer.
1、启动计算机并进入安全模式，当屏幕底端上出现"Press ESC to cancel loading SPTD.sys"的字样时，按“ESC”键跳过。这将忽略以后的加载 SPTD的工作。

2. Remove or temporarily rename WINDOWS\System32\Drivers\sptd.sys
2、进入系统后，将C:\WINDOWS\System32\Drivers\sptd.sys这个文件删除或合适地改名。

3. Reboot again in normal mode and check if your issue is solved.
3、再次重启后以正常模式登陆系统看看你的问题是否解决。

If you are unable to boot into safe mode even if you pressed ESC when prompted, boot with your Windows cd into recovery console, log on to your Windows installation (requires Administrator password), change dir (cd) to Windows\System32\Drivers directory, and rename sptd.sys and dtscsi.sys. Reboot to check if your issue is solved.
如果你的机器在进入安全模式提示"Press ESC to cancel loading SPTD.sys"时按“ESC”键后机器仍然不能正常启动，请设置从操作系统安装光盘启动，进入后选择“故障恢复控制台”，输入你的计算机相关安装信息（可能需要超级管理员帐户密码），然后用dir或cd命令找到并进入C:\Windows\System32\Drivers这个目录, 将其目录下的sptd.sys和dtscsi.sys这两个文件重命名，再重启计算机看你的问题是否解决。

把最关键的翻译了，其他部分自己翻译吧，貌似不太重要了。