瑞星卡卡安全论坛技术交流区系统软件 玩跑跑卡丁车出现蓝屏,我写下我的蓝屏代码,哪位高手解释下,怎么解决~

1   1  /  1  页   跳转

玩跑跑卡丁车出现蓝屏,我写下我的蓝屏代码,哪位高手解释下,怎么解决~

玩跑跑卡丁车出现蓝屏,我写下我的蓝屏代码,哪位高手解释下,怎么解决~

A problem has been detected and windiws has been.
shut down to prevent damage to your computer.
BAD_POOL_HEADER
If this is the first time you've seen this stop error screen reastart your computer.If this screenappears again follow these steps:
check to make sure ang new hardware or software is properly.
If this is a new installation,ask your hardware or software manufacturer.
If problems continue,disable or remove ang newly installed hardware or software.
If you need to use safe mode to remove or disable components,restart your computer press F8 to select Advanced startup options,and then select safe mode.
Technical information:***STOP:OxOOOOOO19(OxOOOOOO20,Ox819EAD90,Ox819EAD90,OxOA190008)
Beginning dump of physical menory.
Physical menory dump computer.
Contact your system administrator or technical.
Support group for further.
每次玩一局跑跑,搬奖的时候就会出现蓝屏.玩其他游戏都没出现过的~~~
最后编辑2007-03-31 19:29:29
分享到:
gototop
 

断网查下毒。然后试下。
gototop
 

这是死机
是内存不足导致的,也可能是病毒
gototop
 

我也有这个问题!!!请问搂主你的问题解决了吗?该怎么办????
gototop
 

遇到过..

刚刚从做的系统
A problem has been detected and windiws has been.
shut down to prevent damage to your computer.
BAD_POOL_HEADER
If this is the first time you've seen this stop error screen reastart your computer.If this screenappears again follow these steps:
check to make sure ang new hardware or software is properly.
If this is a new installation,ask your hardware or software manufacturer.
If problems continue,disable or remove ang newly installed hardware or software.
If you need to use safe mode to remove or disable components,restart your computer press F8 to select Advanced startup options,and then select safe mode.
Technical information:***STOP:OxOOOOOO19(OxOOOOOO20,Ox819EAD90,Ox819EAD90,OxOA190008)
Beginning dump of physical menory.

内存问题.....考虑替换下...嘎嘎
gototop
 

蓝屏代码的含义:
0X00000019 磁盘驱动器在磁盘找不到指定的扇区或磁道。
gototop
 

1.换个内存~~~差杀内存上的病毒~~~杀完后~~~~~~重新启动~~~OK~~
    问题解决~~~
2.代码错误~~~说明硬盘有坏道~~修理~~或者换数据线~~~OK~~
    问题解决~~
gototop
 

建议先把内存换一个试试,再不行就扫描磁盘错误了!
gototop
 
1   1  /  1  页   跳转
页面顶部
Powered by Discuz!NT