瑞星卡卡安全论坛

7751In Design view, you can't retrieve the value of the ObjectPalette property for an OLE object contained in a bound object frame.@|9 doesn't display the OLE object in the object frame in Design view.@Remove the reference to the ObjectPalette property, or switch to Form view before you run the macro or Visual Basic code that references the ObjectPalette property.@1@@1
7752|9 can't apply the filter because all the records are locked.@The RecordLocks property of the form or report or the Default Record Locking option on the Advanced tab of the Options dialog box (Tools menu) is set to All Records.@Reset the value to No Locks or Edited Record as appropriate.@1@600472@1
7753|@@@1@7236@1
7754You can't move columns between two frozen columns in a datasheet.@To unfreeze all columns, click Unfreeze All Columns on the Format menu.@@1@209174@1
7755|9 can't start the Chart Wizard.@The wizard may not be installed, or this wizard has been disabled.@To install the Chart Wizard, rerun the Microsoft Access or Microsoft Office Setup program, click Add/Remove, and then select the Wizards check box. To reenable this wizard, click About Microsoft Access on the Help menu, and then click the Disabled Items button to view a list of addins which you can enable.@1@@3
7756The form can't display the What's This button if the Minimize button or the Maximize button is displayed.@Set the WhatsThisButton property to No, or set the MinMaxButtons property to None.@@1@@1
7757The form can't display the Minimize button or the Maximize button if the What's This button is displayed.@@@1@@1
7758This ActiveX control isn't enabled in Form view.@You can't set the Enabled or TabStop properties to True.@@1@@1
7759This ActiveX control isn't visible in Form view.@You can't set the Visible or TabStop properties to True.@@1@@1
7760This property is locked and can't be changed.@@@1@@1
7761An error occurred when you changed the control.@@@1@@1
7762The pattern string is invalid.@@@2@210109@1
7763This feature isn't installed, or has been disabled.@To install this feature, rerun the Microsoft Access or Microsoft Office Setup program or, if you're using a third-party add-in, reinstall the add-in. To reenable this wizard, click About Microsoft Access on the Help menu, and then click the Disabled Items button to view a list of addins which you can enable.@@1@@3
7764This feature isn't installed, or has been disabled.@To install this feature, rerun the Microsoft Access or Microsoft Office Setup program, click Add/Remove, and then select the Wizards check box. To reenable this wizard, click About Microsoft Access on the Help menu, and then click the Disabled Items button to view a list of addins which you can enable.@@1@@3
7765This feature isn't installed, or has been disabled.@To install this feature, rerun the Microsoft Access or Microsoft Office Setup program, click Add/Remove, and then click the Additional Wizards check box. To reenable this wizard, click About Microsoft Access on the Help menu, and then click the Disabled Items button to view a list of addins which you can enable.@@1@@3
7766This control can't be changed to the type you requested.@@@1@@1
7767An error occurred while |9 was creating a section.@@@1@@1
7768In order to change data through this form, the focus must be in a bound field that can be modified.@@@1@@1
7769The filter operation was canceled. The filter would be too long.@@@1@@1
7770"|9 didn't apply the filter.@|9 may not be able to apply the filter if you entered an invalid data type in one of the fields.
Do you want to close the filter anyway?@If you click Yes, |9 will build the filter, but won't apply it to the recordset. Then it will close the Filter By Form window.@19@@2"
7771You can't set the ColumnOrder property when you are in Form view or Print Preview.@@@1@@1
7773|9 can't set the LimitToList property to No right now.@The first visible column, which is determined by the ColumnWidths property, isn't equal to the bound column.@Adjust the ColumnWidths property first, and then set the LimitToList property.@1@600929@1
7774You can't set the MenuBar property while an OLE object is in-place active.@@@1@@1
7775There are too many controls on the form to allow Filter By Form.@@@1@@1
7777You've used the ListIndex property incorrectly.@@@2@606997@1
7778You can't save an object when you are in the Filter By Form window.@Switch to Form view, and then save the object.@@1@@1
7779You can't set a form's MenuBar property from its menu bar macro.@Right-click the Form selector button (located to the left of the horizontal ruler) on the form in Design view.  Click Properties, click the Other tab, and then set the MenuBar property.@@1@@1
7780You're trying to insert into a section that can't grow enough for the control you're trying to add.@The maximum total height for all sections in a report, including the section headers, is 200 inches (508 cm).@Remove, or reduce the height of, at least one section. Then try to add the control again.@1@@1
7782You can't create a new instance of this form or report while it is in Design view.@@@1@@1
7784This form or report is already being designed as a subform or subreport. To open this form in Design view, select the subform or subreport and click Subform in New Window on the View menu.
7785"|9 didn't build the filter.@There is an error in the current field.
Do you want to close the filter anyway?@If you click Yes, |9 will undo the changes to the filter, and then close the Filter By Form window.@19@@2"
7788Compile error.@@@1@@1
7789Type mismatch.@@@1@@1
7790|9 can't create the |1.@Either there was an error getting information from the table or query you selected, or a new |2 could not be created.@@1@@1
7791There was an error creating your |1.@Some fields may have been skipped because there was an error getting information about them or because they didn't fit on the |2.@@1@@1
7792You can't open a subform when it is also open in Design view.@@@1@@1
7793You must save the form '|' before you can embed it.@@@1@@1
7794|9 couldn't find the toolbar '|'.@@@1@@1
7795The custom toolbar '|' is the wrong type (menu, shortcut menu, or toolbar) for the property it's being used in.@@@1@@1
7796The process failed because there is no printer installed.@Because |9 saves the printer settings with each form or report, a printer is needed to convert, enable, copy and paste, import, or export your forms or reports. To install a printer, point to Settings on the Windows Start menu, click Printers, and then double-click Add Printer. Follow the instructions in the wizard.@@1@@1
7797You must save new objects in the database before you can save them to this external format.@@@1@@1
7798You can only save select, crosstab, and union queries to this format.@@@1@@1
7799This form or report is based on a query that exceeds the limit for data in a single record.@Exclude any unnecessary fields from the query, or change some of the field types to Memo in the original tables.

7800You can't create a |9 MDE database from a database in an old format.@Close the database and convert it to the current version of |9. Then create the MDE database.@@1@@1
7801This database is in an unrecognized format.@The database may have been created with a later version of |9 than the one you are using. Upgrade your version of |9 to the current one, then open this database.@@1@@1
7802That command isn't available in an MDE/ADE database.@@@1@@1
7803|9 can't rename |1 to |2. The convert operation failed.@@@1@@1
7805This is already an MDE database.@@@1@@1
7806This database does not have a Visual Basic project, so it can't be made into an MDE file.@Open the database in Microsoft Access to create the Visual Basic project.@@1@@1
7807You can't make the open database into an MDE file while running a macro or Visual Basic code.@Instead of using a macro or code, on the Tools menu, point to Database Utilities, and then click Make MDE File.@@1@@1
7808|9 can't replace an existing file as a result of converting the |9 database.  You must select a new file name.@@@1@@1
7809You can't rename a | object in the client/server version of |9.@@@1@@1
7810You can't compact the open database while running a macro or Visual Basic code.@Instead of using a macro or code, on the Tools menu, point to Database Utilities, and then click Compact/Repair Database.@@1@@1
7811|9  requires Microsoft SQL Server 6.5 or later for Access projects.  You need to upgrade the selected SQL database to Microsoft SQL Server 6.5 or later.@@@1@@1
7812Microsoft Access projects can only be connected to Microsoft SQL Server
7813Restoring a database requires that no one is currently using the database.@Do you want to close all objects, select a backup file, and restore the database from backup?@@1@@1
7814Dropping a database requires that no one is currently using the database.@Do you want to close all open objects and drop the database?@@1@@1
7815|9 was unable to create an ADE database.@@@1@@1
7816Microsoft Access requires this Microsoft SQL Server 6.5 installation to be upgraded to service pack 5 in order to successfully connect to this server. @@@1@@1
7817The database file '|' is already open.  You cannot encrypt to an open file.@@@1@@1
7818|9 was unable to create the Database window.@Please upgrade to a newer version of Microsoft Internet Explorer.@@1@@1
7819You have chosen a database template file that is not supported in the current version of |9.@To create a database using the Database Wizard, click the Databases tab in the New dialog box and then double-click a database icon.@@1@@1
7820|9 no longer supports Pages as startup documents.
7821The TEMP environment variable isn't defined.  Microsoft Access can't find the temporary file directory.@@@1@@1
7822Microsoft Access can't initialize the transfer object.  Make sure you have Microsoft SQL Server or the Microsoft SQL Server Desktop Engine installed on the local machine.@@@1@@1
7823The source or destination database name is missing.  The transfer operation can't continue.@@@1@@1
7824The source or destination server name is missing.  The transfer operation can't continue.@@@1@@1
7825Microsoft Access can't find the server '|'.@@@1@@1
7826The database object type isn't supported by the Microsoft Access transfer operation.@@@1@@1
7827The current database '|1' has |2 active connections.  Microsoft Access must disconnect all applications before you can copy the database file.  What do you want to do to all the active connections?|7&Disconnect|7Cancel@@@35@@
7828The object '|' is not a valid Microsoft SQL Server database object.  Microsoft Access can't transfer this object.@@@1@@1
7829The SQL script used to create database objects is corrupted. Microsoft Access can't create the new objects.@@@1@@1
7830The SQL script used to create database object '|' is corrupted. Microsoft Access can't create the new object.@@@1@@1
7831Microsoft Access can't create the file '|'.@@@1@@1
7832The current database '|' is replicated and can't be copied until you disable replication. Use Microsoft SQL Server Enterprise Manager to remove publications and subscriptions before copying the database file.@@@1@@1
7833The current database '|' has more than one data file and can't be copied.@@@1@@1
7834The Transfer Database Wizard didn't provide enough information to perform the transfer operation.@@@1@@1
7835Microsoft Access can't copy the database file because one or more objects are open. Do you want to close all the objects?@@@1@@1
7836Microsoft Access can't copy the database file because one or more objects are open. Close all objects and try again.@@@1@@1
7837Invalid argument in script.@@@1@@1
7838There were errors during the database transfer operation.  Open the transfer log file for details.@@@1@@1
7839Errors occurred during the database transfer operation.@@@1@@1
7840The database transfer operation failed. The destination database '|' was created and is in an unknown state.  What would you like to do with the destination database?|7&Keep|7&Delete@@@35@@
7841The destination file '|' already exists. Set the Overwrite flag to TRUE if you want to replace the existing file.@@@1@@1
7842This operation requires Microsoft SQL Server version 7.0 or later on your local computer. You can install Microsoft SQL Server 2000 Desktop Engine from the MSDE2000 folder on the Microsoft Office CD-ROM.@@@1@@1
7843You can only copy the database file when the current database is on your local computer. If you want to make a copy of a database on a remote server point to Database Utilities on the Tools menu, and then click Transfer Database.@@@1@@1
7844Microsoft Access can't copy the database file because there are active connections to the current database.@@@1@@1
7845|@@@1@@1
7846Microsoft Access can't compact and repair the current database.@@@1@@1
7847'|' already exists.  Microsoft Access must create a backup of your file before performing the repair operation. Enter a name for the backup file.@@@1@@1
7848The transfer operation has been cancelled. The destination database '|' was created and is in an unknown state.  What would you like to do with the destination database?|7&Keep|7&Delete@@@35@@
7849The repair operation has been cancelled because Microsoft Access couldn't create a backup of the file.  You might not have adequate permissions or enough disk space to create the backup file. To repair the file manually, point to Database Utilities on the Tools menu, and then click Compact and Repair Database.@@@1@@1
7850"|9 can't find the wizard, or the wizard has not been installed, or there is a syntax error in the Declarations section of a Visual Basic module.@
The wizard you need may be missing from the Libraries key of the |9 section of the Windows Registry, or the wizard has been disabled.@To make sure that the wizard is in the Windows Registry, run Setup to reinstall |9, and then compile all Visual Basic modules in the database. To reenable this wizard, click About |9 on the Help menu, and then click the Disabled Items button to view a list of addins which you can enable. @1@@3"
7851The toolbar name '|' you entered already exists.@Enter a unique name for this toolbar.@@1@@1
7852The toolbar name '|' you entered doesn't follow |9 object-naming rules.@For more information about naming objects, click Help.@@2@611734@1
7853The default column width must be at least 0.1 inch.@@@1@@1
7854You can't export database objects (except tables) from the current version of |9 to earlier versions of |9.@@@1@@1
7855You must have a database open to create custom toolbars, and the database can't be read-only.@@@1@@1
7856'|' cannot be imported, exported, or copied to Access project files.@@@1@@1
7858The Tab Width setting in the Options dialog box (Tools menu) for the Module or Debug window must be from 1 through 32.@@@1@@1
7859|9 can't start because there is no license for it on this machine.
7860The profile '|' that you specified on the command line doesn't exist in the Windows Registry.@@@1@@1
7861'|' cannot be imported, exported, or copied to Access database files.@@@1@@1
7862|9 can't find the wizard.  This wizard has not been installed, or there is an incorrect setting in the Windows Registry, or this wizard has been disabled. @To reenable this wizard, click About Microsoft Access on the Help menu, and then click the Disabled Items button to view a list of addins which you can enable. Rerun Microsoft Access or Microsoft Office Setup to reinstall the wizards. If the missing wizard is not a Microsoft Access wizard, reinstall it using the Add-in Manager.@@1@@3
7863Links can only be created between Microsoft Access database files.
7864|9 doesn't allow empty strings.@@@1@@1
7865There is already an existing database with the name you entered. Give the new database a unique name.
7866|9 can't open the database because it is missing, or opened exclusively by another user.
7867You already have the database open.
7868You can't use a SetMenuItem macro action on a default menu.@SetMenuItem is for custom menus only.@@1@@1
7869The SetMenuItem action does not have enough information to be carried out.@An argument is invalid, or there are not enough arguments.

7870|9 can't find the database '|.'@Check the database name (and path, if specified) to make sure you entered it correctly.@@1@@1
7871The table name you entered doesn't follow |9 object-naming rules.@For more information about naming objects, click Help.@@2@611734@1
7872This recordset is not updatable.
7873'|' cannot be imported, exported, or copied to another database or project file.@@@1@@1
7874"|9 can't find the object '|.'@* You misspelled the object name. Check for missing underscores ( _ ) or other punctuation, and make sure you didn't enter leading spaces.
* You tried to open a linked table, but the file containing the table isn't on the path you specified. Use the Linked Table Manager to update the link and point to the correct path.@@1@@1"
7875The table '|' already exists.@You created or renamed a table, and then tried to save it. Before |9 could save the table, another user created or renamed one using the same name.@@1@@1
7876"There isn't enough temporary disk space to complete the operation.@Free disk space, and then try the operation again.
For more information on freeing temporary disk space, search the Microsoft Windows Help index for 'disk space, freeing'.
For information on compacting a database to free disk space, click Help.@@2@209009@3"
7877|9 can't sort on the Memo, OLE Object, or Hyperlink '|'.@The ORDER BY clause of an SQL statement can't include any Memo, OLE Object, or Hyperlink fields.@@1@@1
7878The data has been changed.@Another user edited this record and saved the changes before you attempted to save your changes.@Re-edit the record.@1@@1
7879An invalid IDA has been passed to |9 error handling.@Please report this error and the steps that caused it.@@1@@1
7880The value you entered is the wrong data type for this field.@Enter an integer.@@1@@1
7881"The Macro Conversion Wizard can't be started.@This wizard may not be installed, or this wizard has been disabled.@To reenable this wizard, click About Microsoft Access on the Help menu, and then click the Disabled Items button to view a list of addins which you can enable. Rerun Microsoft Access or Microsoft Office Setup to reinstall this wizard. If you want to preserve your security or custom settings, back up the |9 workgroup information file.
For more information on backing up files, search the Microsoft Windows Help index for 'backing up files'.@1@@3"
7882You can't convert, enable, or encrypt an Access Project file.@@@1@@1
7883You can't set the MenuBar property unless a database is open.@@@1@@1
7884You can't export an object to itself.@Select a different database to export to, or give the object a new name.@@1@@1
7885The source database has no import/export specifications to copy.@@@1@@1
7886|9 can't find the dynamic-link library (DLL) Mso.@Rerun the |9 or Microsoft Office Setup program.@@1@@3
7887A unique record identifier can't consist of more than 10 fields.@@@1@@1
7888You must set the default font size to a number from |1 through |2.@For more information on the FontSize property, click Help.@@2@612551@1
7889The file '|' does not exist.@@@1@@1
7890The file '|' doesn't contain any data.@You can't import from, or link to, an empty spreadsheet.@@1@@1
7891This database is read-only.@The conditional compilation argument option can't be saved.@@1@@1
7892An error occurred while saving module options.@You may be running Visual Basic in break mode.@Reset the running code before changing the module options.@1@@1
7893You can't import objects into a database created in an earlier version of |9.@Convert the database to the current version of |9 using the Convert Database command (Tools menu, Database Utilities submenu).@@1@209029@1
7895"|9 was unable to create a window.@The system is out of resources or memory.@Close unneeded programs and try again.
For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@3"
7896Error '|' in the validation rule.@@@2@600687@1
7897Error '|' in the default value.@@@2@602264@1
7898Execution of this application has stopped due to a run-time error.@The application can't continue and will be shut down.@@1@@3
7899|9 can't be started.@|9 was unable to initialize the Windows Registry.@Rerun Microsoft Access or Microsoft Office Setup to reinstall |9.@1@@3
7900|9 can't convert the database because it can't create an error table.@@@1@@1
7901|9 can't convert the database because it can't write to the error table.@@@1@@1
7902Errors occurred converting |1 validation rules and default values.@See error table '|2' for a list of errors.@@1@@1
7903|9 can't insert this field.@There are too many fields in the table. The limit is 255.@@1@@1
7904An error occurred in the Field Builder.@You've replaced or modified the default Field Builder, and |9 is unable to run the new version. Reinstall |9 to correct the error.@@1@@1
7905|9 can't change these field data types.@Some data in this table violates the record validation rule.@Before any data types can be changed, remove the record validation rule or correct the data.@1@@1
7906|9 couldn't launch the Lookup Wizard, or this wizard has been disabled.@Rerun the Microsoft Access or Microsoft Office Setup program, click Add/Remove, and select the Wizards check box. To reenable this wizard, click About Microsoft Access on the Help menu, and then click the Disabled Items button to view a list of addins which you can enable.@@1@@1
7907You don't have permission to modify the design of this table.@For more information on permissions and who can set them, click Help.@@2@410222@1
7908You can't modify this table now because someone else is using it.@@@1@@1
7909|9 can't add another column to this table.@You can have up to 255 columns in your table.@@1@@1
7910|9 can't delete this column.@Tables must have at least one column.@@1@@1
7911|9 can't delete this index.@This table participates in one or more relationships.@Delete its relationships in the Relationships window first.@1@@1
7912Once you save the change to the data type of this column, you will not be able to change back to the previous data type.@Are you sure you want change the data type?@@20@@2
7913You can't change a random-valued AutoNumber field to an incremental AutoNumber field.@The values of random-valued AutoNumber fields aren't continuous.@@1@@1
7914You can't convert ReplicationID values to other data types.@@@1@@1
7915You can't delete the field '|'; it is a replication system field.@Use a make-table query to create a new table that contains all the fields in the table except system fields. For information on make-table queries, click Help.@@2@209993@1
7916|9 is unable to start the Lookup Wizard.@The Lookup Wizard doesn't apply to fields of this data type.@@1@@1
7917'|' cannot be created due to the project being disconnected.@Use the Connection... command under the File menu to connect the project to a database.@@1@@1
7918The Object Name argument for the 'Save' macro action is not supported within an Access Project for Table or Query objects.@You cannot save these objects with a new name in an Access Project.@@1@@1
7919The default data type you selected is not supported in all versions of Microsoft SQL Server.@If the server doesn't support the data type you have chosen, the varchar data type will be used in its place.

7950You can't refer to the RecordsetClone property of a form when the form is open in Design view.@@@1@607393@1
7951You entered an expression that has an invalid reference to the RecordsetClone property.@For example, you may have used the RecordsetClone property with a form or report that isn't based on a table or query.@@1@607393@1
7952You made an illegal function call.@Check the syntax of the function you are trying to use.@@1@@1
7953"The value you entered doesn't match the type required.@* The variable, property, or object may not be of the correct type.
* You may have used an If TypeOf construct with something other than a control.@@1@@1"
7954"The expression you entered requires the control to be in the active window.@Try one of the following:
* Open or select a form or report containing the control.
* Create a new control in the active window, and try the operation again.@@1@@1"
7955There is no current code context object.@@@1@@1
7956The syntax of the subquery in this expression is incorrect.@Check the subquery's syntax and enclose the subquery in parentheses.@@2@209989@1
7957You used a Like operator with an incorrect pattern.@Make sure the comparison value is enclosed in quotation marks.@@1@1008961@1
7958The Replication ID you entered is invalid.@Make sure the Replication ID you enter contains only digits or letters for hexadecimal numbers, that the Replication ID is the correct length, and that it is in a canonical SQL form.@@1@@1
7959The expression contains an ambiguous name.@You may have two or more functions with the same name in different modules.@Rename the functions so that each one has a unique name.@1@@1
7960There was an error compiling this function.@The Visual Basic module contains a syntax error.@Check the code, and then recompile it.@1@@1
7961|9 can't find the module '|' referred to in a macro expression or Visual Basic code.@The module you referenced may be closed or may not exist in this database, or the name may be misspelled.@@1@@1
7962The index number you used to refer to the module is invalid.@Use the Count property to count the open modules and make sure that the module number is not greater than the number of open modules minus 1.@@1@@1
7963|9 can't run the macro or callback function '|'.@Make sure the macro or function exists and takes the correct parameters.@@1@@1
7964You entered an expression that has an invalid reference to the Recordset property.@You can only use a dynaset or snapshot recordset to set this property.@@1@607393@1
7965The object you entered is not a valid Recordset property.@For example, you may have used a forward-only recordset, or tried to set it to null.@@1@607393@1
7966The format condition number you specified is greater than the number of format conditions.@Use the Count property to count the format conditions for the control and then check that the format condition number you cite is within the range of existing format conditions.@@1@@1
7967A required minimum or maximum value is missing.@@@1@@1
7968The format condition Type you specified is invalid.@Valid values for the Type property are 0 to 2 for the first condition, and 0 to 1 for all other format conditions.@@1@@1
7969The format condition Operator you specified is invalid.@Valid values for the Operator property are 0 to 7.@@1@@1
7970|9 can't open the file '|.'@It may not be a database, or it may be a database you are unable to open.@@1@@1
7971|9 can't follow the hyperlink to '|'.@Please verify the destination.@@1@@1
7972|9 encountered an error while trying to show the Hyperlink dialog.@@@1@@1
7973The hyperlink address or subaddress text you entered was too long for |9 to store.@The text was truncated to fit in the available space, so the link may not work as expected.@@1@@1
7974|9 failed to insert a hyperlink at the current location.@@@1@@1
7975You chose an invalid control type for use with hyperlinks.@You can only use hyperlinks with labels, images, command buttons, or bound text boxes.@@1@@1
7976There is no stored hyperlink in this control.@@@1@@1
7977|9 is unable to paste the data on the clipboard as a hyperlink.@@@1@@1
7978|9 is unable to add the current hyperlink to the favorites folder.@@@1@@1
7979You can't use the hyperlink property builder with more than one control selected.@@@1@@1
7980The HyperlinkAddress or HyperlinkSubAddress property is read-only for this hyperlink.@@@1@@1
7981The values for 'File or web page name' and/or 'Text to Display' are too long.@The values will be truncated. To keep your original values, click Cancel in the Edit Hyperlink dialog.@@1@@1
7983|9 can't follow the hyperlink because it couldn't create the hyperlink object.@@@1@@1
7990You entered an invalid project name.@You may have deleted the default project name and forgotten to specify a new one.@@1@@3
7991The |9 Source Code Control Add-in is not available; this object will be opened read-only.@@@1@@3
7992The |9 Source Code Control Add-in could not be started.@@@1@@3
7993The object | is currently checked in and is therefore read-only.@To modify the object, close it first, then check it out and reopen it.@@1@@1
7994There was a problem communicating with the Source Code Control Add-in.@@@1@@3
7995The menus on your form or report that are based on |9 macros will not be visible while the Customize dialog box is open.@To have the full power of menu or toolbar customization, convert your macro-based menus to menus or toolbars. With the macro selected in the Database window, point to Macro on the Tools menu, and create a menu, a toolbar, or a shortcut menu from that macro.@@1@@1
7996|9 couldn't create the Data and Misc. Objects because the linked table '|' could not be found.@To create the Data and Misc. Objects, use the Linked Table Manager (Tools menu, Add-ins submenu) to update the link to the source table or file, or delete the link from your current database.@@1@@1
7997You can't save the standard module '|' over a class module with the same name.@Save the standard module to a different name, or delete the class module first.@@1@@1
7998You can't save the class module '|' over a standard module with the same name.@Save the class module to a different name, or delete the standard module first.@@1@@1
7999|9 can't delete this relationship because you don't have the Data and Misc. Objects checked out.@Check out the Data and Misc. Objects and then delete the relationship.

8000The name you entered already exists for another object of the same type in this database.@Do you want to replace the existing |?@@20@@2
8001"'|' has been changed since the last time you opened it, either by another user or because another instance of it was opened on your own machine.@Do you want to replace the changes that you or another user made?@* To save your most recent changes and discard the other user's changes or your previous changes, click Yes.
* To save this version of the object with another name, click No.@19@@2"
8002"'|' has been changed since the last time you opened it, either by another user or because another instance of it was opened on your own machine.@Do you want to replace the changes that you or another user made?@* To save your most recent changes and discard the other user's changes or your previous changes, click Yes.
* To cancel saving this version of the object, click No.@19@@2"
8003You must save a table or query before you can create a new object based on it.@Do you want to save and use the table or query to create a new object?@@13@@2
8004"The layout of '|' has been changed since the last time you opened it, either by another user or because another instance of it was opened on your own machine.@Do you want to replace the changes that you or another user made?@* To save your most recent changes and discard the other user's changes or your previous changes, click Yes.
* To cancel saving this version of the object, click No.@19@@2"
8005You can't save this object.@You must have Administer permission for the Database object in order to save modules, forms, or reports in a Design Master.@@1@@1
8006The name you entered already exists for another object of the same type in this database.@Do you want to replace the existing |?  You will not be able to undo this operation.@@20@@2
8007You cannot get into Exclusive Mode right now because this database is opened by other users or because you do not have permissions to open exclusively.@@@1@@1
8008The stored procedure executed successfully but did not return records.
8050Do you want to save changes to the design of |?@@@13@@2
8051Do you want to save changes to |?@@@19@@2
8052Do you want to delete the | and empty the Clipboard?@You tried to delete a database object that is currently on the |9 Clipboard. If you delete it from your database, you won't be able to paste it later.@@20@@2
8053Do you want to delete the |?@For more information on how to prevent this message from displaying every time you delete an object, click Help.@@21@209058@2
8054Do you want to exit |9 and empty the Clipboard?@@@19@@2
8055|9 can't change the working directory to '|.'@Verify that the drive is valid and the path is 260 characters or less in length.@@1@@1
8057|
8058Do you want to save changes to the layout of |?@@@13@@2
8059Do you want to remove the link to the |?@If you delete the link, you delete only the information |9 uses to open the table, not the table itself.@@19@@2
8060The toolbar '|' is partly unreadable.@ |9 can't display all the toolbar buttons. The specified toolbar may be in a different format than the toolbars in the current version of |9.@Click OK to close the dialog box, and then add the buttons missing from the toolbar. |9 will then update the toolbar to the latest format.@1@210064@1
8061"Are you sure you want to restore the default settings to the built-in toolbar or menu bar |?@If you previously customized, moved, changed the visibility, or otherwise altered the toolbar or menu bar, or any of the menus that cascade from it, |9 removes your changes, returns the original buttons to their original order, and shows or hides the toolbar based on the original setting.
To return the built-in toolbar or menu bar to its original state, click Yes.@@19@@2"
8063"The source application isn't responding. Do you want to continue waiting?@The DDE channel is established, but the data exchange wasn't completed in the amount of time specified in the OLE/DDE Timeout setting in the Options dialog box (Tools menu).@* To continue waiting for the data exchange to be completed, click Yes.
*  To cancel the data exchange and try again later, click No .@20@@2"
8064"This linked table has indexes that use an unsupported sort order.@If you modify this table, the Microsoft Jet database engine can't correctly maintain the table's indexes. As a result, your data may appear in the wrong order, and functions that use the table's indexes may have unexpected results.@Try one of the following:
* Cancel this operation. Use the application in which the table was created to re-create the indexes, making sure to specify an ASCII or International sort order. Then try again to link the tables.
* Use this table on a read-only basis.@1@209057@1"
8065You can't delete the table '|' until its relationships to other tables have been deleted.@Do you want |9 to delete the relationships now?@@19@@2
8067Do you want to permanently delete the |?@If you click Yes, you won't be able to undo the deletion.@@19@@2
8069|9 couldn't create the custom toolbar '|.'@@@1@@3
8071Would you like to remove the compacted database from Source Code Control?@@@19@@2
8072|9 must close the | in order to complete this operation.@Would you like |9 to close it now?@@19@@1
8073You do not have the | checked out.@|9 can't check out an object while it is open, and you can't make design changes until you check it out.@If you want to make design changes to this object, first close it, check it out, and then reopen it.@1@@1
8074|9 must save the | in order to complete this operation.@Would you like |9 to save it now?@@19@@1
8075You do not have the Data and Misc. Objects checked out.  You can't create a new table or save changes to a data access page.@@@1@@1
8076To import tables, relationships, menus, toolbars, import/export specs or data access pages you must have the Data and Misc. Objects checked out.@@@1@@2
8077Are you sure you want to cut the |?@@@19@@2
8078This object will be removed from your local database, but not from source code control.@The next time you get this database from source code control, the object will reappear.  Are you sure that you want to delete the local object?@@20@@2
8079|9 was not able to add a reference to the type library for this control because Data and Misc. Objects is not checked out.@Check out the Data and Misc. Objects and add a reference to the library '|'.@@1@@1
8080An error occurred while trying to create the linked table '|'.@Check to make sure that the source table or file is available, and then retry the operation on the Data and Misc. Objects.@@1@@1
8081You have set |1's Type property to Popup, which changes the toolbar to a shortcut menu.@The shortcut menu disappears because |9 adds |2 to the Shortcut Menus toolbar. To complete the shortcut menu, close the Toolbar Properties sheet, display the Shortcut Menus toolbar, click the Custom category, and then add the commands you want.@@1@@1
8082|9 must save the | to the current database in order to complete this operation.@Would you like |9 to save it now?@@19@@2
8086An error occured trying to add one or more references from the source code control project.@The library may not be registered on your computer.  Check your project references and add any missing references after registering the missing components that this database requires.@@1@@1
8087Restoring a database requires that no one is currently using the database.@Do you want to close all objects, select a backup file, and restore the database from backup?@@19@@2
8088Dropping a database requires that no one is currently using the database.@Do you want to close all open objects, and drop the database?@@19@@2
8090Are you sure you want to delete the conflict table |?@You will not be able to undo this operation.@@19@@2
8091This database is enabled for publication.@Do you want to delete existing publications and drop the database?@@19@@2
8092"Access could not save your project.@Do you want to cancel the close operation?
*To cancel the close operation, click Yes.
*To close without saving, click No.
@@19@@2"
8093Send a pointer to the data access page?@To send an e-mail message that contains a pointer to your data access page, click Send Pointer.  This is the recommended method. The e-mail recipient must have access to the server or public share to view the page. To send a copy of the page, click Send Copy. To cancel sending the page, click Cancel.  For more information, click Help.|7Send Pointer|7Send Copy|7Cancel@@28@613792@4
8094Send a copy of the data access page?@The contents of the page will be copied into the body of the email message, however the page will connect to the data source when the recipient views the message.  If this is correct, click OK. Otherwise, click Cancel, save the page to a server or public share, and resend a pointer to the page.  It is generally more secure to send a pointer to the page than to send a copy of the page. For more information, click Help.@@6@613791@4
8095You tried to create a group filter based on a column type which cannot be used in a filter.
8096|9 can't change the working directory to '|.'@Please enter a non-Internet location.@@1@@1
8097The connection string of this page specifies an absolute path.  The page might not be able to connect to data through the network.  To connect through a network, edit the connection string to specify a network (UNC) path.@&Don't show this warning again@553714119@@@1
8098Your computer has resumed operation after Critical Suspend mode.  Any unsaved changes might have been lost. To ensure proper operation, close and reopen any files.  Restarting |9 is recommended.

8100"The report is still more than one page wide.@To fit the report on one page decrease the report width or increase the page width.@You can decrease the report width by selecting each control that is farthest to the right, moving it to the left, and removing the extra report space. You may need to repeat this multiple times.
You can increase the page width by adjusting the page setup options.@1@@1"
8101"The report is still more than one page wide.@To fit the report on one page decrease the report width or increase the page width.@You can decrease the report width by selecting each control that is farthest to the left, moving it to the right, and removing the extra report space. You may need to repeat this multiple times.
You can increase the page width by adjusting the page setup options.@1@@1"
8400The database '|' is read-only.@You won't be able to save changes made to data or object definitions in this database.@@1@209033@1
8401You can't make changes to the database objects in the database '|.'@This database was created in an earlier version of |9.@To convert this database to the current version of |9, close the database, point to Database Utilities on the Tools menu, and then click Convert Database.@1@209029@1
8402"The file '|' already exists.@Do you want to replace the existing file?
If you want to compact or convert to a different file name, click No. Enter the new file name after the /compact or /convert option in the command line, and run the command again.@@20@@2"
8403"The setting you entered is invalid.@The database's sort order can't be updated.
The setting you entered in the New Database Sort Order option of the Options dialog box (Tools menu) isn't a valid sort order for the version of the database you are compacting.@@1@@1"
8404You can't open '|' for exclusive use because another user has the database open or because you do not have permissions to open exclusively.@|9 will open the database for shared access.@@1@@1
8405You can't make changes to the database objects in the database '|.'@This database was created in an earlier version of |9.@To convert this database to the current version of |9, close the database, point to Database Utilities on the Tools menu, and then click Convert Database.@1@@1
8406Does the first row of your data contain column headings?@@@20@@1
8407This database is a replica created in a previous version of |9.@You can view objects in this database, but you can't modify their design. If you want to modify objects in this database, convert the Design Master for this replica set to the current version of |9 and synchronize this replica.@Do you want to open the database anyway?@19@@1
8408The name you entered already exists for another custom group in this database.@Do you want to replace the existing custom group |?  You will not be able to undo this operation.@@20@@2
8409|9 has made a backup of database |1 at |2. Note: Only server-related objects have been backed up. To back up your project, click Back Up Project on the File menu
8410|9 successfully restored database |1 from its backup at |2
8411Do you want to permanently delete the custom group '|'?@If you click Yes, all shortcuts in the custom group will be deleted as well, and you won't be able to undo the deletion.@@20@@2
8412The name you entered already exists for another shortcut in this group.  @Do you want to replace the existing shortcut '|?'@@20@@2
8413The project '|' is read-only.@You won't be able to save changes made to object definitions in this project.@@1@209033@1
8414Microsoft Access encountered one or more errors during conversion. To view a summary of these errors, open the '|' table.@@@2@5257@1
8415The HTML file associated with this link has been moved, renamed, or deleted.@File: '|'|7&Update Link...|7Cancel@@35@@2
8416Renaming this user-defined function removes any existing permissions and extended properties.@Do you want to complete the rename action?@@20@@2
8500"A form with a subform object can't have its DefaultView property set to Continuous Forms.@You tried to add a subform to a form in Design view.
|9 will reset the property to Single Form.@@1@@1"
8501You can't modify this field because it is read-only.@Some fields, such as a calculated field, are read-only by design. However, any field can be read-only if its Locked property is set to Yes.@@1@600865@1
8502|9 has reached the end of the records.@Do you want to continue searching from the beginning?@@19@@2
8503|9 has reached the beginning of the records.@Do you want to continue searching from the end?@@19@@2
8504|9 finished searching the records. The search item was not found.@@@1@@1
8505Do you want to continue to search or replace?@@@19@@2
8506"There isn't enough memory to save the current filter.@Close unneeded programs. Return to the form or datasheet, and then redefine and reapply the filter.
For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@3"
8507"There isn't enough memory to execute the macro that updates the active filter.@|9 is closing the Filter window.
Close unneeded programs. Then try again to open the Filter window.
For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@3"
8508|9 can't find '|.'@The text string you entered in the Find What box can't be evaluated against the current field.@Reenter the text string so that it conforms to the data type of the field.@1@@1
8509"You won't be able to undo this Replace operation.@There isn't enough free memory to use the Undo command.
Do you want to continue?@@19@@2"
8510|9 can't save the current record.@Do you want to undo the changes to the record and continue the Paste operation?@@19@@2
8511"Records that |9 was unable to paste have been inserted into a new table called '|.'@In the Database window, open the new table to see the unpasted records.
After you fix the problems that resulted in the paste errors, copy and paste the records from the new table.@@1@@1"
8512"None of the field names you pasted onto the Clipboard match the field names on the form.@|9 treats the data in the first row on the Clipboard as field names. If you copied the data from another application, the first row of data may have taken the place of the field names.
Do you want to paste the field names in the order you defined with the Tab Order command?@@21@311022@2"
8513"Some of the field names for the data you tried to paste don't match field names on the form.@|9 treats data in the first row on the Clipboard as field names. In this case, some of those field names don't match the field names on the form.
Do you want to paste only that data whose names match the field names on the Clipboard?@@19@311022@2"
8514Do you want to suppress further error messages telling you why records can't be pasted?@If you click No, a message will appear for every record that can't be pasted.@@13@@2
8515"You copied a large amount of data onto the Clipboard.@When you copy data onto the Clipboard, only the reference to the object is copied. If you close the source document, however, |9 must paste all the data from its source. Depending on the amount of data, this can take some time.
Do you want to save this data on the Clipboard?@@19@@2"
8516"You selected more records than can be copied onto the Clipboard at one time.@Divide the records into two or more groups, and then copy and paste one group at a time.
The maximum number of records you can paste at one time is approximately 65,000.@@1@@1"
8517Do you want to suppress further error messages telling you why records can't be deleted?@If you click No, a message will appear for every record that can't be deleted.@@13@@2
8518You won't be able to undo this Replace operation.@Do you want to continue?@@19@@2
8519"You are about to delete | record(s).@If you click Yes, you won't be able to undo this Delete operation.
Are you sure you want to delete these records?@@19@@2"
8520You are about to paste | record(s).@Are you sure you want to paste these records?@@19@@2
8521"You won't be able to undo this Delete operation.@The Undo command won't be available because this operation is too large, or there isn't enough free memory.
Do you want to delete these items?@@19@@2"
8522All timers are in use.@Set the TimerInterval property back to zero so that you can start another timer.@@2@606342@1
8523Do you want to delete the custom palette information from this form or report and revert to the default palette?@@@20@@2
8524Do you want to delete the graphic from this button?@@@20@@2
8525"The remote data isn't accessible.@You tried to open a form or report that includes a DDE or DDESend function in a calculated control that specifies an OLE server application.
Do you want to start the application |?@@19@@2"
8526|9 encountered a problem while trying to switch views and must close this window.@@@1@@1
8527Do you want to delete the group section for the database object '|' and its contents? You will not be able to undo this action.@The group header or footer you want to delete contains controls and will be deleted along with the section.@@20@@2
8528Deleting these sections will also delete all controls in them. You will not be able to undo this action.@Do you want to delete these sections anyway?@@20@@2
8529Do you want to delete the selected group level(s) and all associated sections and their controls?@The field or expression you're deleting from the Sorting and Grouping box has an associated section (a header or footer) containing controls that will be deleted along with the section.

8530Relationships that specify cascading deletes are about to cause | record(s) in this table and in related tables to be deleted.@Are you sure you want to delete these records?@@21@409096@2
8531The section width is greater than the page width, and there are no items in the additional space, so some pages may be blank.@For example, the report width may be wider than the page width.@@3@@1
8532Do you want to remove this picture from the form?@@@20@@2
8533Some data may not be displayed.@There is not enough horizontal space on the page for the number of columns and column spacing you specified.@Click Page Setup on the File menu, click the Columns tab, and then reduce the number of columns or the size of the columns.@3@@1
8534When you save this form or report, any code behind it will be deleted.@You have set the HasModule property to No, creating a form or report that opens more quickly. Any macros associated with this form or report will not be affected, nor will code in separate modules that is called from this property sheet.@Are you sure you want to do this?@20@@2
8538"You are about to delete this section. @If you click Yes, the controls you placed in this section will be deleted.
Are you sure you want to delete these controls?@@20@@2"
8539Relationships that specify cascading deletes are about to cause record(s) in this table and in related tables to be deleted.@Are you sure you want to delete these records?@@21@409096@2
8540"You are about to delete one or more records.@If you click Yes, you won't be able to undo this Delete operation.
Are you sure you want to delete these records?@@19@@2"
8541|9 could not perform the delete operation. An error occurred during the delete operation, no records were deleted.
8542|9 did not detect a relationship between the fields you have chosen.  @Do you want a relationship to be created for you now?@@19@@3
8543"You are about to delete this section and all related sections. @If you click Yes, the controls you placed in these sections will be deleted.
Are you sure you want to delete these controls?@@20@@2"
8544You won't be able to undo this paste operation.@Do you want to continue?@@19@@2
8545|9 can't save the filter criteria you entered in the Insert Hyperlink dialog box. Make sure that the data access page is bound to a record source before you set the filter criteria. Also make sure that the criteria is in the form of a WHERE clause; for example, EmployeeID=[EmployeeID].
8546Current object must first be saved before exporting data to XML. @Would you like to save '|' and then continue?@@19@@2
9502Microsoft Access won't be able to undo this action or subsequent actions. To make more resources available so that Access can record further design actions, close and reopen this window. @Do you want to continue anyway?@@19@@2
9504The file '|' is not readable by JET. @If you think you have a valid JET file then this is most likely due to the recent file format change. Do you want to attempt to upgrade the database format?@@19@@2
9505"The database '|' needs to be repaired or isn't a database file.@You or another user may have unexpectedly quit |9 while a |9 database was open.
Do you want |9 to attempt to repair the database?@@19@209010@2"
9507|9 was unable to load all the library modules.@@@1@@1
9508"|9 couldn't close database '|.'@Your last change may not have been saved because an internal buffer was locked by another user (whose name was given in the previous message).
To avoid losing data, wait for the other user to finish using the record, and then click OK again.
If you click Cancel, you may lose changes that haven't been saved.@@3@@2"
9509You can't undo this command and, once it's completed, you won't be able to edit this object.@Do you want to continue anyway?@@19@@2
9510|9 can't open the file '|'.@@@1@@1
9511|@@@1@@1
9512Successfully repaired the '|' database.@@@1@@1
9513"|9 was unable to completely repair the '|' table and deleted some Memo, OLE Object, or Hyperlink field values.@To recover the data, restore from your backup copy of the database.
Note that the data in the deleted field may have been damaged by a bad sector on your hard disk. For more information on checking your disk's surface, files, and folders for errors, search the Windows Help index for 'checking for disk errors'.@@1@@1"
9514One or more records were unrecoverable and were deleted from the '|' table.@@@1@@1
9515The '|' table was truncated; data was lost.@@@1@@1
9516One or more indexes from the '|' table couldn't be repaired and were deleted.@@@1@@1
9517The Save As command can't process any subforms contained in your report.@Do you want to proceed anyway?@@19@@2
9518"An error occurred while adding this word to the custom dictionary.@* The dictionary file may be read-only.
* There may be a disk error.@@1@@1"
9519An error occurred while adding this word to the Change All list.@The dictionary may be full.@@1@@1
9520An error occurred while adding the word to the Ignore All list.@The dictionary may be full.@@1@@1
9521The specified word is too large.@Words can't exceed 64 characters.@@1@@1
9523|9 can't open the '|' custom dictionary.@@@1@@1
9524|9 can't start the spelling checker because it isn't installed.@@@1@@1
9525|9 can't open the main dictionary file.@Verify that this file has been correctly installed.@@1@@1
9526The spelling checker only works on text fields that contain text data.@You're trying to check a field with a data type other than Text or Memo.@@1@@1
9527The spelling checker can't proceed; you must first select data from a table, query, view, stored procedure, or form.@@@1@@1
9529The spelling checker can't proceed; form data is not updatable.@The form may be based on a query that isn't updatable or is only partly updatable. For information on when a query is updatable, click Help.@@2@409932@1
9530An error occurred while trying to modify the contents of field '|.'@The field may be locked or read-only, or you may not have permissions to change it. For information on security permissions and who can change them, click Help.

9531An error occurred while trying to save spelling preferences.@@@1@@1
9532The '|' field can't be modified because it's a read-only field.@@@1@@1
9533An error occurred while trying to add the word pair to the AutoCorrect list.@@@1@@1
9534The current selection does not contain any fields that can be checked for spelling errors.@You can check the spelling of text box controls with Text or Memo data types.@@1@@1
9535You entered an invalid main dictionary.@Please select a valid entry.@@1@@1
9536The spelling check is complete.@@@1@@1
9537You must restart the spelling checker for the dictionary change to take effect.@@@1@@1
9538The '|' custom dictionary doesn't exist.@Do you want to create it?@@20@@1
9539You have specified a word that isn't found in the main or custom dictionary.@Do you want to use this word and continue checking?@@20@@1
9540The main dictionary you selected can't be used.@It has not been correctly installed.@@1@@1
9541The spelling checker can't undo your last change.@The data in field '|' has been modified by another user. To resume the spelling check, click OK.@@1@@1
9542"This database must be closed before you can create a replica.@Do you want |9 to close this database and create the replica?
If you proceed, |9 will close your database and convert it to a Design Master. The database may increase in size.@@19@@2"
9543The Hangul Hanja Converter can't proceed. There is no Hangul or Hanja data to convert.@@@1@@1
9544|9 can't register the '|' custom dictionary.@@@1@@1
9545After you have converted this file to Access 2002 File Format, the new file cannot be shared with Access 2000 users or Access 97 users.@For more information about conversion, click Help.@@2@5254@1
9546This data access page was created in a previous version of Microsoft Access. To open this page in Design view, you must convert it to the current version of Access. Once you have converted this page, you can't open it in Design view in a previous version of Access.|7Con&vert|7Cancel@@@35@@
9547After you have converted this file to Access 2000 File Format, the new file cannot be shared with Access 97 users. @Any functionality specific to Access 2002 will not be available in Access 2000.@For more information about conversion, click Help.@2@5255@1
9548After you have converted this file to Access 97 File Format, any functionality specific to Access 2000 or Access 2002 will be lost.@For more information about conversion, click Help.@@2@5256@1
10000You must first save the table.@Do you want to save the table now?@@19@@1
10001You must first save the view.@Do you want to save the view now?@@19@@1
10002You must first save the stored procedure.@Do you want to save the stored procedure now?@@19@@1
10003You must first save the query.@Do you want to save the query now?@@19@@1
10004Do you want to permanently delete the selected field(s) and all the data in the field(s)?@To permanently delete the field(s), click Yes.@@19@@2
10005"There is no primary key defined.@Although a primary key isn't required, it's highly recommended. A table must have a primary key for you to define a relationship between this table and other tables in the database.
Do you want to create a primary key now?@@13@@2"
10006"Changing to this data type requires removal of one or more indexes.@You can't use indexes on fields with a Memo, OLE Object, or Hyperlink data type. If you click Yes, |9 will delete the indexes that include that field.
Do you want to continue anyway?@@20@@2"
10007Deleting field '|' requires |9 to delete the primary key.@Do you want to delete this field anyway?@@19@@2
10008"Deleting field '|' requires |9 to delete one or more indexes.@If you click Yes, |9 will delete the field and all its indexes.
Do you want to delete this field anyway?@@19@@2"
10009"You can't open the table '|' for modification.@A query or form bound to the table is open, you may not have permission to open this table in Design view, or another user has the table open.
Do you want to open this table as read-only?@If you have opened a query or form bound to this table, close it, and then try again to open the table in Design view.@19@@2"
10010Table '|' is a linked table with some properties that can't be modified.@Do you want to open it anyway?@@19@@2
10011"|9 encountered errors while converting the data.@The contents of fields in |1 record(s) were deleted.
Do you want to proceed anyway?@@19@@2"
10012"|9 can't retrieve field properties from the system tables.@The database needs to be repaired. If you click Yes, |9 will open the table in Design view. The settings of the FieldName, DataType, FieldSize, Indexed, and Primary properties will remain intact, but the settings of other field properties will be lost.
You can attempt to redefine the lost properties, but it is recommended that you restore the database from a backup copy, or close it and use the Repair Database command on the Tools menu (Database Utilities submenu).
Do you want to continue anyway?@@20@@2"
10013|9 can't save property changes for linked tables.@Do you want to continue anyway?@@19@@2
10014"|9 was unable to append all the data to the table.@The contents of fields in |1 record(s) were deleted, and |2 record(s) were lost due to key violations.
* If data was deleted, the data you pasted or imported doesn't match the field data types or the FieldSize property in the destination table.
* If records were lost, either the records you pasted contain primary key values that already exist in the destination table, or they violate referential integrity rules for a relationship defined between tables.
Do you want to proceed anyway?@@22@600922@1"
10015Changing to this data type requires removal of the primary key.@Do you want to continue anyway?@@19@@2
10016"Some data may be lost.@The setting for the FieldSize property of one or more fields has been changed to a shorter size. If data is lost, validation rules may be violated as a result.
Do you want to continue anyway?@@20@@2"
10017Your computer is out of disk space.@You won't be able to undo this paste append. Do you want to continue anyway?@@19@@2
10018"|9 was unable to append all the data to the table.@The contents of fields in |1 record(s) were deleted, and |2 record(s) were lost due to key violations.
* If data was deleted, the data you pasted or imported doesn't match the field data types or the FieldSize property in the destination table.
* If records were lost, the records you pasted contain primary key values that already exist in the destination table, or they violate referential integrity rules for a relationship defined between tables.@@2@600922@1"
10019"|9 can't find the database containing the linked table '|.'@The properties set in |9 for the linked table will be lost.
Do you want to continue with the conversion anyway?@@19@@2"
10020Data integrity rules have been changed; existing data may not be valid for the new rules.@This process may take a long time. Do you want the existing data to be tested with the new rules?@@13@@2
10021"Existing data violates the new record validation rule.@Do you want to keep testing with the new rule?
* To keep the new rule and continue testing, click Yes.
* To revert to the old rule and continue testing, click No.
* To stop testing, click Cancel.@@13@@1"
10022"Existing data violates the new setting for the '|1' property for field '|2.'@Do you want to keep testing with the new setting?
* To keep the new setting and continue testing, click Yes.
* To revert to the old setting and continue testing, click No.
* To stop testing, click Cancel.@@13@@2"
10023|9 deleted | indexes on the converted fields.@Some data did not convert properly.@@1@@1
10024"You must save the table first.@|9 can't test your data until you save the design changes you made.
Do you want to save the table now?@@19@@2"
10025"This operation will test the table's record and field validation rules, as well as the Required and AllowZeroLength properties, for all data in the table.@This process may take a long time.
Do you want to continue anyway?@@19@@2"
10026All data was valid for all rules.@@@1@@1
10027"Existing data violates the new record validation rule.@Do you want to continue testing data with this new rule?
* To continue testing for other new rule violations, click Yes.
* To continue to test only the old validation rules, click No.
* To stop testing, click Cancel.@@13@@2"
10028"The existing data violates the '|1' property for field '|2.'@If you continue testing, |9 will inform you if data violates any other property settings in the table.
Would you like to continue testing?@@19@@2"
10029"There is no primary key defined.@Although a primary key isn't required, it's highly recommended.  A table must have a primary key for you to add data to this table or to define relationships between this table and other tables in the database.
Do you want to return to table design and add a primary key now?@@13@@2"
10030"There is no primary key defined.@Although a primary key isn't required, it's highly recommended.  A table must have a primary key for you to define relationships between this table and other tables in the database.
Do you want to return to table design and add a primary key now?@@13@@2"
10031You must first save the function.@Do you want to save the function now?

10250"You can't print the scrollable (unfrozen) columns on the datasheet.@The frozen columns are wider than the page. Do you want to print just the frozen columns?@If you want to print the unfrozen columns, try one or more of the following:
* Decrease the column width and increase the row height of the frozen columns.
* Change the page orientation to Landscape in the printer Properties dialog box.
* Decrease the size of the left and right page margins in the Page Setup dialog box.@21@209172@2"
10251"The column heading is too tall to fit on the page. Part of the heading will be cut off.@Do you want to print the incomplete heading?@To prevent headings from being cut off, try one or more of the following:
* Change the page orientation to Portrait in the printer Properties dialog box.
* Decrease the size of the top and bottom page margins in the Page Setup dialog box.@19@@2"
10252"At least one column is too wide to fit on the page. Data in that column will be cut off.@Do you want to print the column with incomplete data?@To prevent data from being cut off, try one or more of the following:
* Decrease the column width and increase the row height.
* Change the page orientation to Landscape in the printer Properties dialog box.
* Decrease the size of the left and right page margins in the Page Setup dialog box.@19@@2"
10253"The row height exceeds the space between the top and bottom margins.@Do you want to print the columns with incomplete data?@To prevent data from being cut off, try one or more of the following:
* Increase the column width and decrease the row height.
* Change the page orientation to Portrait in the printer Properties dialog box.
* Decrease the size of the top and bottom page margins in the Page Setup dialog box.@19@@2"
10500"You are about to run an update query that will modify data in your table.@Are you sure you want to run this type of action query?
For information on how to prevent this message from displaying every time you run an action query, click Help.@@21@209058@2"
10501"You are about to run an append query that will modify data in your table.@Are you sure you want to run this type of action query?
For information on turning off confirmation messages for document deletions, click Help.@@21@209058@2"
10502"You are about to run a make-table query that will modify data in your table.@Are you sure you want to run this type of action query?
For information on how to prevent this message from displaying every time you run an action query, click Help.@@21@209058@2"
10503"You are about to run a delete query that will modify data in your table.@Are you sure you want to run this type of action query?
For information on how to prevent this message from displaying every time you run an action query, click Help.@@21@209058@2"
10504"You are about to run a data-definition query that may modify data in your table.@Are you sure you want to run this type of an SQL query?
If not, click No and then modify the query or close it to run later.@@19@@2"
10505"You are about to update | row(s).@Once you click Yes, you can't use the Undo command to reverse the changes.
Are you sure you want to update these records?@@19@@2"
10506"You are about to append | row(s).@Once you click Yes, you can't use the Undo command to reverse the changes.
Are you sure you want to append the selected rows?@@19@@2"
10507"You are about to paste | row(s) into a new table.@Once you click Yes, you can't use the Undo command to reverse the changes.
Are you sure you want to create a new table with the selected records?@@19@@2"
10508"You are about to delete | row(s) from the specified table.@Once you click Yes, you can't use the Undo command to reverse the changes.
Are you sure you want to delete the selected records?@@19@@2"
10509"|9 can't update all the records in the update query.@|9 didn't update |1 field(s) due to a type conversion failure, |2 record(s) due to key violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule violations.
Do you want to continue running this type of action query anyway?
To ignore the error(s) and run the query, click Yes.
For an explanation of the causes of the violations, click Help.@@21@310019@2"
10510"|9 can't append all the records in the append query.@|9 set |1 field(s) to Null due to a type conversion failure, and it didn't add |2 record(s) to the table due to key violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule violations.
Do you want to run the action query anyway?
To ignore the error(s) and run the query, click Yes.
For an explanation of the causes of the violations, click Help.@@21@310020@2"
10511"|9 can't add all the records in the update or append query.@It set |1 field(s) to Null due to a type conversion failure.
A type conversion failure is caused when the data in one or more fields doesn't match the DataType or FieldSize property in the destination table. For example, leaving blank fields in a Yes/No field or entering text in a numeric field will cause this error.
Do you want to ignore the errors and run the update or append query anyway?
To ignore the error(s) and run the query, click Yes.@@19@600922@2"
10512"|9 can't delete |2 record(s) in the delete query due to key violations and |3 record(s) due to lock violations.@Do you want to run this action query anyway?
To ignore the error(s) and run the query, click Yes.
For an explanation of the causes of the violations, click Help.@@21@310016@2"
10513The existing | will be deleted before you run the query.@Do you want to continue anyway?@@20@@2
10514You won't be able to undo the changes this action query is about to make to the data in a linked table or tables.@Do you want to run this action query anyway?@@19@@2
10515"|9 was unable to update all the records in the update query.@|9 didn't update |1 field(s) due to a type conversion failure, |2 record(s) due to key violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule violations.
For an explanation of the causes of the violations, click Help.@@2@310019@1"
10516"|9 can't append all the records to the table.@|9 set |1 field(s) to Null due to a type conversion failure, and it didn't add |2 record(s) due to key violations, |3 record(s) due to lock violations, and |4 record(s) due to validation rule violations.
For an explanation of the causes of the violations, click Help.@@2@310020@1"
10517"|9 can't add all the records in the make-table query.@It set |1 field(s) to Null due to a type conversion failure.
A type conversion failure is caused when the data in one or more fields doesn't match the DataType or FieldSize property in the destination table. For example, leaving blank fields in a Yes/No field or adding text in numeric field will cause this error.@@1@600922@1"
10518"|9 can't delete all the records in the delete query.@|9 didn't delete |2 record(s) due to key violations and |3 record(s) due to lock violations.
For an explanation of the causes of the violation, click Help.@@2@310016@1"
10519"There isn't enough disk space or memory to undo the data changes this action query is about to make.@Do you want to run this action query anyway?
For information on freeing disk space or freeing memory, search the Microsoft Windows Help index for 'disk space, freeing' or 'memory, troubleshooting'.@@19@@2"
10520Do you want to save the changes made to the SQL statement and update the property?@The RecordSource or RowSource property contained a SQL statement when you invoked the Query Builder, so the original SQL statement was modified.@To close the Query Builder without changing the original SQL statement, click No.@13@604309@2
10521Do you want to save the changes made to the query and update the property?@The RecordSource or RowSource property contained the name of a query when you invoked the Query Builder, so the original query was modified.@To close the Query Builder without changing the original query, click No.@13@604309@2
10522You invoked the Query Builder on a table.@Do you want to create a query based on the table?@@19@@2
10523"You are about to run a pass-through query that may modify data in your table.@Are you sure you want to run this type of an SQL query?
For information on how to prevent this message from displaying every time you run an SQL query, click Help.@@21@209058@2"
10524| output column(s) in the query were unnamed and will not show any data.@@@1@@1
10526Do you want to save the changes made to the SQL Statement and update the text editor?@The Stored Procedure or Function contained an SQL statement when you invoked the Query Builder, so the original SQL statement was modified.@To close the Query Builder without changing the original SQL statement, click No.@13@604309@2
10600Are you sure you want to permanently delete the selected relationship from your database?

10601A relationship already exists.@Do you want to edit the existing relationship? To create a new relationship, click No.@@13@@2
10602The field name is missing in row |.@You haven't selected a matching field for this relationship in each row of the grid.@Select fields so that the grid has the same number of fields on the left and right sides, and then try to create the relationship again.@1@@1
10603This relationship has been modified or deleted by another user since you opened the Relationships window.@Do you want to edit the relationship and overwrite the other user's changes? To update your Relationships window to include the other user's changes, click No.@@19@@2
10604This relationship has already been deleted by another user.@To update your view, click OK.@@1@@1
10605The layout of the Relationships window will be cleared.@Do you want to continue?@@19@@2
10606"You can't display queries or linked tables in the Relationships window for this database.@The database '|' was created in an earlier version of |9.
If you want to convert this database to the current version of |9, use the Convert Database command on the Tools menu (Database Utilities submenu).@@1@@1"
10607The relationship has been created as a one-to-many relationship because there are duplicate entries in the related field.@You've tried to create a one-to-one relationship, but the data in the tables suggests that a one-to-many relationship is more appropriate.@@2@411617@1
10608To create a relationship, use the mouse to drag a field from one table to another.@@@1@@1
10700This document was previously formatted for the printer |1 on |2, but that printer isn't available. Do you want to use the default printer |3 on |4?@@@19@@1
10701This document was previously formatted for the printer '|1 on |2', but that printer isn't available. The page settings shown in the Print Setup dialog box are for the current default printer '|3 on |4'.@Do you want to continue?@@19@@1
10702"Previewing or printing this PivotTable view might take a long time because it displays a large amount of detail data.  |9 might not respond for some time.@Do you want to continue?@* To reduce the amount of time required, hide most or all of the detail data in the view.
* For more information, consult Microsoft Knowledge Base article Q282315.@3@@1"
10750"You must save the macro before you run it.@Do you want to save the macro now?
* To save the macro and then run it, click Yes.
* To return to the Macro window for this macro or to the window you executed the Run Macro command from, click No.@@19@@2"
10751Some of the macro actions you are trying to save cannot be performed in Access 97. These actions will be permanently deleted from the macro in the Access 97 version of your database.@@@1@@1
10800|9 finished adding the index '|.'@Add another index from the Select Index Files dialog box, or click Close.@@1@@1
10801"The |9 index information (.inf) file for '|' already exists.@Do you want to replace the existing |9 .inf file for the dBASE or Microsoft FoxPro file you're linking?@* To create a new .inf file, click Yes.
* To use the existing file, click No.
If the .inf file contains invalid or outdated information, you must click Yes to create a new .inf file before you can link the table.@17@209186@2"
10803"The database object '|' already exists.@Do you want to replace the existing database object with the one you are exporting?
If you want to export this object without replacing the existing database object, click No. You can then export the object again and rename it in the Export dialog box.@@20@@2"
10804Not all of the import specifications could be imported due to name conflicts.  Conflicts existed in | of the specifications.@Rename the conflicting import specifications, and try the import operation again.@@1@@1
10805Invalid CDF file name
10806Related data is not supported with the live data option.
10807Please specify XML export location.
10808The current record was not unique.  All identical records were exported.
10892"A form with a bound ActiveX control or an embedded object bound to a data source can't have its DefaultView property set to Continuous Forms.@You tried to add a bound ActiveX control to a form in Design view.
|9 will reset the DefaultView property to Single Form.@@1@@1"
10893Either the data access page file has been opened by another user or you don't have write permission to the file.  If you make changes, you will have to save them to another file.
10894An unexpected error occurred while saving document properties to the data access page.
10895You tried to drop an OLE or binary column onto your data access page.  There is no HTML control which binds correctly to this column type.
10896You have chosen to permanently delete the data access page.@Do you want to delete both the link and page file(s), or delete just the link?|7&Delete Link and Files|7Delete &Link Only|7Cancel@@27@@
10897|@There is a problem with Internet Explorer registry settings.@Please reinstall Internet Explorer.@1@@1
10898|9 data access pages can only be viewed in Microsoft Internet Explorer, but it is not your default Browser.@Do you want to open Internet Explorer to view this page?@@19@@
10899A link to this data access page could not be created because the Data and Misc. Objects are not checked out.@@@1@@1
10900The save operation was successful.@A folder was created for your supporting files at the save destination.@This directory had to be created because the server does not support long file names.@1@@1
10901You must save your data access page before you can preview it.@Do you want to save now?@@19@@
10902"The data access page has been saved, but one or more of the supporting files (i.e., image, sound, video files) are missing.@You may need to:
*Delete and recreate the HTML object(s) on the page.
*Reapply the theme, if the page has a theme.@@1@@1"
10903The save completed, but files for the selected theme are missing.@Please apply a new theme to your data access page, and save again.@@1@@1
10904Do you want |9 to set the DataPageSize property of this group level to All?@@@19@@
10905"You have opened a page that was last designed using Access 2000. The page must be saved using Office XP Office Web Components before you can edit this document.
Would you like to convert this page?|7&Convert|7Cancel@@@35@@"
10950Are you sure you want to delete this account?@You can't undo the deletion of a user or group account. To restore a user or group account that has been deleted, you must recreate the account using the same name and personal identifier (PID).@@20@@2
10951"You don't have permission to modify '|.'@To modify this object, you must have Modify Design permission for it. If the object is a table, you must also have Delete Data and Update Data permissions for it.
Do you want to save a copy of the object as a new object?@@21@410222@1"
10952"You don't have permission to view this macro.@To view a macro, you must have Read Design permission for it.
Do you want to continue to run the macro?@@21@410222@2"
10953"You don't have permission to modify '|.'@To modify this object, you must have Modify Design permission for it. If the object is a table, you must also have Delete Data and Update Data permissions for it.
Do you want to open it as read-only?@@21@410222@1"
10954You changed the permissions of '|1' for '|2.'@Do you want to assign these permissions now?@@19@@2
10955"You don't have permission to open '|' for exclusive use.@|9 is opening the database for shared access.
To open a database for exclusive access, you must have Open Exclusive permission for it. For more information on permissions and who can set them, click Help.@@2@410222@1"
10956;LCID=0x0409
10957You haven't entered a workgroup ID. To ensure that your workgroup information file is unique, enter a unique workgroup ID of up to 20 numbers or letters. Continue without a workgroup ID?@@@20@@1
10958The file '|' already exists. Replace existing file?@@@20@@1
10959Workgroup Files (*.mdw) All Files (*.*)
10960Select Workgroup Information File
10961Open
10962You have successfully created the workgroup information file '|.'@@@1@@4
10963Could not find file: '|'
10964You have successfully joined the workgroup defined by the workgroup information file '|'@@@1@@2
10965It is strongly recommended that you change the system administrator (SA) password when this operation is complete.  To change the SA password point to Security on the Tools menu, and then click Set Login Password.
10966You must restart Microsoft Access for the new Security Level to take effect.

29000"There isn't enough memory to create an input area.@Close unneeded programs. Then try to create the input area again.
For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@@1@@1"
29001"|9 failed to save module '|.'@Your computer may be low on disk space.
For information on freeing memory or disk space, search the Microsoft Windows Help index for 'memory, troubleshooting' or 'disk space, freeing'.@@1@@3"
29002|9 failed to create the Visual Basic module '|.'@If your database is on a network drive, check your network connection, and then try again.@@1@@1
29003|9 failed to convert or enable your code modules.@Your computer may be low on disk space or memory.@@1@@1
29004The new procedure name you provided is invalid.@@@2@611738@1
29005The procedure '|' already exists.@Choose another procedure name.@@1@@1
29006"|9 failed to create a Debug window toolbar.@The system may be out of resource memory.@Close unneeded programs and try again.
For more information on freeing memory, search the Microsoft Windows Help index for 'memory, troubleshooting'.@1@@1"
29007During the paste or import operation, |9 failed to convert the '|' module from an earlier version of a |9 database.@Your computer may be low on disk space or memory.@@1@@1
29008|9 couldn't create storage space for a Visual Basic module.@If your database is on a network drive, check your network connection, and then try again.@@1@@3
29009"|9 couldn't open the storage space for a Visual Basic module.@Your computer may be low on disk space.
For information on freeing memory or disk space, search the Microsoft Windows Help index for 'memory, troubleshooting' or 'disk space, freeing'.@@1@@3"
29010The function name is too long.@|9 will truncate the function name to 255 characters.@@1@411738@1
29011"|9 failed to save the database.@Your computer may be low on disk space.
For information on freeing memory or disk space, search the Microsoft Windows Help index for 'memory, troubleshooting' or 'disk space, freeing'.@@1@@3"
29013"This action will reset the current code in break mode.@Do you want to stop the running code?@* To halt the execution of the program so the Module window can be closed, select Yes.
* To leave the code in the current state, select No.@20@@1"
29014You can't add a reference to a |9 workgroup.@@@2@613780@1
29015You can't remove this reference.@|9 needs this reference in order to work properly.@@1@@1
29016You can't add a reference to the open database.@@@1@@1
29017The database | was created in an earlier version of |9.@Convert this database to the current version of |9 by using the Convert Database command on the Tools menu (Database Utilities submenu).@@1@@1
29018You can't use a standard module for this operation.@@@1@@1
29019"The module name '|' is invalid.@* The module name may start with the prefix Form_ or Report_.
* The module can't be named Forms, Reports, Modules, Application, Screen, Assistant, CommandBars, References, or DoCmd.
* The module name may have too many characters.@@2@611734@1"
29020Another user has modified this database.@To see the current version, close the database and open it again.@@1@@1
29021This operation isn't available while there is a module in break mode.@Reset the executing code and try the operation again.@@1@@1
29022"There were compilation errors during the conversion or enabling of this database.@The database has not been saved in a compiled state. The performance of this database will be impaired because |9 will need to recompile the database for each session.
For information on improving performance, click Help.@@2@611705@1"
29023There are calls to 16-bit dynamic-link libraries (.dll) in modules in this database.@These won't work under Microsoft Windows 95 or Microsoft Windows NT.@Change your code to call equivalent 32-bit dynamic-link libraries (.dll).@2@611961@1
29024"The current user account doesn't have permission to convert or enable this database.@To convert or enable a database, ensure the following:
* You must join the workgroup that defines the user accounts used to access the database.
* Your user account must have Open/Run and Open Exclusive permissions for the database object.
* Your user account must have Modify Design or Administer permissions for all tables in the database, or it must be the owner of all tables in the database.
* Your user account must have Read Design permission for all objects in the database.
* Request that other users close the database.@@2@77316@"
29025There are calls to 16-bit dynamic-link libraries (.dll) in modules in this database.@These won't work under Microsoft Windows 95 or Microsoft Windows NT.@Translate these calls to equivalent 32-bit dynamic-link libraries.@2@611961@
29026"The database that you are trying to open or convert is currently in use, or you do not have permission to open it exclusively.@When you convert a database, or the first time you open an earlier version database, another user can't have the database open.@Try one of the following:
* Request that other users close the database.
* Using the version of |9 in which the database is written, have your workgroup administrator grant you the permission to open the database exclusively.
Multiple users can share the database after you convert it, or after you open it for the first time.@1@109027@1"
29027"|9 was unable to save the project.@Another user is saving the project now.
Do you want to retry?@@23@@1"
29028The Save operation failed.@@@1@@1
29029"You are trying to open a read-only database.@The first time you open an earlier version database, you must be able to write changes to the database.
* The database file's read-only attribute may be set; clear this attribute.
* You may have chosen the Open Read Only command in the Open dialog box. Don't choose this command the first time you open the database.
* Your license to use this application may have expired.@@1@@1"
29030|9 can't establish a reference to the specified database.@The referenced database can't be found, or it's locked exclusively by another user so it can't be opened.@Restore the referenced database from a backup copy or ask the user that has the database locked to open the database in nonexclusive mode.@1@@1
29031|9 can't create or open the requested database now.@The database may be locked exclusively by another user.@@1@@1
29032The '|' module  is open; |9 can't set the permissions on an open module.@@@1@@1
29033|9 can't add references to a replicated database; changes will be ignored.@@@1@@1
29034|9 is unable to import the module from the source replica.@Synchronize the source database.@@1@@1
29040|9 is currently unable to rename the form, report, or module to '|'.@Close the database, reopen it, and then try the rename operation again.@@1@@1
29041One or more forms or reports contains an ActiveX control that could not be loaded.@These controls will not function properly until you register them, open the forms or reports in Design view, and save the forms or reports.@@1@@1
29042One or more forms or reports contains an ActiveX control that could not be loaded.@These controls will not function properly until you register them, open the forms or reports in Design view, and save the forms or reports.@@1@@1
29043"|9 has converted the code in '|' to your current version of Visual Basic.@To improve the performance of this database, do the following:
1. Open any module in this database in Design view.
2. On the Debug menu, click Compile And Save All Modules.@@1@@1"
29044DAO version 3.0 is not compatible with this version of Microsoft Access.@Create a reference to DAO version 3.5. For information on setting references, click Help.@@2@613780@1
29045You can't import, export, create, modify, or rename any forms, reports, pages or modules in an MDE database.@@@1@@1
29046You can't create a module for a form or report if it is read-only, or if the database is read-only.@@@1@@1
29047|9 was unable to open the Visual Basic project for this database.@Another user is saving the project now. Do you want to retry?@@23@@1
29048MDE databases can't reference MDB databases.@MDE databases can only reference other MDE databases or type libraries.@@1@@1
29049You can't refer to a form or report module from Form view or Report preview if the form's or report's HasModule property is set to No.@Switch to Design view or set the HasModule property to Yes in order to refer to the module.@@1@@1
29050|9 couldn't compile this database because one or more references couldn't be resolved.@The database has not been saved in a compiled state. The performance of this database will be slower because |9 will need to recompile the database for each session.@For information on improving performance, click Help.

29051"The current user account doesn't have permission to make an MDE file from this database.@To make an MDE file, do the following:
* Join the workgroup that defines the user accounts used to access the database.
* Make sure the user account has Open/Run and Open Exclusive permissions for the database object.
* Make sure the user account has Modify Design or Administer permissions for the MSysModules2 table in the database.
* Request that other users close the database.@@1@@1"
29052The Visual Basic for Applications project in the database '|' can't be converted to the current Visual Basic format.@If the database is an MDE, you will need to rebuild the MDE from the source MDB. If you don't have the source MDB, you will need to obtain a new version of the MDE that is compatible with the current version of Visual Basic.@@1@@1
29053|9 can't create any more controls on this form or report.@If you have deleted controls from this form or report in the past, you may be able to rename the form or report and then add more controls to it.@@1@@1
29054|9 can't add, rename, or delete the control(s) you requested.@@@1@@1
29055The form or report '|' has too many controls.@Reduce the number of controls on the form or report before using it in this version of |9.@@1@@1
29056Someone else is using '|' and the Visual Basic for Applications project does not match your version of Visual Basic.@You need to open the database exclusively in order to upgrade the Visual Basic for Applications project in this database.@@1@@1
29057The database '|' is read-only and the Visual Basic for Applications project does not match your version of Visual Basic.@You need to open the database read-write in order to upgrade the Visual Basic for Applications project in this database.@@1@@1
29058You can't create a module for a form or report while an instance of the form or report is in browse mode.@@@1@@1
29059|9 was unable do display the module.@@@1@@1
29060File not found.@@@1@@1
29061"There were compilation errors during the conversion or enabling of this database.@This might be due to old DAO syntax that is no longer supported.
For an example on how to fixup the code, click Help. @@2@611705@1"
29062The module name '|' is misspelled or refers to a module that doesn't exist.@If the invalid module name is in a macro, an Action Failed dialog box will display the macro name and the macro's arguments after you click OK. Open the Macro window, and enter the correct module name.@@1@@1
29063The Visual Basic for Applications project in the database is corrupt.
29064You do not have exclusive access to the database at this time.  If you proceed to make changes, you may not be able to save them later.
29065|9 can't save design changes or save to a new database object because another user has the file open. To save your design changes or to save to a new object, you must have exclusive access to the file.
29066You do not have exclusive access to the database.  Your design changes cannot be saved at this time.  Do you want to close without saving your changes?
29067You do not have exclusive access to the database.  You cannot convert this database at this time.
29068|9 cannot complete this operation. You must stop the code and try again.
29069"|9 cannot save the digital signature at this time.@* You may be in a database under Source Code Control.
* You may be in a database which is read only.@@1@@1"
29070Your |9 database or project contains a missing or broken reference to the file '|1'|2@* To ensure that your database or project works properly, you must fix this reference. @@1@5043@1
29071Missing or broken VBE reference to the file '|1'.
29072|9 has detected corruption in this file. To try to repair the corruption, first make a backup copy of the file. Then, on the Tools menu, point to Database Utilities and click Compact and Repair Database. If you are currently trying to repair this corruption then you will need to recreate this file or restore it from a previous backup.@@@2@5117@1
29073You do not have exclusive access to the database.  You cannot continue with the Source Code Control command.
29074|9 failed to create the Visual Basic module.@If your database is on a network drive, check your network connection, and then try again.@@1@@1
30000|9 could not find the SQL Server specified.  Verify that the server name is correct.
30001|9 could not find the database on the server.  Verify that the database name is correct.
30002|9 could not log on to the server.  Verify that the log on information is correct.
30004The Default Max Records setting must be between 0 and 2147483647.
30005Missing SQL command
30006Access was not able to perform this operation because the project is not connected to a SQL Server database.
30007Can't sort on one or more fields specified in 'Order By' property or sorting/grouping dialog.
30008The server you are trying to access is case sensitive.  Objects of the same name but of different case are not supported.  Using these objects may result in a loss of data.
30009Another user or application has deleted this record or changed the value of its primary key.
30010Cannot apply Filter on one or more fields specified in the Filter property.
30011Cannot get column information for the database object being browsed.
30012A Server Filter cannot be applied to a stored procedure Record Source. Filter not applied.
30013You can't update the record because another user or application deleted it or changed the value of its primary key.
30014The data was added to the database but the data won't be displayed in the form because it doesn't satisfy the criteria in the underlying record source.
30015The specified record source contains duplicate names for some output fields.  Use aliases in your SELECT statement to give each field a unique name.
30016The field '|' is read only.
30017This database is not enabled for publication.
30018Cannot create objects of type '|' against current SQL backend.  Please check your permissions and server setup.
30019Microsoft Access cannot copy a table with a name that is longer than 64 characters.
30020Cannot find column '|'.
30021Cannot use domain functions on stored procedures.
30022The Access project could not be opened.  You may not have adequate permissions, or the project may be read-only.
30023Cannot use domain functions on scalar functions.
30024Your password will not be encrypted before it is saved to the file.@Users who view the source contents of the file will be able to see the account user name and password.|7&Save Password|7Cancel@@36@5127@
30025Invalid SQL Statement. Check the server filter on the form record source
30026Access is unable to connect to '|1' database on the '|2' server.  Make sure that the database still exists and that the server is running.
30027The value you entered is not consistent with the data type or length of the column.
30028The database name for the attached database file is blank.  Enter a name for your database.
30029This version of Microsoft Access doesn't support design changes with the version of Microsoft SQL Server your Access project is connected to. See the Microsoft Office Update Web site for the latest information and downloads (on the Help menu, click Office on the Web). Your design changes will not be saved.

31000You must specify criteria for all conditional formats.@@@1@@1
31001A conditional format expression can't be longer than 946 characters.@@@1@@1
31002|9 can't modify the control's conditional formats right now.@Your program tried to modify the conditional format of a control while the conditional format was being evaluated.@@1@@1
31003The setting for this property is too long.@You can enter up to either 255 or 2,048 characters for this property, depending on the data type.@@1@@1
31004"The value of an (AutoNumber) field cannot be retrived prior to being saved.

Please save the record that contains the (AutoNumber) field prior to performing this action.@@@1@@1"
31500|9 can't send this format in a mail message.@To send this format in a mail message, click Export on the File menu, or use the OutputTo method to create the files and attach them to a mail message.

31501The selected transform file '|' cannot be found. Please select a different transform.
31502|9 can't find the Microsoft Office international dynamic-link library (DLL).@Reinstall Microsoft Office.@@1@@3
31503The specified transform did not successfully convert the data.  Select a different transform.
31504The data was transformed in a format that cannot not be imported.
31505"Are you sure you want to remove '|' from the list of available transforms?

This will not actually delete the transform file."
31506The selected transform file cannot be found. Select a different transform or remove the transform. Then try to export again.
31507Invalid field data type.
31508Cannot load the Office Web Components@Access had a problem loading the Office Web Components Version 9.0.  Try going through set-up to re-install them@@1@@3
31509Cannot load the Office Web Components@Access had a problem loading the Office Web Components Version 10.0.  Try going through set-up to re-install them@@1@@3
31510|9 can't load the dynamic-link library |. @You need to resolve the failure and start Access again.@@1@@3
31511"You have chosen to alter the mode in which SQL syntax will be interpreted in this database. This will mean: @* Existing queries may return different results or not run at all.
* The range of data-types and reserved words will change.
* Different wildcards will be used. @It is recommended that you make a backup copy of this database before continuing. If you agree to continue, Access will close this database, compact it, and re-open in the new mode. Select OK to continue.@5@324324@1"
31512|9 can't open the mail session.@You may not have configured an e-mail client on this computer.  Ensure that your e-mail software has been installed and configured properly.@@1@@1
31513All open objects must be closed prior to converting to a different version.@Do you want |9 to close the objects?@@19@@2
31514|9 can't convert this database to a different version because one or more objects are open.@Close all objects and try again.@@1@@3
31515"Your database is using SQL Server Compatible Syntax (ANSI 92) for which Access 2000 has limited support.  This will mean:@* Access 2000 users may not be able to see some queries.
* Existing queries may return different results or not run at all.
* The range of data-types and reserved words will change.
* Different wildcards will be used. @It is recommended that you change the SQL Server Compatible Syntax (ANSI 92) setting before converting this database to the Access 2000 file format.  Select Cancel to abort the conversion process and change the SQL Server Compatible Syntax (ANSI 92) setting.@5@324324@1"
31516|9 can't convert this database to the requested version because it has been 'enabled' to work with newer versions of |9 than it was originally created with.@You can convert this database to a newer format, and then retry this operation with the newly converted database.@@1@@1
31517|9 can't convert this database to the requested version because it is from an older version of |9.@You can convert this database to a newer format, and then retry this operation with the newly converted database.@@1@@1
31518The following controls contain expressions that can't be represented in a |9 project PivotTable or PivotChart view:  |.@Do you still want to switch to PivotTable or PivotChart view?@@19@@2
31519You cannot import this file.@You cannot import a text file unless it has one of these extensions: |.@@1@@1
31520You cannot import this file.@You cannot import a text file that has one of these extensions: |.@@1@@1
31521Cannot establish connection to the server.@|@@1@@1
31522Microsoft SQL Server Desktop Engine must be on the machine running |9.@@@1@@1
31523|9 was unable to open the file '|'. The file may not be an Access file, the path or filename specified may be incorrect, or the file can not be opened exclusively. To repair the file manually, on the Tools menu, point to Database Utilities, and then click Compact and Repair Database.@@@1@@1
31524|9 can't transfer the user-defined function '|'. User-defined functions can only be transferred between Microsoft SQL Servers that are version 8.0 or higher.@@@1@@1
31525The selected object can't be pasted because the version of either the source or the destination server is less than 7.0.@|9 can only copy and paste this object if both Microsoft SQL Servers are version 7.0 or higher.@@1@@1
31526You cannot create a |9 ADE or MDE file from a database saved in |9 2000 format.@Convert the database to the current version of |9.  Then create the ADE or MDE file.@@1@@1
31527Path not found: |.@@@1@@1
31528Table '|' is in use. Please close the table and retry import.@@@1@@1
31529View '|' is in use. Please close the view and retry import.@@@1@@1
31530Procedure '|' is in use. Please close the procedure and retry import.@@@1@@1
31531|9 cannot create table(s) using the information contained in the document(s) you are trying to import.@@@1@@1
31532|9 was unable to export the data.@@@1@@1
31533Invalid filename.@@@1@@1
31534"Your database is using SQL Server Compatible Syntax (ANSI 92) for which Access 97 has limited support.  This will mean:@* Existing queries may return different results or not run at all.
* The range of data-types and reserved words will change.
* Different wildcards will be used. @It is recommended that you change the SQL Server Compatible Syntax (ANSI 92) setting before converting this database to the Access 97 file format.  Select Cancel to abort the conversion process and change the SQL Server Compatible Syntax (ANSI 92) setting.@5@324324@1"
31535Invalid parameters for ExportXML.@Press Help for more information.@@2@5170@1
31536The XML schema properties do not match the existing table structures.@Overwrite existing structures?@@19@@1
31537There is already an object named '|' in the database.@@@1@@1
31538|9 cannot create this file. To create the file, you must give the file a unique name, provide a valid connection string and user ID, and you must have the necessary connection and file creation permissions.@@@1@@1
31539There was an error loading the XSL transformation file '|1'. Please make sure that the file is a properly formatted XSL file and is the correct file to use for the data supplied.  |2
31540There was an error loading the XML data file '|1'. Please make sure that the file is a properly formatted XML file. |2
31541|9 cannot open this file.@This file is located outside your intranet or on an untrusted site.  |9 will not open the file due to potential security problems. @To open the file, copy it to your machine or an accessible network location.@2@@1
31542The startup action associated with this file may not be safe.  Do you want to execute the startup action as you open the file?@@@22@@1
31543The startup action associated with this file may not be safe.  If you choose not to execute the startup action, |9 will not open the file.  Do you want to execute the startup action and open the file?@@@22@@1
31544|9 cannot open this file.@The author of this file has set it to open only when a startup action is executed, and |9 is currently set to disable startup actions.@To address this problem, contact the author of the file or your system administrator.@2@@1
31545|9 cannot open this file.@The Internet Security Zone Manager is missing or not correctly installed and therefore the safety of this file cannot be verified.@To address this problem, reinstall Microsoft Internet Explorer or the appropriate Office System Pack.@2@@1
31546This database is a Microsoft Access 7.0/8.0/9.0 Design Master.@If you click OK, the database you selected will be renamed to |1 and then converted to |2. Everyone using a replica of this database will have to upgrade to Microsoft Access 2002 after the next synchronization.@@4@@2
31547|9 cannot export this object to XML when it is open in Print Preview. Close the object and try again.@@@1@@1
31548|9 cannot export a table to XML when it is open in Design. Close the object and try again.@@@1@@1
31549Finished importing document '|'.
31550Not all of your data was successfully imported.  Error descriptions with associated row numbers of bad records can be found in the |9 table '|'.

31551Only XML files can be exported to an Internet address (http://, ftp://). Enter a path that points to a location on your computer or on the network.@@@1@@1
31552The document(s) you are importing contain XML Schema (XSD) information created outside |9. XML Schema information created outside |9 is not supported. If you continue, |9 will only import the data, and ignore the XML Schema.@Would you like to continue?@@19@@1
31553The Smart Tag property value cannot exceed 1024 characters.@@@1@@1
31554You are attempting to apply more smart tags then the system can handle.@Please uncheck some of the selected tags.@@1@@1
31555"The specified transform did not successfully convert the data.

Would you like to save a copy of the Data to Export at '|' for troubleshooting?"
31556To view object dependencies or change the Track name AutoCorrect info option, |9 must close all objects and update dependency information.@This could take several minutes. Do you want to continue?@@21@@2
31557|9 cannot update dependecy information because one or more objects are open.@Close all objects and try again.@@1@@3
31558The Track name AutoCorrect info option generates name maps for the objects in the database. This may take several minutes.@Do you want to leave this option turned on?@@3@@1
31559Microsoft Access could not connect to the site you specified.  Verify the address of the site or contact your site administrator.
31560The site you specified does not support linking to a Microsoft Access database. The site must be running SharePoint Team Services "v2.0" Beta 1 from Microsoft
31561The site you specified does not support importing data to a Microsoft Access database. The site must be running Windows SharePoint Services from Microsoft.
31562The site you specified does not contain any list.  Verify the address of the site, or contact your site administrator.
31563|9 could not enable name AutoCorrect for one or more objects because Access could not open and save the objects. An open or save operation could have failed due to one or more of the following reasons - the object is already open, you don't have permissions to open the object in Design view, the database is read-only, or the source of a linked table could not be found.@@@2@553713743@1
31564To generate object dependencies, the Track name AutoCorrect info option must be turned on.@Enable name AutoCorrect and continue?@@5@553713744@1
31565Dependency information needs to be updated before you can view object dependencies.  This could take several minutes.@Do you want to continue?@@5@553713744@1
31566The object dependencies feature is not enabled for this database because dependency info needs to be updated.@@@5@553713744@1
31567The object that you have selected in the Object Dependencies pane no longer exists in the database.@@@1@@1
31568You do not have the necessary permissions to generate dependency information for the selected object.@@@2@553713744@1
31569To view dependency information, you must select a table, query, form, or report.@@@1@553713742@1
31570Dependency information cannot be generated because name maps are either missing or outdated. Turn on the Track name AutoCorrect info option, make sure you have sufficient permissions to open an object in Design view, and make sure the database is not read-only.@@@2@553713744@1
31571Dependency information cannot be generated because name maps are outdated, and the database is read-only.@@@2@553713744@1
31572|9 cannot generate dependency information if objects are open. Save and close all objects.@@@2@553713744@1
31573|9 cannot generate dependency information for objects in a project.@@@1@@1
31574Microsoft Access cannot export unbound forms or reports as XML documents.
31575All open objects must be closed prior to backing up your database or project.@Do you want |9 to close the objects?@@19@@2
31576|9 cannot backup this database or project because one or more objects are open.@Close all objects and try again.@@1@@3
31577Microsoft Access could not connect to the site you specified. Verify the address of the site or contact your site administrator.
31578The table could not be exported because you do not have sufficient permissions. Please contact your site administrator.
31579A list with the specified name already exists. Type a different name and try again.
31580The list name cannot contain any of the following character: \/:*?"<>|. Type a different name and try again.
31581|9 cannot generate dependency information for objects in a replica database.@@@1@@1
31582Finished importing from '|'.
31583Finished linking to '|'.
31584Finished exporting table '|1' to '|2'.
31585The site you specified does not support importing data from a Microsoft Access database. The site must be running Windows SharePoint Services from Microsoft.
31586|9 cannot generate dependency information because the Track name AutoCorrect info option is turned off. This option cannot be turned on because the database is either read-only or you do not have sufficient  permissions.@@@1@@1
31587Error exporting picture file '|1' to specified path '|2'.
31588Specified transform failed to successfully transform your data.  |
31589A list named '|' already exists.  You must either use a different name or go to the site and delete the list.
31590|9 is unable to export '|' to SharePoint due to limitations on the number of times each data type can appear in a SharePoint list.@See help to find out exactly what the restrictions are and for details on how to create a query that will define the SharePoint list that you would like to create.@@2@553714028@1
31591Cannot find the specified schema file '|'. Remove or update the file reference and try to import again.

3.Excel
196609"The cell or chart you are trying to change is protected and therefore read-only.

To modify a protected cell or chart, first remove protection using the Unprotect Sheet command (Tools menu, Protection submenu). You may be prompted for a password."
196610Not enough system resources to display completely.
196611Database range is not defined.
196612Criteria range is not defined.
196613Extract range is not defined.
196614Database or list range is not valid.
196615Criteria range is not valid.
196616Extract range is not valid.
196617"This selection is not valid.
There are several possible reasons:

• Copy and paste areas cannot overlap unless they're the same size and shape.
• If you're using the Create command on the Name submenu of the Insert menu, the row or column containing the proposed names won't be included in the definitions of the names.
• If the names you're creating are listed in a row or column, you must select more than one row or column.
• If you clicked the Table command on the Data menu, you must select a single rectangle that is more than one row high and more than one column wide."
196618| is too long.
196619Formula is too long.
196620The text string you entered is too long. Reduce the number of characters used or cancel the entry.
196621Number format is too long.
196622"The formula you typed contains an error. Try one of the following:

• Make sure you've included all parentheses and required arguments.
• To get assistance with using a function, click Function (Insert menu).
• If you include a reference to another sheet or workbook, verify that the reference is correct.
• If you are not trying to enter a formula, avoid using an equal sign (=) or minus sign (-), or precede it with a single quotation mark ( ' ).
• For more information about common formula problems, click Help."
196623Name in formula is unclear.
196624"The formula you typed contains an error.

• For information about fixing common formula problems, click Help.
• To get assistance in entering a function, click OK, then click Function on the Insert menu.
• If you are not trying to enter a formula, avoid using an equal sign (=) or minus sign (-), or precede it with a single quotation mark (')."
196625That function is not valid.
196626Your formula is missing a parenthesis--)  or  (. Check the formula, and then add the parenthesis in the appropriate place.
196627"You've entered | arguments for this function.

To get help with entering arguments for the function, click OK to close this message. Then, on the formula bar, click the equal sign button (located to the left of the equal sign in your formula)."
196628"Your formula is incomplete. You must include an operand following each operator. For example, =A1+A2+ is missing an operand following the second plus sign. Try one of the following:

• Add the missing operand to the formula, or delete the extra operator.
• If you are not trying to enter a formula, avoid using an equal sign (=) or minus sign (-), or precede it with a single quotation mark (')."
196629That name is not valid.
196630The text you entered is not a valid reference or defined name.
196631"Microsoft Excel cannot use the number format you typed.

Try using one of the built-in number formats. On the Format menu, click Cells, and then click the Number tab. Select the category you want, and then choose other options.

For more information about custom number formats, click Help."
196632Selection is too large.
196633Cannot paste that macro formula onto a worksheet.
196634"Microsoft Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following:

• If you accidentally created the circular reference, click OK. This will display the Circular Reference toolbar and help for using it to correct your formula.
• For more information about circular references and how to work with them, click Help.
• To continue leaving the formula as it is, click Cancel."
196635"Microsoft Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following:

• If you accidentally created the circular reference, click OK.
•To display the Circular Reference toolbar, point to Toolbars on the View menu, and then click Circular Reference."
196636Microsoft Excel cannot calculate a formula. There is a circular reference in an open workbook, but the references that cause it cannot be listed for you. Try editing the last formula you entered or removing it with the Undo command (Edit menu).
196637"You've selected a single cell for the print area.

• If this is correct, click OK.
• If you selected a single cell by mistake, click Cancel, select the cells you want to include, and then click Set Print Area again."
196638A workbook reference cannot be used here.
196639Only a bubble chart series may have a bubble size reference.
196640A bubble chart series must have a bubble size reference.
196641Series order must be an integer between 0 and 255.
196642The series must contain at least one value in order to create a chart.
196643Formula must refer to a single cell or result in a text string.
196644"A formula in this worksheet contains one or more invalid references.

Verify that your formulas contain a valid path, workbook, range name, and cell reference."
196645The reference is not valid. References for titles, values, or sizes must be a single cell, row, or column.
196646Reference is not valid.  Reference for error bars must be a row or column.
196647Reference is not valid.  Reference must be a simple external reference to a worksheet.
196648Reference is not valid.  Reference must be to an open worksheet.
196649That command cannot be used on multiple selections.
196650"The command you chose cannot be performed with multiple selections.

Select a single range and click the command again."
196651"There are hidden rows or columns in your selection.
Do you want to delete the hidden cells in your selection?"
196652Cannot use a name that refers to nonadjacent cells.
196653Cannot use that command on overlapping selections.
196654That command cannot be used with selections that contain entire rows or columns, and also other cells. Try selecting only entire rows, entire columns, or just groups of cells.
196655"Microsoft Excel cannot access the file '|'. There are several possible reasons:

• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open workbook."
196656Cannot access directory '|'.
196657'|' cannot be accessed. The file may be read-only, or you may be trying to access a read-only location. Or, the server the document is stored on may not be responding.
196658"Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.

• To make more memory available, close workbooks or programs you no longer need.

• To free disk space, delete files you no longer need from the disk you are saving to."
196659The range you entered is not valid. Be sure to include both the sheet name and the range reference. Example: Sheet1!A1:G15.
196660Cannot open Microsoft Graph chart gallery files.
196661The disk is full.
196662Unable to read file.
196663"The file could not be accessed. Try one of the following:

• Make sure the specified folder exists.
• Make sure the folder that contains the file is not read-only.
• Make sure the file name does not contain any of the following characters:  <  >  ?  [  ]  :  | or  *
• Make sure the file/path name doesn't contain more than 218 characters."
196664Cannot access read-only document '|'.
196665| file format is not valid.
196666A file named '|' already exists in this location. Do you want to replace it?
196667Replace existing user-defined format?
196668You cannot save this workbook with the same name as another open workbook or add-in. Choose a different name, or close the other workbook or add-in before saving.
196669| is already open. Reopening will cause any changes you made to be discarded. Do you want to reopen |?
196670Document is not completely saved.

196671Delete file '|'?
196672Delete this user-defined format?
196673Maximum number of data series per chart is 255.
196674The maximum number of data points you can use in a data series for a 2-D chart is 32,000. If you want to use more than 32,000 data points, you must create two or more series.
196675The maximum number of data points you can use in a data series for a 3-D chart is 4,000. If you want to use more than 4,000 data points, you must create two or more series.
196676Maximum number of dates on a 3D time-scale axis is 4000.
196677"Negative or zero values cannot be plotted correctly on log charts. Only positive values can be interpreted on a logarithmic scale. To correct the problem, do one of the following:

• Enter only positive values (greater than zero) in the cells used to create the chart.
• In the chart, click the axis you want to change. On the Format menu, click Selected Axis. Click the Scale tab, and then clear the Logarithmic Scale check box."
196678No RETURN() or HALT() function found on macro sheet.
196679Reference must be to a macro sheet.
196680Invalid register id, or function not registered yet.
196681"Your file could not be printed due to an error on |. There are several possible reasons:

• There may not be enough memory available. Try closing files and programs you aren't using.
• If you use a network for printing, there may be a problem with the network connection or the printer driver.
• There may be loose cables or a bad connection between your computer and printer.

For more information about troubleshooting printing problems, click Help."
196682"Microsoft Excel cannot move the page break because doing so would reduce the scale to below the minimum 10 percent.

• To print more data on the page, set the scale on the Page tab of the Page Setup dialog box (File menu).
• To remove a manual page break, select the row above a horizontal page break or the column to the right of a vertical page break, and then click Remove Page Break (Insert menu). If your data is too large to fit on the page at the current scale, an automatic page break (marked with a dashed line) will be inserted instead."
196683Could not start Microsoft Script Editor
196684No point number is specified.
196685No series number is specified.
196686The tick mark intervals for your chart must be greater than zero.
196687This custom chart type does not exist. To create a new custom chart type with this name, format the chart the way you want. On the Chart menu, click Chart Type, and then click the Custom Types tab. Click Add to add this chart to your list of custom chart formats.
196688No custom chart name specified.
196689Custom chart name must not exceed 31 characters.
196690The description you typed is too long. The maximum number of characters you can use is 250.
196691The chart name you specified cannot be used. You can use any character in a chart name except a colon (:), backslash (\), vertical bar (|), less-than sign (<), greater-than sign (>), question mark (?), left or right square bracket ([  ]), or asterisk (*).
196692The name 'Default' is reserved. To use the active chart as the default, click Set As Default Chart and specify a different name.
196693Error in deleting custom chart.
196694Error in adding custom chart.
196695Error accessing User-defined custom chart file.
196696Microsoft Excel cannot use CHART.XLT. On the Chart menu, click Chart Type, and then click the Custom Types tab. Click Add to add this chart to your list of custom chart formats.
196697"You can add the chart template as a user-defined autoformat and use it later by choosing Autoformat from the Format menu.
• To add this template as an autoformat, choose OK.
• To continue saving the file as a workbook template, choose Cancel."
196698Cannot print chart in draft quality.
196699No more custom number formats can be added.
196700'|' is read-only. To save a copy, click OK, then give the workbook a new name in the Save As dialog box.
196701'|' is currently in use. Open as read-only?
196702Cannot access '|'. The file may be in use.
196703The sort reference is not valid. Make sure that it's within the data you want to sort, and the first Sort By box isn't the same or blank.
196704This list is outlined. Only the summary data will be sorted.
196705Cannot modify or delete arrays in shared workbooks.
196706You cannot change part of an array.
196707Cannot change part of a table.
196708Cannot change part of a subscriber.
196709"You cannot change, move a part of, or insert cells in a PivotTable report. If you want to insert cells on the worksheet, drag the entire report out of the way. To move or add data to a report, do one of the following:

• Use the PivotTable and PivotChart Wizard to add fields to the report.
• Hide or group items in a row or column field.
• Modify the source data."
196710A PivotTable report cannot overlap another PivotTable report.
196711"Your new report will use less memory if you base it on your existing report |, which was created from the same source data. Do you want your new report to be based on the same data as your existing report?

• If you click Yes, you will save memory and your workbook file will be smaller.
• If you click No, the two reports will be separate."
196712Microsoft Excel turned off the background query option so that the macro you recorded can run correctly. For more information, see Microsoft Excel Help.
196713"Not enough memory is available to save the data along with the PivotTable report.

•To continue saving the report without the data, click OK. When you open the saved file, you will have to refresh the report before you can use it.
•To stop the save, click Cancel. You may be able to save the data with the PivotTable report by saving in another format, such as Microsoft Excel Workbook format."
196714Cannot change part of a merged cell.
196715You can't use this command on a list or range that contains merged cells.
196716Cannot insert or delete a column in an area in which the AutoFilter command is turned on.
196717Cannot delete built-in format.
196718Cannot save to that name.  Another document is linked to a document with that name.
196719Value must be a number.
196720The numbers you specified can't be used because the interval for the minor unit tick marks must be less than or equal to the interval for the major unit tick marks.
196721The numbers you specified for the axis values can't be used, because the maximum axis value must be greater than the minimum axis value.
196722Unit of log scale must be at least 10.
196723'|' is not a valid name.
196724Replace existing definition of '|'?
196725Your entry cannot be used. An integer or decimal number may be required.
196726Integer is not valid.
196727Scroll value must be between 0 and 30000.
196728The scroll value maximum cannot be less than the scroll value minimum.
196729That name already exists.
196730Microsoft Excel cannot find any references to replace.
196731Microsoft Excel cannot find the data you're searching for.
196732Cannot find matching data to delete.
196733Microsoft Excel cannot find any data to replace. Check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected sheet. Excel cannot replace data on a protected worksheet.
196734Shortcut key must be a letter.
196735Column width must be between 0 and 255 characters.
196736Row height must be between 0 and 409.
196737Cannot open the Clipboard.
196738Cannot empty the Clipboard.
196739Unable to record.
196740"To prevent possible loss of data, Microsoft Excel cannot shift nonblank cells off the worksheet.

Try to locate the last nonblank cell by pressing CTRL+END, and delete or clear all in cells between the last cell and the end of your data.  Then select cell A1 and save your workbook to reset the last cell used.

Or, you can move the data to a new location and try again."
196741Cannot shift objects off sheet.
196742Fixed objects will move.
196743Cannot link to the file.
196744The change to the DDE or OLE link has failed.
196745Number must be greater than or equal to zero.
196746Microsoft Excel cannot paste the data.
196747Cannot insert object.
196748"There is a problem with the printer driver. You might be low on memory or your printer driver may need to be reinstalled.

Try closing documents and programs you don't need, or reinstall the printer driver."
196749File error: data may have been lost.
196750File error. Some number formats may have been lost.

196751"Microsoft Excel cannot display some of the graphics in this file because the | graphics filter is not installed.

• To display the graphics correctly, exit Microsoft Excel, do not save changes to the file, run Setup again, and select the appropriate filter.
•  If you do not install the appropriate filter, Microsoft Excel inserts a placeholder for each graphic it cannot display. The placeholders overwrite existing graphics if you save the file."
196752Macintosh PICT
196753"A document with the name '|' is already open. You cannot open two documents with the same name, even if the documents are in different folders.
To open the second document, either close the document that's currently open, or rename one of the documents."
196754"This workbook contains links to other data sources.

• If you update the links, Excel attempts to retrieve the latest data.
• If you don't update, Excel uses the previous information."
196755"The information cannot be pasted because the | area and the paste area are not the same size and shape. Try one of the following:

• Click a single cell, and then paste.
• Select a rectangle that's the same size and shape, and then paste."
196756Cannot paste a table onto a macro sheet.
196757Some custom formats will not fit on the destination sheet.
196758"'|' could not be found. Check the spelling of the file name, and verify that the file location is correct.

If you are trying to open the file from your list of most recently used files on the File menu, make sure that the file has not been renamed, moved, or deleted."
196759Cannot access '|'.
196760Cannot save '|' because the volume is locked.
196761Matching records will be permanently deleted.
196762The password you supplied is not correct. Verify that the CAPS LOCK key is off and be sure to use the correct capitalization.
196763"A formula or sheet you want to move or copy contains the name '|', which already exists on the destination worksheet. Do you want to use this version of the name?
• To use the name as defined in the destination sheet, click Yes.
• To rename the range referred to in the formula or worksheet, click No, and enter a new name in the Name Conflict dialog box."
196764Name cannot resemble a reference.
196765Name cannot be the same as a built-in name.
196766Name already exists on destination sheet.
196767Data on the Clipboard is not the same size and shape as the selected area. Do you want to paste the data anyway?
196768No link to paste.
196769Unable to paste link.
196770Microsoft Excel cannot find a match.
196771Cell with looping function should not contain anything else.
196772Do you want to save the changes you made to '|'?
196773Reference must be to a single cell.
196774Only macro names are valid.
196775Microsoft Excel can convert only one column at a time. The range can be many rows tall but no more than one column wide. Try again by selecting cells in one column only.
196776Error in parse line.
196777Cannot find data source.
196778Reference is not valid.
196779Input cell reference is not valid.
196780Destination reference is not valid.
196781Consolidation reference is not valid.
196782Invalid sheet for consolidation.
196783Data will permanently lose accuracy.
196784"If you turn off the Accept Labels In Formulas option, Microsoft Excel replaces any labels you used in formulas with cell references. Your formulas will continue to work correctly.

You cannot undo this change. Do you want to continue?"
196785Custom data_form is not properly defined.
196786Cannot justify cells containing numbers or formulas.
196787Text will extend below selected range.
196788Error in dialog box at |.
196789"You are pasting a new data series, which will affect the existing information along the category axis in your chart. You can either replace the existing data categories or add new categories to the existing categories in your chart. What do you want to do?

• To permanently replace the existing categories with categories based on the new data series, click OK.
• To add new categories based on the data series but still keep the existing categories in the chart, click Cancel."
196790There are more new points than series in the chart. Do you want to add the new points to the existing series?
196791Displayed record will be permanently deleted.
196792Cannot extend list or database.
196793No cells were found.
196794You must enter a valid reference you want to go to, or type a valid name for the selection.
196795Microsoft Excel cannot convert some of the cells. The total number of errors found is |.
196796Cannot read record |.
196797"A formula in a cell | could not be converted because it contains a function that is not available in the file format to which you are saving. If you continue the save, the formula and result will be saved, but the function itself will be converted to an error value.

Do you want to see additional errors as they occur so you can fix them later?

• To see each error as it occurs, click Yes.
• To get only a count of the number of errors when Microsoft Excel is finished saving, click No.
• To cancel the save, click Cancel."
196798Cannot convert 3-D reference: |.
196799To create a chart, click in the Data range box. Then, on the worksheet, select the cells that contain the data and labels you want in the chart.
196800To create a chart, click Add to add a data series. Then, type the series information or enter cell references in the Name and Values boxes.
196801To create this stock chart, arrange the data on your sheet in this order: high price, low price, closing price. Use dates or stock names as labels.
196802To create this stock chart, arrange the data on your sheet in this order: volume traded, high price, low price, closing price. Use dates or stock names as labels.
196803To create this stock chart, arrange the data on your sheet in this order: opening price, high price, low price, closing price. Use dates or stock names as labels.
196804To create this stock chart, arrange the data on your sheet in this order: volume traded, opening price, high price, low price, closing price. Use dates or stock names as labels.
196805To combine chart types in a chart, click a data series, click Chart Type on the Chart menu, and then click the chart type you want. Do this for each data series you want to change.
196806"You cannot combine 2-D and 3-D chart types. Do you want to change the data series from the 3-D chart so that you can combine the two charts into a 2-D chart?

• To change the data series so they can be combined to make a 2-D chart, click Yes.
• To cancel combining the charts, click No."
196807"You cannot combine 2-D and 3-D chart types. Do you want to change the data series from the 2-D chart so that you can combine the two charts into a 3-D chart?

• To change the data series so they can be combined to make a 3-D chart, click Yes.
• To cancel combining the charts, click No."
196808References in series formulas must be external references to worksheets.
196809Cannot delete last entry in legend.
196810Redefine '|' based on selection?
196811Redefine '|' scenario based on current cell values?
196812Macro with name '|' already exists. Replace existing macro?
196813Cannot create Personal Macro Workbook.
196814Do you want to save the changes you made to the Personal Macro Workbook? If you click Yes, the macros will be available the next time you start Microsoft Excel.
196815Personal Macro Workbook in the startup folder must stay open for recording.
196816You cannot save the Personal Macro Workbook in the startup folder. Save it elsewhere now and move it to the startup folder later.
196817Microsoft Excel cannot save the user-defined chart because the chart gallery file is currently in use or does not exist. Click OK, and then change the gallery file name or location before you save.
196818Microsoft Excel cannot save the user-defined chart gallery.
196819Cannot change this cell while a macro is paused.
196820Too many fields in the data form.

196821Cannot create data form for a database in which all columns are hidden.
196822The destination range is not large enough to accommodate all copied rows. Data below the destination range will be lost. Continue copying anyway?
196823You can only copy filtered data to the active sheet.
196824Microsoft Excel found a row of data immediately above your list or database. If the row contains column labels, you should include it in your selection so that the Filter command will work properly. Do you want to include the row in your selection?
196825This removes the subtotals and sorts again. If you want to sort the subtotaled groups, choose the Cancel button; then collapse the outline and try again.
196826If you want to sort the subtotaled groups collapse the outline and try again.
196827This command subtotals lists in place. To display and remove subtotals in a PivotTable report, use the Field Settings command.
196828Too many different cell formats.
196829Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete.
196830Sheet name is too long.
196831Only worksheets and charts will be saved.
196832Cannot save as a WK3 file if there are no worksheets in the workbook.
196833"There is a large amount of information on the Clipboard. Do you want to be able to paste this information into another program later?

• To save it on the Clipboard so that you can paste it later, click Yes.
• To delete it from the Clipboard and free memory, click No."
196834Cannot quit Microsoft Excel.
196835Save '|' with references to unsaved documents?
196836Help reference is not valid.
196837Cannot delete '|'.
196838Margins do not fit page size.
196839The number must be between |0 and |1. Try again by entering a number in this range.
196840"Microsoft Excel cannot find '|0' on '|1'. There are two possible reasons:

• The name you specified may not be defined.
• The name you specified is defined as something other than a rectangular cell reference.
Check the name and try again."
196841Merge styles that have the same names?
196842Database is hidden.
196843Cannot enter a formula in a data form.
196844Cannot save as that name. Document was opened as read-only.
196845Save changes to selected series?
196846Dialog box contains too many items.
196847Cannot open protected file.
196848Font name is too long.
196849Text extends beyond worksheet.  Some text will be lost.
196850Command not available at cell:
196851Microsoft Excel did not find anything to print.
196852Cannot create backup file.  Save '|' without backup?
196853File format is not valid.
196854Cell must contain a value.
196855Reference must be on the active sheet.
196856Cell must contain a formula.
196857Formula in cell must result in a number.
196858Calculation is incomplete. Recalculate before saving?
196859"Links to '|' were not updated because '|' was not recalculated before it was last saved.

• To update links with current values in '|', click OK.
• To cancel updating the links to '|', click Cancel."
196860'|' contains incomplete calculation.  Continue reporting each error?
196861Operation failed. '|0' is reserved by |1.
196862Operation failed. '|' is write reserved.
196863Confirmation password is not identical.
196864Password contains characters that will not transfer correctly to Microsoft Excel, Macintosh edition. For best results, use a password that contains only characters a-z, numbers 0-9 and special symbols, such as !,@,#,$,%,^,&,*,(,),+,=.
196865Cannot link to Microsoft Excel version 1.5 file.
196866'|0' is being modified by |1. Open as read-only?
196867'|' should be opened as read-only unless you need to save changes to it. Open as read-only?
196868Cell with block IF function should not contain anything else.
196869"Microsoft Excel cannot create or use the data range reference because it is too complex. Try one or more of the following:

• Use data that can be selected in one contiguous rectangle.
• Use data from the same sheet."
196870You cannot use this command on a protected sheet. To unprotect the sheet, use the Unprotect Sheet command (Tools menu, Protection submenu). You may be prompted for a password.
196871Reference must be to a single cell on the active sheet.
196872The macro '|' cannot be found.
196873Series definition must include a | reference.
196874"|0 may contain features that are not compatible with |1.  Do you want to keep the workbook in this format?

• To keep this format, which leaves out any incompatible features, click Yes.
• To preserve the features, click No. Then save a copy in the latest Excel format.
• To see what might be lost, click Help."
196875This workbook contains features that are not supported by the file format that you selected. To avoid the possible loss of formatting or information, save a copy in the most recent Microsoft Excel Workbook format and then resend it.
196876"Excel could not save all the data and formatting you recently added to |0.

• To return to your workbook without saving click Cancel.
•If you want to continue saving changes without repairing the problem, click OK."
196877Cannot find |0, which has been assigned to run each time |1 is opened. Continuing could cause errors. Cancel opening |1?
196878Cannot find |0, which has been assigned to run each time |1 is closed. Continuing could cause errors. Cancel closing |1?
196879Cannot find |0.
196880Cannot start the source application for this object.
196881"That control can only be used while the worksheet is displayed in a separate window. Do you want to open a window for the worksheet?

• Click Yes to open a separate window in which you can edit the worksheet and use the control. When you are finished, click Save and then click Exit on the File menu to return to the original window.
• To continue working in the current window without using the control, click No."
196882Cannot find the source application for this embedded object.
196883Sheet is protected with password.  File format cannot be used.
196884Sheet is protected with password and formulas are displayed.  File format cannot be used.
196885Value is too large
196886Value is too small
196887Unable to import file
196888Unable to combine file
196889Unable to extract file
196890Cannot import from an open file
196891Cannot extract to an open file
196892Directory does not exist.
196893Matrix must be square.
196894Matrices are incompatible for multiplication.
196895Output range extends beyond edge of worksheet.
196896Cannot split when windows are locked.
196897Reference cannot be to a closed sheet.
196898Lotus 1-2-3 Help demonstrations cannot be recorded.  Stop recording and continue?
196899Cannot post instructions because a worksheet is not active.
196900Cannot post instructions because worksheet objects are currently hidden or protected.

196901Cannot post instructions because worksheet is protected.
196902Not enough data for Graph demonstration.
196903Cannot demo with custom menus.
196904You cannot use Help for Lotus 1-2-3 Users while in group edit mode.
196905Can only paste a subscriber onto a worksheet or macro sheet.
196906Missing NEXT function for loop.
196907Missing loop.
196908Missing IF.
196909Missing an END.IF function.
196910Duplicate menu bar name.
196911Cannot enable built-in commands.
196912Names cannot look like references.
196913References in object formulas must be external references to worksheets.
196914Microsoft Excel cannot perform this action on nonadjacent cells. To complete the task, select one area at a time, and try again.
196915Multiple selection usage is not valid.
196916Cannot change linked data: |
196917Source worksheet is closed.
196918Data point corresponds to a formula on a macro sheet.
196919Cell in source worksheet is locked.
196920Cell in source worksheet contains nonnumeric data.
196921Category range contains nonnumeric data.
196922Stationery document is not saved in Normal format. Opening as a nonstationery file.
196923Series formula is too long.
196924Text in your macro may need to be translated manually.
196925Cannot cut part of a publisher.
196926No objects found.
196927Unable to save external link values.
196928Cannot print chart with the current scale and paper size. Select a larger scale percentage or a smaller paper size.
196929Update embedded objects?
196930Workbook is protected and cannot be changed.
196931This chart plots data from more than one worksheet.  Double-click the series you want to change, and then select the Name and Values tab to change the series' plot data.
196932This chart plots constant data.  Double-click the series you want to change, and then select the Name And Values tab to change the series' plot data.
196933This chart plots data from a closed worksheet. Use the Links command on the Edit menu to open the source workbook.
196934Cannot run '|'. The program or one of its components is damaged or missing.
196935A surface chart must contain at least two series.
196936This button can be used only with Microsoft Windows for Pen Computing.
196937"This file is not in a recognizable format.

• If you know the file is from another program which is incompatible with Microsoft Excel, click Cancel, then open this file in its original application. If you want to open the file later in Microsoft Excel, save it in a format that is compatible, such as text format.
• If you suspect the file is damaged, click Help for more information about solving the problem.
• If you still want to see what text is contained in the file, click OK. Then click Finish in the Text Import Wizard."
196938Cannot rename a sheet to the same name as another sheet, a referenced object library or a workbook referenced by Visual Basic.
196939Specify the location and file name where you want to publish the data. Example: http://Myserver/Mydoc.htm
196940"|0 is a |1. Do you want to overwrite it with the latest Excel format?

• To overwrite it, click Yes.
• To save in the current format, click No."
196941"While renaming a sheet or chart, you entered an invalid name. Try one of the following:

• Make sure the name you entered does not exceed 31 characters.
• Make sure the name does not contain any of the following characters:  :  \  /  ?  *  [  or  ]
• Make sure you did not leave the name blank."
196942Cannot enter an array formula into a range of cells which are not all locked or all unlocked.
196943Print titles must be contiguous and complete rows or columns.
196944Macro error at cell:
196945Macro interrupted at cell:
196946Illegal reference argument at:
196947Formula is too complex to be assigned to object.
196948Cannot open a copy while the template '|' is open.
196949File not loaded completely.
196950The version of XLINTL.DLL is incorrect. Continuing can cause severe errors. Quit Microsoft Excel?
196951"This file was created using a later version of Excel. There is a remote possibility that certain workbook properties specific to the later version may be lost if you save the file in this version.

If you want to preserve the original file, click Cancel, then rename the new version using the Save As command (File menu).

Continue saving?"
196952A sheet in the workbook you are trying to save is password protected.  Password protected sheets cannot be saved in a Web Page.  To save this file as a Web Page, you must first remove the password.
196953Macro name is not valid.
196954This font style name does not exist.
196955Select a font name.
196956"Microsoft Excel cannot determine which row in your list or selection contains column labels, which are required for this command.

• If you want the first row of the selection or list used as labels and not as data, click OK.
• If you selected a subset of cells in error, select a single cell, and try the command again.
• To create column labels, click Cancel, and enter a text label at the top of each column of data.
• For information about creating labels that are easy to detect, click Help."
196957Delete entire row?
196958Entire subtotal row will be deleted.
196959Because your source data has automatic subtotals, Microsoft Excel cannot create a PivotTable report from it. For information about how to remove the subtotals, click Help.
196960For your changes to the standard font to take effect, you must quit and then restart Microsoft Excel.
196961This command or function is not available when multiple workbooks are selected.
196962Embedded object data will be lost. Continue?
196963Cannot use object linking and embedding.
196964Microsoft Excel is waiting for another application to complete an OLE action.
196965"The object is not responding because the source application may be busy.

• To check the source application, click Cancel, switch to the source application, and dismiss any open dialogs. Then try again.
• To continue waiting, click OK."
196966"You are about to activate an OLE object that may contain viruses or may otherwise be harmful to your computer. You may want to verify that this object comes from a trustworthy source before you continue.

Do you want to continue?"
196967Not enough stack space to run macro.
196968Your changes will be lost if you update without saving. Continue to update?
196969"A workbook must contain at least one visible worksheet.

To hide, delete, or move the selected sheet(s), you must first insert a new sheet or unhide a sheet that is already hidden."
196970"The selected file type does not support workbooks that contain multiple sheets.

• To save only the active sheet, click OK.
• To save all sheets, save them individually using a different file name for each, or choose a file type that supports multiple sheets."
196971Do you want to save changes before switching file status?
196972Cannot open Microsoft Excel Add-In for editing.  Please edit the source document instead.
196973There is already a macro assigned to that key. You should assign a different keyboard shortcut.
196974Cannot load an empty Microsoft Excel 4.0 workbook.
196975Microsoft Excel workspaces cannot contain Microsoft Excel 4.0 workbooks.  Click Save As on the File menu, then select Microsoft Excel Workbook in the Save As Type box to save the Microsoft Excel 4.0 workbook in the most recent Excel format.
196976Cannot edit a macro on a hidden workbook. Unhide the workbook using the Unhide command.
196977Only Visual Basic macros can be deleted using this dialog. Delete Microsoft Excel 4.0 macros by editing the macro sheets.
196978Cannot save to that file format. There are references to other sheets in this Workbook. Copy this sheet to a different Workbook first, then try again.
196979Excel cannot open Access .mdb files directly. To import Access data into Excel, use the Get External Data command: In Excel, point to Get External Data on the Data menu, click New Database Query, and then create a query to retrieve the data. For information about creating a query, see Help in Excel.
196980Excel cannot open FoxPro .dbc files. To import FoxPro data into Excel, use the Get External Data command: In Excel, point to Get External Data on the Data menu, click New Database Query, and then create a query to retrieve the data. For information about creating a query, see Help in Excel.
196981Document saved successfully. Cannot reopen the saved document due to low memory. Please close the document.
196982Cannot print file.
196983Excel cannot publish the range | because the range refers to cells that are not in a single, contiguous (rectangular) range.
196984Excel cannot open this Quattro Pro for Windows file.  The Quattro Pro Converter may not be installed or the file type may not be supported.
196985Cannot open Lotus 123 file.
196986Macro cannot be edited inplace.
196987Cannot edit macro on protected sheet or book.
196988The workbook you are trying to save is password protected.  Password protected workbooks cannot be saved in a Web Page.  To save this file as a Web Page, you must first remove the password.
196989This operation will cause some merged cells to unmerge.  Do you wish to continue?
196990The selection contains multiple data values.  Merging into one cell will keep the upper-left most data only.
196991The selection contains multiple data values.  Merging into one cell will keep the upper-right most data only.
196992This operation requires the merged cells to be identically sized.
196993Cannot merge overlapping ranges.
196994Array formulas are not valid in merged cells.
196995"You are about to sort together columns from multiple external data ranges. If you continue, your column sorting, filtering, and layout changes for these ranges won't be retained. Do you want to continue?

• To sort the columns together, click Yes. You can resume retaining these changes by refreshing the ranges.
• To cancel the sort operation, click No."
196996That cell does not contain a valid label.
196997That cell does not contain '|'.  Use it anyway?
196998Row labels must be one column wide.
196999The dates you specified for the axis values can't be used, because the maximum axis value must occur at a later date than the minimum axis value.
197000You customized the axis of your chart by specifying a base unit for the time scale. However, the numbers you specified for the Major Unit and Minor Unit options can't be used with the base unit you specified. Please try again.

197001The date you entered is not a valid date. Please try again.
197002Cannot close a Document Object with a VBA ply active.  Please switch to another ply.
197003Some chart types cannot be combined with other chart types. Select a different chart type.
197004"
Do you want to continue saving or publishing as an interactive Web page?
"
197005You must specify a single, contiguous (rectangular) range of cells.
197006Cannot place chart on a hidden sheet.
197007This sheet already exists. Place chart embedded in existing sheet?
197008To move a chart from its own sheet to an object, you must first remove all chart objects embedded in the sheet.
197009This sheet exists and your chart is embedded in it. Specify a different sheet name.
197010"You cannot change the chart type to a stock chart. A stock chart requires three, four, or five series of data to plot a single point. Do one of the following:

• To apply the stock chart to all of the series, click OK. A stock chart will be created only if there are enough data series on your sheet.

• Click Cancel to close this message. Then select a different chart type that can use a single data series, for example, the line chart type."
197011"You cannot combine the bubble chart type with other chart types. Do you want to change the chart type of all the data series in the chart to the chart type you selected?:

• To change the chart type for all the data series, click Yes.
• To keep the current chart, click No."
197012To create a bubble chart, you must specify at least two values per data point. On the Series tab of the Source Data dialog, type the values you want or enter cell references in the Y Values and Sizes boxes.
197013A bubble chart requires at least two values per data point. The last series added is incomplete because not enough data was supplied.
197014You cannot use an XY (Scatter), Bubble, or Stock chart type with a chart that has been created from PivotTable data. Please select a different chart type.
197015The chart type you selected cannot be used for a PivotChart report, which is a chart created with PivotTable data. Please select a range that does not include a PivotTable report, or click the Back button to return to the previous step and choose a chart type other than XY (Scatter), Bubble, or Stock.
197016The chart type you selected cannot be used for a PivotChart report, which is a chart created with PivotTable data. Please select a range that does not include a PivotTable report.
197017The Series tab is not available because you are creating a chart from a PivotTable report. If you do not want to create this kind of chart--a PivotChart report--your data range must refer to cells that are outside of a PivotTable range.
197018You cannot edit a PivotChart series with the formula bar. You can change the view of data in a PivotChart report by reorganizing its fields or items, or by changing its associated PivotTable report.
197019You are attempting to create a chart by using a PivotTable report in another workbook. This will result in a static chart that cannot be updated. If you want to create a PivotChart report, or a chart that dynamically updates like the PivotTable report, the chart must be located in the same workbook as its associated PivotTable report.
197020The source data of a PivotChart report cannot be changed. You can change the view of data in a PivotChart report by reorganizing its fields or items, or by changing its associated PivotTable report.
197021"Are you sure that you want to use a | chart type as the default for creating new charts?

• To use this chart type as the default for all future charts, click Yes. The program will automatically use this chart type when creating a chart, but you can change the chart type after it's created.
• To cancel changing the default chart type, click No."
197022Are you sure that you want to set the current chart as the default chart type for creating new charts?
197023Are you sure that you want to set '|' as the default chart type for creating new charts?
197024Deleting the Default chart type will reset it to the original default type. Continue?
197025Cannot set the default chart type.
197026Cannot apply the default chart type to the selected data.
197027Please select a chart type from the list to continue.
197028The axis display unit must be a numeric value greater than 0 or one of the predefined values in the Display units list.
197029Microsoft Excel reached the end of the workbook. Do you want to continue reviewing from the beginning of the workbook?
197030"Shared workbook from Microsoft Excel 95 must be opened read-only.

To edit the workbook, click OK, then click Save As on the File menu and save the workbook with a new name. You can then save the new workbook as a shared workbook, if you want. For more information, click Help."
197031Excel cannot merge another file that is already open or has the same name as the current file. To merge a file copied from this shared workbook, you must first rename and close the copied file.
197032Review not available with hidden objects.
197033Comment Not Found
197034Cannot create a new chart when multiple sheets are selected.
197035New styles cannot be added in shared workbooks.
197036Please select one of the values.
197037"No changes were found with the specified properties.

To highlight all changes, uncheck the When, Who, and Where options."
197038Only changes which have been saved can be listed on the history sheet.
197039Cannot modify the History sheet.
197040"'|' contains sound notes.

If you save '|' in Microsoft Excel 97-Excel 11 Beta format, the sound notes will be permanently lost. To keep the sound notes, make a copy of the workbook, and then open the copy only in Microsoft Excel 5.0 or Microsoft Excel 95.

Do you want to save this workbook in Microsoft Excel 97- Excel 11 Beta format?"
197041An error occurred while importing this file. |
197042"Excel could not start the e-mail program.

Check your network connection. Make sure Office is installed correctly, your e-mail program is set up correctly, and you can connect to your e-mail server."
197043You must drag a field to the PivotTable Data area before you can select items for this field.
197044That name is already assigned to a source sheet. Charts cannot be source sheets.
197045Selection is too large. Continue without Undo?
197046Document not saved.
197047Document not saved. Any previously saved copy may have been deleted.
197048No source references specified for consolidation.
197049Cannot open consolidation source file '|'.
197050No data was consolidated.
197051Cannot add duplicate source reference.
197052Consolidate_Area reference is not valid.
197053Source reference overlaps destination area.
197054Cannot create links to consolidation sheet.
197055Cannot show outline symbols because no outline exists on the active worksheet. Create an outline?
197056Cannot ungroup.  To start an outline, select the detail rows or columns and group them.
197057Modify existing outline?
197058Cannot create an outline.
197059Style name is not valid.
197060Style '|' not found.
197061A group must contain two or more sheets.
197062Input and output ranges overlap.
197063The selection already contains only visible cells.
197064Cannot use that command while in Data Entry mode.
197065Data entry range is too small for this action.
197066Insert new page into printer
197067Microsoft Map is no longer supported with Microsoft Excel
197068Cannot end macro in a menu.
197069Macro error at cell:
197070Macro interrupted at cell:
197071"Because you selected only one cell and the surrounding cells are blank, Microsoft Excel cannot determine which cells to apply the autoformat to.

Select the range of cells you want to format, and click AutoFormat again."
197072The command could not be completed because no range was found. Select a single cell within the range and try the command again.
197073Do you want to continue checking at the beginning of the sheet?
197074The spelling check is complete for the |.
197075Cannot initialize spelling checker.
197076Incompatible version of spelling checker.
197077Invalid |.
197078Cannot read |.
197079"An error occurred while adding this word to the custom dictionary.

• The dictionary file may be read-only.
• There may be a disk error. "
197080Cannot create |.
197081Cannot share |.
197082Custom dictionary is full.
197083Cannot open |.
197084Dictionary is too large.
197085The word '|' is not in the dictionary. Do you want to change it anyway?
197086Do you want to continue Hangul Hanja Conversion at the beginning of the sheet?
197087Hangul Hanja Conversion is complete for the |.
197088Not a workbook.
197089Cannot find that sheet in workbook.
197090Workbook has no bound sheets.
197091"You tried to open a Lotus 1-2-3 FMT or FM3 file created by the Impress add-in.

Microsoft Excel uses these files for formatting information, but cannot open them directly. Instead, open the WK1 or WK3 file associated with the FMT or FM3 file you want. The corresponding FMT or FM3 file information will be incorporated when the file is opened in Microsoft Excel."
197092Do you want to replace the contents of the destination cells?
197093List will be permanently deleted.
197094Cells without simple text were ignored.
197095Some changing cells are part of an array or table and cannot be changed.
197096Too many changing cells.  A scenario can have no more than 32 changing cells.
197097Too many result cells.  A report can have no more than 32 result cells.
197098Scenario names must be unique.
197099Names and results of formulas were converted into values.
197100At least one of the changing cells you specified contains a formula.  Formulas in changing cells will be replaced by constant values when you show a scenario.

197101Too many scenarios to fit in the report.  Some were left out.
197102Some scenario values were too long and had to be truncated.
197103Changing Cells are required.
197104You must specify result cells when creating a scenario PivotTable report.
197105Scenario information will be lost.
197106Cannot change a cell containing a string of more than 255 characters.
197107Cannot open PivotTable source file '|'.
197108The PivotTable field name is not valid. To create a PivotTable report, you must use data that is organized as a list with labeled columns. If you are changing the name of a PivotTable field, you must type a new name for the field.
197109"This command requires at least two rows of source data. You cannot use the command on a selection in only one row. Try the following:

• If you're using an advanced filter, select a range of cells that contains at least two rows of data. Then click the Advanced Filter command again.
• If you're creating a PivotTable report or PivotChart report, type a cell reference or select a range that includes at least two rows of data."
197110Not all source records have been copied.
197111No item of this name exists in the PivotTable report. Rename '|1' to '|0'?
197112Cannot move a data field button that does not appear in the PivotTable report.
197113"At least one item must be showing.

If you don't want to show the field at all, cancel the current operation, and then drag the field out of the report.."
197114Too many items are hidden. Unhide some items to continue.
197115A field in your source data has more unique items than can be used in a PivotTable report. Microsoft Excel may not be able to create the report, or may create the report without the data from this field.
197116Cannot create a PivotTable report on a hidden sheet.
197117Because the query for this page field does not return any items, the options for the field cannot be changed. If you expected the field to have items, go back to Microsoft Query and change the query so that the result set includes data for this field (see Help in Microsoft Query).
197118"Microsoft Excel cannot refresh a PivotTable report until refresh of the external data range on which the report is based is complete.

When refresh is finished (the spinning world icon no longer appears in the status bar), click a cell in the report, and then click Refresh Data on the PivotTable toolbar."
197119Cannot show detail data for that selection. If the source database has more detailed data that you want to view, click OK, click an item in a row or column field, and then click Show Detail on the PivotTable toolbar.
197120No data fields are available in the OLAP Cube.
197121"The organization or content of the OLAP cube has been changed and, as a result, no data items are available for display in this PivotTable report.

Consult your database administrator."
197122Cannot show or hide detail for this selection.
197123Cannot change this part of a PivotTable report.
197124Cannot edit a |0 in group edit mode.
197125Cannot edit |0 on protected sheet.
197126Cannot edit |0 in data entry mode.
197127"You cannot create or make changes to PivotTable reports in a shared workbook. If you copy a report and paste it in a shared workbook, only the cell contents are pasted.

To make a copy that you can edit and rearrange, paste the report into a workbook that is not shared."
197128You cannot create or make changes to PivotChart reports in a shared workbook. To make a copy that you can edit and rearrange, paste the PivotTable report that the PivotChart report depends on into a workbook that is not shared, and create a PivotChart report from it.
197129Please wait until Microsoft Excel has finished refreshing the PivotTable report, and then try the command again.
197130Microsoft Excel is placing the PivotTable report on a new sheet, so that it won't overwrite existing data in your workbook. When you run the macro you just recorded, Microsoft Excel won't automatically place the report on a new sheet.
197131"The Top 10 AutoShow options are turned on for this field.  To retain this setting, click OK, and then click Cancel in the list of items for the field.

If you click OK and then click OK in the list of items for the field, the Top 10 AutoShow options will be turned off, and the items selected in the list will be displayed instead of the AutoShow items."
197132Cannot paste items into a different field.
197133Cannot paste items into a different group of items.
197134Cannot change that part of a PivotTable report.
197135Cannot enter a formula for an item or field name in a PivotTable report.
197136Cannot enter a null value as an item or field name in a PivotTable report.
197137You cannot hide this selection.
197138Cannot move subtotals or block totals.
197139Cannot edit subtotal, block total, or grand total names.
197140Cannot delete every item of '|' field from the PivotTable report.
197141Cannot hide the (all) item of a page field.
197142Cannot delete the last item in a page field.
197143Cannot move a PivotTable report to a macro sheet.
197144You have not specified any source ranges for your PivotTable report. Type or select at least one range in the Ranges box before choosing Next or Finish.
197145The PivotTable report will not fit on the sheet. Do you want to show as much as possible?
197146Cannot determine which PivotTable field to sort by.
197147Cannot sort items in a page field.
197148Cannot create a PivotTable report on a macro sheet.
197149Cannot move a data field button to a page orientation.
197150Cannot paste a link into a PivotTable report.
197151Cannot make this change. The PivotTable report does not contain this field.
197152'|' is not an item of this field.
197153"There is not enough memory available to create the PivotTable report. To make more memory available, try the following:

• Reduce the number of column or row fields you include in the PivotTable report.
• Close files or programs you aren't using."
197154Number must be greater than zero.
197155Cannot group that selection.
197156Cannot ungroup that selection.
197157"You cannot group items in this field because it's set to query for each item separately when it's in the page position.

Drag the field to the page position, double-click the field button, click Advanced, and click the Retrieve External Data For All Page Field Items option. Then try grouping the items again."
197158Ending value must be greater than starting value.
197159This PivotTable report is not valid.
197160"You must specify a data field. The available fields appear on the right side of the Layout dialog box. Drag a field and drop it in the area labeled DATA.

For more information about dragging fields to summarize data, click OK, and then click the Help button in the dialog box."
197161You have entered an invalid source range for your PivotTable report. Enter a valid range in the Ranges box and then choose Add.
197162A PivotTable report with that name already exists on the destination sheet.
197163PivotTable name is not valid.
197164PivotTable field name already exists.
197165Replace crosstab table with PivotTable report?
197166Replace crosstab table with PivotTable report, ignoring criteria range?
197167Excel could not get the source data for the PivotTable report from the disk.
197168The Refresh Data operation changed the PivotTable report.
197169Microsoft Excel did not receive any information from Microsoft Query.
197170To use this feature, you must have a World Wide Web browser, such as Microsoft Internet Explorer.
197171This Web query returned no data. To modify the query, click OK, click the name of the external data range in the name box on the formula bar, and then click Edit Query on the External Data toolbar.
197172Microsoft Query could not be started because it isn't installed. You can install Query by running the installation program you used to install Office or Excel. The Query option is in the Office Tools category.
197173Microsoft Query is already running, but is not responding to Microsoft Excel.  Switch to Microsoft Query and make sure that there are no dialog boxes open or that Microsoft Query is not busy retrieving data.
197174Microsoft Query is busy editing another query for Microsoft Excel. You can not edit more than one query at a time from within Microsoft Excel. Switch back to Microsoft Query to complete (or cancel) the editing operation currently in progress.
197175No data source specified.
197176Problems obtaining data.
197177The PivotTable report was saved without the underlying data. Use the Refresh Data command to update the report.
197178Data will be saved with other PivotTable reports using the same source data as this report.
197179Data will not be saved with other PivotTable reports using the same source data as this report.
197180Changes to the Background Query option also change the option for other PivotTable reports based on the same source data. From now on, when you refresh the other reports, the query for external data will also be run in the background.
197181Changes to the Background Query option also change the option for other PivotTable reports based on the same source data. From now on, when you refresh the other reports, the query for external data will also be run while you wait.
197182To save this web page to the current location, it needs to be saved using short file names, which requires organizing supporting files in a folder.  However, you don't have privileges to create a folder in the current location.
197183The folder that this Web page would use to organize supporting files is already reserved for use in the current location.  Please choose a different name or location for this Web page.
197184Changes to the Optimize Memory option also change the option for other PivotTable reports based on the same source data. From now on, memory will also be optimized for the other reports.
197185Changes to the Optimize Memory option also change the option for other PivotTable reports based on the same source data. From now on, memory optimization will also be turned off for the other reports.
197186Changes to the Refresh On Open option also change the option for other PivotTable reports based on the same source data. From now on, whenever you open this workbook, data will also be refreshed in the other reports.
197187Changes to the Refresh On Open option also change the option for other PivotTable reports based on the same source data. From now on, whenever you open this workbook, data also will not be refreshed in the other reports.
197188Changes to the Save Password option also change the option for other PivotTable reports based on the same source data. From now on, the database password will also be saved for the other reports.
197189Changes to the Save Password option also change the option for other PivotTable reports based on the same source data. From now on, the database password also will not be saved for the other reports.
197190References, names, and arrays are not supported in PivotTable formulas.

197191"That command cannot be performed while a protected sheet contains another PivotTable report based on the same source data.

To remove protection from the sheet that has the other report, click the sheet tab, point to Protection on the Tools menu, and then click Unprotect Sheet. Then try the command again."
197192Some calculated items were removed because new items of the same name appeared during refresh.
197193"Because a PivotTable report field is grouped, you cannot add a calculated item to this report.

To ungroup the field, make sure it is in the row or column area, select the field button for the grouped field, point to Group and Show Detail on the PivotTable menu, and then click Ungroup. Then insert the calculated item. Once inserted, you can group the items in the field again."
197194The field you are moving cannot be placed in that PivotTable area.
197195"An ending single quotation
mark ( ' ) is missing."
197196The formula is not complete. Make sure an ending square bracket  ]  is not missing.
197197The last item for the range is missing.
197198"An item name in the formula does not match any of the items in the field.

Check the field in the PivotTable report to make sure it has the item you typed. If the item name includes a space, put single quotation marks around the name, for example, 'Order Amount'."
197199"An item name is ambiguous. Another field in the PivotTable report may have an item with the same name.

Use the syntax field[item]. For example, if the item is Oranges and the field is Product, you would use Product[Oranges]."
197200An item name cannot be found. Check that you've typed the name correctly and the item is present in the PivotTable report.
197201"A field reference in your formula included more than one field name, such as 'Sales Revenue' when both Sales and Revenue are separate fields, or you tried to include a field name in a calculated item formula.

Calculated item formulas cannot include field names, and can include names of items only from the field in which you are inserting the calculated item."
197202Keywords must be entered alone.
197203References to subtotals and data items cannot be entered into PivotTable formulas.
197204References to multiple item names per field cannot be included in PivotTable formulas.
197205Refresh has been disabled by a Visual Basic macro.
197206Formatting cannot be applied to PivotTable reports in shared workbooks.
197207"This workbook contains a PivotTable report with a calculated field or calculated item. Calculated fields and items cannot be saved in this file format.

• The data displayed in calculated fields will be saved, but the next time you refresh the report, the calculated fields will be replaced with the first field in the data area.
• The data displayed in calculated items will be saved, but the formulas won't be. The next time you refresh the report, the calculated items won't appear."
197208Your formula needs an equal sign (=) at the beginning.
197209The format of a PivotTable formula is 'Item Name = Formula'.
197210"Some PivotTable cells contain circular references.

• Check your calculated field and item formulas to make sure that none of the formulas refer to their own cells.
• Or, change the order of calculation by using the Solve Order command (PivotTable menu, Formulas submenu)."
197211Group item names are not supported in calculated item formulas.
197212You've chosen to save this Web page using a short file name. The name must be eight characters or fewer in length.
197213Your formula cannot be entered because calculated fields cannot contain circular references. Change the formula to make sure that it doesn't refer to its own cells.
197214An insertion cannot be performed on that selection.
197215Microsoft Excel cannot make this change because there are too many row or column items.  Drag at least one row or column field off the PivotTable report, or to the page position. Alternatively, right-click a field, and then click Hide or Hide Levels on the shortcut menu.
197216You can't save files directly to this location.  Try saving the files to a different location, and then copying them to this location.
197217AutoSort must be turned off to move items in a field.
197218This document needs too many supporting files to use short file names.
197219Your formula includes a function that cannot be used in PivotTable formulas. You cannot use functions that return variable results, such as RAND and NOW, database functions, or the GETPIVOTDATA function in PivotTable formulas.
197220"This is an AutoSort field. Do you want to sort it manually?

• To sort manually now, and set the AutoSort options on the PivotTable Field Advanced Options dialog box to manual, click Yes. To display this dialog box for a field, double-click the field button, and then click Advanced.
• To cancel the sort, click No."
197221You cannot apply data validation to cells in a PivotTable report.
197222"You cannot edit the formulas in data cells for groups or for calculated fields.

To change the formula for a calculated field, click OK, and then point to Formulas on the PivotTable menu and click Calculated Field."
197223You cannot edit the formula for a calculated item while custom calculation is used.
197224You cannot edit data cells for fields in the row, column, or page area.
197225The path you've indicated for your Web page's supporting files is too long. Try saving the files with a shorter name, or in a higher directory.
197226Calculated items do not work with custom subtotals.
197227Multiple data fields of the same field are not supported when a PivotTable report has calculated items.
197228Averages, standard deviations, and variances are not supported when a PivotTable report has calculated items.
197229If you're trying to add a calculated item, you cannot do so because a field has been used more than once, either in the data area two or more times, or in the data area and another area at the same time.  Change the PivotTable report so that no field is used more than once, and then try the calculated item command again.
197230"Memory was used up attempting to convert and save PivotTable report data from a different version.
Data for the saved PivotTable report(s) will be refreshed upon the first update."
197231Groups cannot be placed in the data area when a PivotTable report has calculated items.
197232You have configured this Web page so that supporting files are in a folder, but you don't have privileges to create a folder in this location. Make sure you have the correct privileges, or choose another location.
197233PivotTable formulas can only refer to items in the same field as the calculated item.
197234"The item cannot be added or modified. There may not be enough memory, the maximum number of items allowed in a field may have been reached, or if a Visual Basic macro is performing the operation, the macro may be incorrect.

Simplify the PivotTable report or check the macro for errors, and then try the operation again."
197235AutoSort and AutoShow cannot be used with custom calculations that use positional references. Do you want to turn off AutoSort/Show?
197236"Positional references cannot be used in a calculated item formula while AutoSort by values or AutoShow is on.

To turn off AutoSort and AutoShow, double-click the field button for the field, click Advanced, and click the Manual options under AutoSort options and under AutoShow options."
197237The PivotTable report could not be sorted by values, because it contains a calculated item with a positional reference.
197238Text cannot be entered into a calculated item cell.
197239Calculated item or field could not be created because another item or field of the same name exists.
197240PivotTable report "|" contained incomplete information. To restore the missing information, click OK, and then click Refresh Data on the PivotTable toolbar.
197241"Excel cannot find OLAP cube |. Either the OLAP database has been changed or you don't have permissions to connect to the cube.

Consult your database administrator."
197242"Excel found more than one OLAP cube named |. Your data source might contain an error.

Check your data source or create a new one to connect to the OLAP cube you want."
197243You cannot show more detail for that selection. The data displayed is the lowest level of detail available in the source database.
197244"Excel cannot connect to your database with the driver you specified in your data source. The driver does not support OLAP-provider capabilities required by Excel.

Consult your system administrator or contact your OLAP database vendor."
197245The item could not be found in the OLAP Cube.
197246"The organization or content of the OLAP cube has been changed and, as a result, the field could not be found in the OLAP cube.

Click OK, and then click Refresh Data on the PivotTable toolbar to update the field list."
197247"This |0 was created in a later version of Excel and can't be updated in this version.

To update it, click OK, and then open the workbook in the version of Excel it was originally created in."
197248You can not use an OLAP cube for this query source.
197249Microsoft Query either is not installed properly or does not have enough memory to run.
197250Click OK, close one or more programs to free up resources, and then try the operation again. If you see this message again, run the installation program that you used to install Excel, and then repair or reinstall Query.
197251How to install MS Query
197252Microsoft Query is not able to run properly.
197253"Try the following:

• Switch to the Query window, make sure it isn't waiting to receive data, and then close any open dialog boxes.

• If this does not correct the problem, close one or more programs so that Query has enough memory to run."
197254More about MS Query
197255Microsoft Query is busy editing another query for Microsoft Excel.
197256You can not edit more than one query at a time from within Microsoft Excel.  Task switch back to Microsoft Query and complete (or cancel) the editing operation currently in progress, and try your command again.
197257About Microsoft Query
197258A problem occurred while returning your data from Microsoft Query.
197259" Your query might not have selected any data, your MS Query data sources may not be set up correctly, or there may be a problem with the connection to the external database.

Create the query again. Verify that you can connect to your external database and view the data. Make sure the Query Wizard or the MS Query window is displaying the correct data before you return the data to Microsoft Excel."
197260How to create a query

197261How to set up a data source
197262The PivotTable report named |0 on |1 could not be refreshed.
197263The external data range |0 on |1 could not be refreshed.
197264The original external data range is no longer valid.
197265This workbook contains a query that is currently being edited by Microsoft Query.  Changes made to this query will not be saved, and you will not be able to use Microsoft Query to create or edit additional queries in Microsoft Excel until you complete or cancel this editing operation in Microsoft  Query.
197266This sheet contains a query that is currently being edited by MS Query.  You will not be able to use MS Query to create or edit additional queries in Excel until you complete or cancel this editing operation in MS Query.
197267This action will cancel a pending Refresh Data command.  Continue?
197268This workbook contains external data.  Do you want Microsoft Excel to clear the data before saving the template, and then automatically refresh the data whenever the template is opened?
197269"The following data range failed to refresh:
|
Continue to refresh all?"
197270No columns that Microsoft Excel can use were returned from this query.
197271This refresh is already running in the background.
197272This operation cannot be done because the data is refreshing in the background.
197273Data Range properties cannot be modified while the data is being refreshed.
197274The query definition cannot be edited while the data is being refreshed.
197275Data Range properties cannot be modified while the query definition is being edited.
197276External Data cannot be refreshed while the query definition is being edited.
197277Copy '|0' to the Addins folder for |1?
197278Unable to copy add-in to library.
197279'|' is not a valid add-in.
197280Cannot find add-in '|'. Delete from list?
197281"The query returned more data than will fit on a worksheet.

• To continue and display as much of the data as will fit, click OK.
• To cancel the query, click Cancel. You can go back to Microsoft Query to create a query that returns less data (look up criteria in Microsoft Query Help)."
197282Microsoft Excel cannot insert columns because the last column (column IV) contains data. You will not get any data.
197283Bad Name for Query
197284A query with this name already exists on this sheet
197285This will permanently remove the query definition from the sheet. Continue?
197286Cannot return external data to a hidden sheet.
197287Cannot return external data to a macro sheet
197288The start of the destination range specified lies within an existing External Data Range.  Please choose another destination.
197289This external data range was created programmatically and can not be refreshed.
197290This external data range was created programmatically and can not be edited.
197291QueryTable is invalid.
197292The range you deleted is associated with a query that retrieves data from an external source. Do you want to delete the query in addition to the range? If you click No, the query will retrieve new data to the worksheet the next time the query is refreshed.
197293Column sorting, filtering, and layout changes are not being retained for this external data range. To begin retaining these changes, click OK, and then click Refresh Data on the External Data toolbar.
197294"This external data range uses features from a future version of Excel that are not supported in Excel 11 Beta. Changing the query or refreshing the data will cause information used by these features to be lost. Do you want to continue?

• To continue the operation and discard the data, click Yes.
• To cancel the operation and keep the data, click No."
197295"This workbook contains one or more external data ranges whose column sorting, filtering, and layout changes are no longer being retained.

To start retaining these changes, click OK, and then click Refresh Data on the External Data toolbar."
197296If you modify the query, columns that you deleted from the Excel external data range will reappear as new columns, unless you also eliminate those columns from the query.
197297"No data is currently displayed in this external data range. As a result, you can't hide the row numbers.

Either refresh the external data range or change the query so that it returns data, then try the operation again."
197298If you continue the refresh, hyperlinks in the external data range will no longer work. Do you want to continue?
197299"The external data range contains one or more columns that were added in Excel. When you publish this data to the Web with interactivity, these columns won't be included.

If you want to include these columns on the Web page, click Cancel, and then publish the range as noninteractive data."
197300Microsoft Excel could not open or read this query file.  Either the file has been damaged or the file format is not valid.
197301"Excel cannot open this query file because it includes features that are only available in a later version of the product.

To use this file, open the file in the program it was originally created in. If the program allows, save the file in an Excel 11 Beta format."
197302Authorization Failure
197303SQL Syntax Error
197304Insufficient Connection Information
197305General ODBC Error
197306Microsoft Excel cannot complete this operation because the ODBC Driver Manager is not installed.  To install the ODBC Driver Manager, run Setup and install the database driver for the type of database(s) you want to access.
197307"An operation that uses the database driver could not be completed.

If the driver is a Microsoft driver, make sure the driver file isn't damaged, and if it is, reinstall the driver by reinstalling Microsoft Query. For other drivers, contact your database administrator or driver vendor."
197308"The database driver does not support this type of query.

For information about the types of queries the driver supports, see Help for the driver, or contact your database administrator or driver vendor."
197309"Initialization of the data source failed.

Check the database server or contact your database administrator. Make sure the external database is available, and then try the operation again. If you see this message again, create a new data source to connect to the database."
197310"The query did not run, or the database table could not be opened.

Check the database server or contact your database administrator. Make sure the external database is available and hasn't been moved or reorganized, then try the operation again."
197311The database driver does not include necessary capabilities and cannot be used with Excel. Contact your database administrator or driver vendor.
197312"Excel was unable to get necessary information about this cube. The cube might have been reorganized or changed on the server.

Contact the OLAP cube administrator and, if necessary, set up a new data source to connect to the cube."
197313"Data could not be retrieved from the database.

Check the database server or contact your database administrator. Make sure the external database is available, and then try the operation again."
197314"Excel was unable to load a necessary component. This component might have been damaged or deleted.

Reinstall the client software or data source driver software for your database."
197315"Excel could not locate the client-server settings component for your OLAP provider.  The OLAP provider may not suport this feature, or the feature may have been damaged.

Click OK, and then verify that the OLAP provider supports the client-server settings feature.  If so, reinstall the OLAP provider software, and if the problem repeats, reinstall Excel."
197316Invalid data value for parameter.
197317Empty value for parameter.
197318Bad parameter type. Microsoft Excel is expecting a different kind of value than what was provided.
197319Could not obtain parameter from reference (Bad name or workbook not open).
197320| Proceed to prompt for value?
197321Microsoft Excel could not bind a parameter value to the parameter. The query execution will be aborted.
197322Selection can be a single cell only.
197323Selection can be a single row or single column only.
197324"To refresh an external data range automatically when the parameter value changes, you must select a single cell to supply the parameter.

Click OK, and then select a single cell in the Get The Value From The Following Cell box."
197325"To refresh an external data range automatically when the parameter value changes, you must select the parameter cell from the same workbook as the external data range.

Click OK, and then select a cell in the same workbook in the Get The Value From The Following Cell box."
197326Incomplete datasource.
197327Refresh disabled.
197328Not an ODBC datasource.
197329This option is unavailable for this type of external database.
197330Not currently refreshing.
197331Not a DAO Recordset datasource.
197332The destination range is not on the same worksheet that the Query table is being created on.
197333Your program tried to set the UseLocalConnection property to True before you set a LocalConnection.
197334Not an ODBC data source or Web query
197335Invalid Web Query
197336Not a Web Query
197337A Web query can use only the first 255 characters of the Web page address. This may cause your Web query to return different data from what you expect. Do you want to continue?
197338The file you selected is not recognized as a text file. Excel can open it as a text file, but the results might not contain any useful data. Do you want to continue?
197339"Excel cannot find the text file to refresh this external data range.

Check to make sure the text file has not been moved or renamed, then try the refresh again."
197340"The text file contains more data than will fit on a single worksheet.

To continue and import as much of the data as will fit, click OK. You can then import the rest of the data by repeating the import operation on another worksheet and using the Text Import Wizard to exclude data already imported."

197341"No more system timer resources are available.

Close one or more programs to free up resources, then try the operation again."
197342"This report is based on an OLAP data source. You can't modify the query because you don't use a query to connect to this database.

• To continue creating or changing the report using the OLAP data source, click OK, and then click Next in the PivotTable and PivotChart Wizard.
• To use a different data source, click OK, click Cancel in the wizard, and then run the wizard again to create a new report."
197343Microsoft Query cannot modify this query. The query was created using an OLE DB data source driver that Query cannot support. Modify the query in the program it was originally created in.
197344Value must be greater than zero.
197345Value must be greater than or equal to zero.
197346Value must be between zero and 0.5.
197347Polynomial order must be an integer from 2 through 6.
197348Moving Average must have a period that is less than the number of points in the source data series.
197349Some trendlines cannot be calculated from data containing negative or zero values.
197350The name | is unknown.  Specify a valid name.
197351|
197352General mail failure.  Quit Microsoft Excel, restart the mail system, and try again.
197353Your mail system does not support certain services needed for document routing.
197354Too many mail sessions.  Quit other mail sessions and try again.
197355Too many recipients specified.  Route the document several times to smaller groups of recipients.
197356Message too long for your mail system.  Shorten the message and try again.
197357Cannot send status tracking message.
197358Too many recipients specified.  Send the document several times to smaller groups of recipients.
197359Unknown recipient name found in the recipient list.  Use a valid name and try again.
197360Ambiguous recipient name found in the recipient list.  Use a valid name and try again.
197361You must exit Windows and load SHARE.EXE in order to run Microsoft Excel.
197362"• The Precision As Displayed formatting
"
197363"• 1904 date system - Date values are converted to the 1900 date system
"
197364Excel cannot publish a range from a macro sheet.
197365Number is not valid.
197366Text is not valid.
197367Logical value is not valid.
197368"The reference you typed is not valid, or you did not provide a reference where one was required.

To enter a reference using the mouse, click in the edit box, and then click the cell in the sheet you want to refer to, or drag through the range you want to select. "
197369Error value is not valid.
197370Type is not valid.
197371Array value is not valid.
197372An error occurred initializing the VBA libraries (|)
197373One of your object libraries (|) is missing or damaged.  Please run Setup to install it.
197374"• Formulas that contain external references
"
197375"• Array formulas
"
197376"• Protection for hidden formulas - Formulas become visible
"
197377|1 method of |0 class failed
197378Unable to set the |1 property of the |0 class
197379Unable to get the |1 property of the |0 class
197380Cannot run Visual Basic macro because of a syntax error.
197381Invalid number of arguments.
197382A lexicon (|) is missing or damaged.
197383Could not register the Office object library.  Please run Setup.
197384The file '|' already exists.  Do you want to replace the file, or add data to the existing file?
197385"The following features do not work on interactive Web pages:

"
197386The Timer driver is not installed on this system.  Microsoft Excel cannot run without the Timer driver. 
197387Do you want to delete macro |?
197388This will close the workbook without saving. Some macro modules will be lost. Do you want to move the selected sheets anyway?
197389"You cannot save to this file format when the VBA project is protected.

You may unprotect the VBA project by choosing the Properties command on the Visual Basic Editor's Tools menu, and entering the password for the active project."
197390No data was selected to parse.
197391The Trace Precedents command requires that the active cell contain a formula which includes valid references.
197392The Trace Dependents command found no formulas that refer to the active cell.
197393The Trace Error command requires that the active cell contain an error value.
197394The Remove All Arrows command found no tracer arrows to remove.
197395The Error Tracer has encountered a branch point. Double-click the branch you want to follow and choose Trace Error again.
197396The Error Tracer encountered existing arrows or a circular reference. Delete all tracer arrows or resolve the circular reference, and then choose Trace Error again.
197397Your changes could not be saved to '|1', but were saved to a temporary document named '|0'. Close the existing document, then open the temporary document and save it under a new name.
197398This workbook has been password protected with an encryption scheme not available in this region. This workbook cannot be opened.
197399Since this workbook is protected for sharing, you cannot decrease the number of days to keep the change history. You can enter a larger number of days if you want to extend the period during which the change history is retained.
197400This command is not available in a shared workbook.
197401"This action will remove the workbook from shared use. The change history will be erased, and other users who are editing this workbook will not be able to save their changes, even if you share this workbook again.

Remove the workbook from shared use?

• To make the workbook exclusive, click Yes.
• To cancel and return to shared mode, click No."
197402Save not completed. File rename failed. Retry?
197403"If the user you selected is currently editing the workbook, this action will prevent the user from saving the workbook, and the user's unsaved work will be lost.

•To cancel the operation, click Cancel.
•To continue, click OK."
197404Changes made by another user cannot be merged. Use the File Save As command to save the workbook with a different name.
197405Unexpected file lock by |.  Please try again, and then if necessary, use the Share Workbook command (Tools menu) to turn off sharing.
197406The workbook has been updated with changes saved by other users.
197407History sheet cannot be renamed.
197408History is a reserved name.
197409This workbook contains macros recorded or written in Visual Basic. Macros cannot be viewed or edited in shared workbooks.
197410This book was made exclusive by |.
197411Outline symbols cannot be displayed because there is no outline on the active worksheet. Open the file in Exclusive mode to create an outline.
197412This action will now save the workbook. Do you want to continue?
197413To share this workbook, it must contain at least one visible worksheet.
197414This file is no longer shared.
197415This file has been locked by | for reading.  Try again later.
197416This file has been locked by | for saving.  Try again later.
197417This file is locked.  Try the command again later.
197418"You are no longer connected to this file.  Another user may have removed you from it, or saved over it.

To preserve your unsaved work, click OK, and save the shared workbook with a different name. You can then open the original shared workbook again, and merge in your changes from the copy of the workbook that you saved.

For information about merging workbooks, click Help."
197419The file | cannot be found.
197420The sharing attribute of embedded files cannot be changed.
197421A shared template cannot be inserted.
197422Passwords cannot be changed in shared books.
197423New or copied formulas cannot be saved while the file is being shared. Show this message in the future?
197424The change could not be undone. Please make the correction manually.
197425You cannot remove yourself from the list. Close the file instead.
197426Cannot copy or move array entered formulas or tables in a shared workbook.
197427File is locked. In order to save changes to the file, you can either close the file before making any changes and then re-open it, use Save As (File menu) to save the file using another filename, or turn off Shared Workbooks and then save the file.
197428"If you change this option, Microsoft Excel will erase the history of changes to this workbook. Users will no longer be able to view information about changes or merge copies of the workbook. Do you want to proceed?

• To change the option and erase the change history, click OK.
• To leave the option setting unchanged, click Cancel."
197429There are no more changes to accept or reject.
197430Changes have been erased
197431No new changes present to merge from |0.
197432"|0 cannot be merged into the current workbook. Workbooks to be merged must be copies made from the same shared workbook, and must all maintain the change history for a sufficient amount of time.

For more information about why the workbook couldn't be merged click Help."
197433That workbook cannot be merged because it contains changes that have not been merged followed by later changes that have already been merged into the current workbook.
197434Are you sure you want to reject the remaining | changes without reviewing them?
197435Unexpected file lock by |.  You can override this file lock, or continue without doing so.  If you continue without overriding this lock, you will not be able to save to this file, but you can use File Save As to save your work to a different file.  Do you want to override this lock?
197436The range | is not in the active workbook. Excel can publish ranges only from the active workbook.
197437This field has no items.
197438An AutoCorrect entry for '|' already exists.  Do you want to redefine it?
197439a Minimum
197440a Maximum
197441a Formula
197442a Source
197443a Start Date
197444an End Date
197445a Start Time
197446an End Time
197447a Value
197448a Date
197449a Time
197450a Length

197451the Minimum
197452the Maximum
197453the Formula
197454the Source
197455the Start Date
197456the End Date
197457the Start Time
197458the End Time
197459the Value
197460the Date
197461the Time
197462the Length
197463The Minimum
197464The Maximum
197465The Formula
197466The Source
197467The Start Date
197468The End Date
197469The Start Time
197470The End Time
197471The Value
197472The Date
197473The Time
197474The Length
197475You must enter either |0 or |1.
197476You must enter both |0 and |1.
197477|0 must be greater than or equal to |1.
197478"

Continue?"
197479"The value you entered is not valid.

A user has restricted values that can be entered into this cell."
197480Your worksheet contains more than 255 invalid cells. Only the first 255 cells will be marked.
197481You may not use unions, intersections, or array constants for | criteria.
197482A named range you specified cannot be found.
197483"You cannot use a direct reference to a worksheet range in a | formula.

Change the reference to a single cell, or use the reference with a worksheet function, such as =SUM(A1:E5)."
197484You may not use references to other worksheets or workbooks for | criteria.
197485The list source must be a delimited list, or a reference to single row or column.
197486Negative values cannot be used for | conditions.
197487Decimal values cannot be used for | conditions.
197488| must be a numeric value, numeric expression, or refer to a cell containing a numeric value.
197489| currently evaluates to an error. Do you wish to continue?
197490The date you entered for | is invalid.
197491The time you entered for | is invalid.
197492You must enter |.
197493You must enter |.
197494"The selection contains more than one type of validation.

Erase current settings and continue?"
197495The selection contains some cells without Data Validation settings. Do you want to extend Data Validation to these cells?
197496"For accurate data validation auditing, your worksheet needs to be recalculated.

Recalculate before auditing?"
197497Some view settings could not be applied.
197498View named '|' is not defined.
197499View '|' already exists. Do you wish to delete it and continue?
197500Do you wish to delete the view '|'?
197501You cannot use that name when you create a view in a shared workbook. Microsoft Excel reserves views named with your username followed by "- personal view".
197502A required minimum or maximum value is missing.
197503You must specify criteria for all conditional formats.
197504This chart is protected. You cannot change its formatting and text, move and size chart elements, or add new elements.
197505This chart is protected. You cannot add to or change the data in the chart.
197506This workbook contains a type of macro (Microsoft Excel version 4.0 macro) that cannot be disabled. There may be viruses in these macros. If you are sure this workbook is from a trusted source, click Yes. Open the workbook?
197507"This workbook contains Excel 4.0 macros. Workbooks containing these macros cannot be signed.

Remove the Excel 4.0 macro sheets, and then try the signing operation again."
197508Range in Scripts.Add cannot specify a sheet different from Scripts.Parent.
197509Excel can not sign VBA macros when saving to this file format.  Do you want to remove the digital signature and continue saving this workbook?
197510This workbook is currently referenced by another workbook and cannot be closed.
197511"Microsoft Excel requires file OLEAUT32.DLL to run. The version of OLEAUT32.DLL that is on your computer is older than the one required by this version of Microsoft Excel.

Please run Setup again, and select the Reinstall option to install the correct version of the file."
197512Shared Workbooks do not support the format of your data.  Remove any Hyperlinks or Merged Cells to complete the operation.
197513Excel has detected an inconsistent book structure. There is already a sheet named '|'.
197514Font size must be between 1 and 409 points.
197515Cannot open chart created in Microsoft Excel for the Macintosh version 1.X.
197516Cannot open normal document created in Microsoft Excel for the Macintosh version 1.X.
197517An error occurred while trying to go to this subscriber's publisher.
197518Remote data not accessible. Start application '|'?
197519Existing remote links will be terminated.
197520No printers are installed. To install a printer, point to Settings on the Windows Start menu, click Printers, and then double-click Add Printer. Follow the instructions in the wizard.
197521Excel can publish ranges only from the active workbook.
197522The header or footer cannot be longer than 255 characters. Delete some text, or make the formatting less complex.
197523Excel cannot access the source data for the chart. The source data may be missing or may not match the values used in the chart.
197524Excel cannot publish the chart because the source data is on multiple sheets.
197525The workbook containing the chart's source data is closed and therefore cannot be accessed for Web publishing.
197526Excel cannot publish the chart interactively because a range in the source data is not a single, contiguous (rectangular) range.
197527There is not enough memory available to publish |.
197528Excel cannot publish |0 because |1 is not a valid DivID.
197529Too many files to mail.
197530Cannot load the mail service.  Check your mail installation.
197531Mail system failure.  Check your mail installation.
197532The picture is too large and will be truncated.
197533Excel cannot publish to the specified file because it is not in the expected format (a Web Page that includes a <BODY> tag). Or, the file may be corrupted.
197534The extract range has a missing or illegal field name.
197535A grouped field contains more items (over 1000) than can be saved in Microsoft Excel version 5.0 worksheet format.
197536"At least one item must be selected for display in this field.

Click OK, then select the check boxes for one or more items in the list."
197537File is not a valid wave file.
197538Recording buffer is full.
197539Cannot load wave file.
197540Cannot open waveform output device.
197541Cannot open waveform input device.
197542No help available.
197543"The sheet you are copying has cells that contain more than 255 characters. When you copy the entire sheet, only the first 255 characters in each cell are copied.

To copy all of the characters, copy the cells to a new sheet instead of copying the entire sheet."
197544No more new fonts may be applied in this workbook.
197545No more new fonts may be applied.  Please close some other documents and try again.
197546Some text formatting may have changed in this file because the maximum number of fonts was exceeded.  It may help to close other documents and try again.
197547Specify the range of cells you want to publish by selecting the range of cells on the worksheet or by typing the cell reference (including the sheet name). Example: Sheet1!A1:G15
197548Excel cannot publish a range from sheet | because the range became invalid. Choose "Range of cells" and specify the cells you want to publish.
197549|0 is on the hidden sheet |1. Excel cannot publish items from hidden sheets.
197550The |0 |1 no longer exists in the workbook.
197551The |0 no longer exists on sheet |1.
197552The |0 |1 no longer exists on sheet |2.
197553| This item will be deleted from the list of previously published items in this workbook.
197554"This workbook contains both links and query parameter references to other data sources.

• If you update the links, Excel attempts to retrieve the latest data.
• If you don't update, Excel uses the previous information.

Note that the query will not refresh unless you first open the other workbook before refreshing the query."
197555"This Web query produces different results in this version of Excel and in Excel 97.  Because the data may have been moved to a different position on the worksheet, formulas that previously referred to the data may no longer be correct.

Check the cell references in your formulas."
197556%ApplicationName% can't load the required converter.
197557%ApplicationName% can't display Help.
197558%ApplicationName% can't run this add-in.
197559Please quit Excel before shutting down.  In Excel, click Exit on the File menu.
197560You are attempting to apply an unsupported chart type to a PivotChart report.  PivotChart reports cannot use an XY (Scatter), Bubble, or Stock chart types.
197561"Do you want to save the changes to '|'?

Microsoft Excel recalculates formulas when opening files last saved by an earlier version of Excel."
197562Excel cannot update one or more links in this workbook.  To update the links, open all the link source files (Edit menu, Links command).  To be sure all calculations are updated, press F9.
197563You cannot select an item in this field by typing the item name. To select an item for display, click OK, press ESC, and then click the dropdown arrow in the cell.
197564This Web query may not save correctly as a separate file because it contains Asian, accented, or right-to-left characters.  To save your work, save the workbook containing the Web query instead.
197565Current printer is unavailable. Select another printer.
197566"This file was created in an earlier version of Excel. It contains one or more PivotTable reports based on a database that has fixed-length character fields.  Refreshing such reports may cause the fixed-length fields to lose formatting, display hidden items, or display different items if the fields are page fields.

If settings are lost, you can restore them manually and save them in the current Excel format."
197567This workbook cannot be opened under High Security Level because it contains a type of macro (Microsoft Excel 4.0 macro) that cannot be disabled or signed. To open this workbook, click Macro on the Tools menu, then click Security. In the Security dialog box, click Medium.
197568This workbook contains one or more links that cannot be updated. This workbook was also last saved with multiple sheets selected, and links cannot be fixed in this state. To fix the links, select a single sheet and then click Links on the Edit menu.
197569This command is unavailable because the license to use this application has expired.

262144Moving Average must have a period that is greater than 1 and less than 256.
262145"Microsoft Excel found an error in the formula you entered. Do you want to accept the correction proposed below?

|

• To accept the correction, click Yes.
• To close this message and correct the formula yourself, click No."
262146The calculated field could not be deleted because insufficient memory is available. Simplify the PivotTable report, or close other programs to free up memory, and try the operation again.
262147"Only one picture can be inserted in each section of the |.

•To replace existing picture, press Replace.
•To keep existing picture, press Keep."
262148The text you entered is not a valid reference or defined name.  Or you do not have rights to access this reference.
262149Excel was previously unable to load your toolbar customizations.  Would you like to reset your toolbars to their default state?
262150The file you selected does not contain a new Automation Server, or you do not have sufficient privileges to register the Automation Server.
262151You must restart the spelling checker for the dictionary change to take effect.
262152An unexpected error has occurred.  AutoRecover has been disabled for this session of Excel.
262153Lost data in one or more cells.
262154Renamed invalid sheet name.
262155PivotTable report '|0' on '|1' was discarded due to integrity problems.
262156A PivotTable report on '|0' was discarded due to integrity problems.
262157Repairs were made to PivotTable report '|0' on '|1'.
262158Repairs were made to a PivotTable report on '|0'.
262159Global PivotTable report information was repaired due to integrity problems.
262160Query Table '|0' on '|1' was discarded due to integrity problems.
262161A Query Table on '|0' was discarded due to integrity problems.
262162Repairs were made to Query Table '|0' on '|1'.
262163Repairs were made to a Query Table on '|0'.
262164Global Query Table information was repaired due to integrity problems.
262165Excel is unable to load the cached records for one or more PivotTable reports.  You will need to refresh those reports before they can be used again.
262166Lost data link from one or more chart series.
262167Lost data from one or more charts.
262168Lost Data Validation information in one or more sheets.
262169This workbook contains hyperlinks from one sheet to a particular location on another sheet.  These kinds of hyperlinks may not work correctly in certain browsers.  Do you want to change the hyperlinks to just point to the sheet, and not to a particular location on the sheet?
262170Would you like to cancel opening all files from your Alternate Startup File Location? (|)
262171Would you like to cancel opening all files at your XLStart location? (|)
262172Lost document summary information.
262173Excel cannot group by numeric or date intervals in fields with blank or missing data. Grouping information for some fields may be lost.
262174"One or more PivotTable reports based on external sources have been marked for update on load.

External data sources are used to import into Excel, but harmful connections can be used to access confidential information or write information back to a database.

If you trust the source of this file, press OK."
262175"Your changes could not be saved to '|0' because of a sharing violation.
Excel has created a temporary file with your changes preserved, called '|1'.
You can save the temporary file as a new name or lose your changes and all future changes."
262176ERROR: Cannot access
262177ERROR: There is protected data in
262178ERROR: There is a hidden sheet in
262179ERROR: Previously published data has been deleted from
262180ERROR: There is not enough memory to publish
262181ERROR: The file is not in proper format
262182ERROR: Cause is unknown for
262183WARNING: External references converted to values in
262184WARNING: Array formulas converted to values in
262185WARNING: Hidden formulas no longer protected in
262186WARNING: Precision as displayed option not supported in
262187WARNING: 1904 date system converted to 1900 date system in
262188The document is corrupt and cannot be opened. To try and repair it, use the Open and Repair command in the Open dialog (File menu) and select Extract Data when prompted.
262189You have interrupted the Find All command. Do you want to continue searching?
262190Do you want to replace the contents of the destination cells in |?
262191This data provider does not support totals that exclude hidden items.
262192&Update
262193Do&n't Update
262194Breaking links permanently converts formulas and external references to their existing values. Because this cannot be undone, you may want to save a version of this file with a new name. Are you sure you want to break links?
262195"This workbook contains links to other data sources.

- To update all linked information, click Yes.
- To keep the existing information, click No."
262196"This workbook contains both links and query parameter references to other data sources.

- To update all linked information, click Yes.
- To keep the existing information, click No.

Note that the query will not refresh unless you first open the other workbook before refreshing the query."
262197If you want to track reviewers' changes in this workbook, you need to make this workbook shared.  Do you want to save a shared version of this workbook?
262198The 'Save as Type' you chose doesn't support reviewing. Please choose a different 'Save as Type'.
262199Do you want to clear the change history and remove this workbook from shared use?
262200This document is not currently in a review cycle.
262201The current document hasn't been sent for review.
262202Excel cannot access '|'.  The document may be read-only or encrypted.
262203Lost Visual Basic project.
262204Removed one or more invalid formulas.
262205Removed invalid formats.
262206&Save temporary file
262207&Lose all changes
262208The document was saved successfully, but Excel cannot re-open it because of a sharing violation.  Please close the document and try to open it again.
262209"This data provider does not support totals that exclude hidden items.
Totals will be reset to include hidden items when the PivotTable report is updated."
262210"This workbook must be saved as a Microsoft Excel Workbook before it can be digitally signed.
Do you want to save the workbook?"
262211"This workbook must be saved as a Microsoft Excel Workbook before it can be digitally signed.  Saving will remove all existing signatures.
Do you want to save the workbook?"
262212The error check is complete for the entire sheet.
262213Removed one or more invalid names.
262214Excel encountered an error and had to remove some formatting to avoid corrupting the workbook.  Please re-check your formatting carefully.
262215FTP locations cannot be default file locations. Please enter a path that points to another location.
262216Saving will remove all digital signatures in the workbook.  Do you want to continue?
262217The file '|0' may have been changed by another user since you last saved it. In that case, what do you want to do?
262218Microsoft Excel cannot save this workbook because the control named | does not support saving. To save the workbook, delete this control, and then try the save again.
262219Microsoft Excel cannot display the results because there is not enough memory.
262220"Excel can perform checks while opening the workbook and attempt to repair any corruption it detects, or extract just the data (formulas and values) from the workbook.

• Click Repair if you want to recover as much of your work as possible.
• Click Extract Data if Excel was previously unable to repair the workbook."

262221One or more invalid conditional formats were removed from the workbook
262222This OLAP data source has no property fields available for this dimension.
262223"Data file: '|0' not found.

Would you like to connect to |1 instead?"
262224Do you want to connect to '|0'?
262225Do you want to try to connect using new connection information from the following file: '|'?
262226"You have interrupted an AutoRecover save. AutoRecover periodically
saves a backup copy of your file. Do you want to disable AutoRecover?"
262227Renamed one or more invalid names.
262228Continue adding watches?
262229Excel found errors that may cause some recovered data to be put in the wrong cells.  Please check your recovered data carefully.
262230"• Chart sheet types - Sheets will not be saved
"
262231"• MS Excel 4.0 Macro sheet types - Sheets will not be saved
"
262232"• MS Excel 5.0 Dialog sheet types - Sheets will not be saved
"
262233WARNING: Chart, MS Excel 4.0 Macro or Excel 5.0 Dialog sheets in
262234"Programmatic access to Visual Basic Project is not trusted
"
262235Cannot save document while debugging
262236This XML file cannot be opened because the system file Msxml.dll cannot be found. Please click Detect and Repair on the Help menu or reinstall Microsoft Office, and then try opening the XML file again.
262237"File cannot be opened because:
"
262238A DDE error has occurred, and a description of the error cannot be displayed because it is too long. If the filename or path is long, try renaming the file or copying it to a different folder.
262239"This OLAP provider does not support custom grouping.  Custom groups were previously defined for this PivotTable report.
Do you wish to retain the custom group definitions for the future?
To retain the custom group definitions, press Yes, to discard the custom group definitions, press No.  If you retain the custom group definitions, they will not be available during this session."
262240The OLAP provider does not support custom grouping.
262241The XML file you opened contained more rows or columns of data than Microsoft Excel supports. Extra rows or columns of data were ignored.
262242The file '|' already exists.  Do you want to replace the existing file?
262243'|' is not a shared workbook.  Reviewers' changes can't be merged into it.  You'll need to manually incorporate reviewers' changes.
262244The field you are dropping into the column area exceeds 255 items.  Only the first 255 items will be displayed as columns.  To include all of the field's data in your PivotTable report, drop it into a different area, such as the data area.
262245No errors were detected in '|'.  No repairs were necessary.
262246Lost ActiveX controls.
262247A sheet in the workbook you are trying to save is password protected.  Password protected sheets cannot be saved in an XML Spreadsheet.  To save this file as an XML Spreadsheet, you must first remove the password.
262248Excel has detected that you have recovered files. These files will be opened the next time you start Excel in normal mode.
262249"The stylesheet that you tried to use contains the following error preventing Excel from loading this file:
Line |0: |1, |2"
262250"You are trying to delete | that contains a locked cell. Locked cells cannot be deleted while the worksheet is protected.

To delete a locked cell, first remove protection using the Unprotect Sheet command (Tools menu, Protection submenu). You may be prompted for a password."
262251Excel has detected that '|' is a SYLK file, but cannot load it. Either the file has errors or it is not a SYLK file format. Click OK to try to open the file in a different format.
262252"This workbook contains one or more links that cannot be updated.

• To change the source of links, or attempt to update values again, click Edit Links.
• To open the workbook as is, click Continue."
262253Edit &Links...
262254This action will add | cell watches.  Do you want to continue?
262255Cannot find the aclui.dll, which is an operating system file.
262256This action exceeds the number of page breaks you can manually add to a worksheet. A worksheet can contain up to 1026 horizontal page breaks.
262257This workbook contains hyperlinks on shapes that point inside of the workbook.  These kinds of hyperlinks may not work correctly in certain browsers.  Do you want to remove these hyperlinks?
262258Excel cannot display this PivotTable report. The row area has more than 65,536 items, or the column area has more than 16,384 items.
262259Excel has completed its search and has made | replacements.
262260This word contains invalid characters and cannot be added.
262261You must enter a title for the range.
262262a row
262263a column
262264FTP and ODMA locations cannot be default file locations. Please enter a path that points to another location..
262265This workbook may contain formulas with references that Excel cannot recover. Do you want Excel to convert these formulas to values, or recover as much of the formulas as possible?
262266Cannot share '|' because it contains array formulas that are linked to other workbooks.
262267This XML file cannot be opened because of an error. Check to make sure the file is a valid XML file, and that the XML syntax is correct. You can also try re-creating the file and closing other applications before you attempt to open it again.
262268The workbook you are trying to save is password protected.  Password protected workbooks cannot be saved in an XML Spreadsheet.  To save this file as an XML Spreadsheet, you must first remove the password.
262269The target for a Range.Value(xlRangeValueXMLSpreadsheet) property set cannot be a discontiguous range.
262270The OLAP provider returned an unexpected number of dimensions.
262271"You cannot place a field that has more than 8,000 items in the column area.

If you want to use this field in the report, click OK, and then move the field to the row or page area."
262272This workbook was opened read-only.  For this reason, digital signatures cannot be added or removed.
262273Lost supporting data on one or more objects.
262274A range with the title '|' already exists. Please enter a new title for the range.
262275"Excel found data next to your selection, but you do not have sufficient permissions to change those cells.

Do you wish to continue with the current selection?"
262276The password you entered does not allow access to all of the cells you have selected.  Click OK, and then try another password or edit one cell at a time.
262277The title '|' contains illegal characters. Range titles may only contain letters, numbers, and spaces, and must begin with a letter.
262278"That command cannot be performed on a protected sheet because the source data for this PivotTable report requires a data refresh.

To remove protection from the sheet, click the sheet tab, point to Protection on the Tools menu, and then click Unprotect Sheet. Then try the command again."
262279Proofing tools are not installed. Please re-run Office setup.
262280Separator or menu key must be one character.
262281"Embedding of smart tags is turned off for this workbook. Smart tags that have been recognized will not be saved.

Would you like to turn on embedding of smart tags for this workbook?"
262282This PivotTable list could not be imported correctly by Excel and data may have been lost. If you need to work with this data in Excel, contact the author of the Web page for information about connecting to the original data source.
262283Some of the cells you are trying to change are password protected, but no one password will allow access to all of the cells. Click OK, and then try editing one cell at a time.
262284To save as XML Spreadsheet, you must have at least one worksheet in this workbook. Chart sheets, MS Excel 4.0 Macro sheets, and MS Excel 5.0 Dialog sheets are not supported.
262285To publish the entire workbook as an interactive web page, you must have at least one worksheet in this workbook.  Chart sheets, MS Excel 4.0 Macro sheets, and MS Excel 5.0 sheets are not supported.
262286Are you sure you want to delete '|'?
262287The password is too long.  Please type a shorter one.
262288The command you selected is not available from this shortcut menu.
262289too few
262290too many
262291This workbook has lost its VBA project, ActiveX controls and any other programmability-related features.
262292"Unknown error.
"
262293"|0
"
262294"Line |0, Position |1.
"
262295"You are attempting to put both grouped items and property fields in the same dimension.  This action is not supported.  After clicking OK:

• If you want to display property fields, first ungroup any grouped items in the dimension.

• If you want to display grouped items, first hide any property fields in the dimension."
262296There was a problem with the structure of the OLAP cube.
262297Excel was unable to add named range '|' to your workbook.
262298Excel received data from the source database that could not all be displayed. You may be able to display the data by clicking the Refresh Data button on the PivotTable toolbar.
262299The real-time data server '|' is not responding. Would you like Microsoft Excel to attempt to restart the server?
262300"Excel cannot open this file. The encryption type used is not available, contact the author of the file.
More encryption types are available using the High Encryption Pack."

262301To get data from a Web Page into Microsoft Excel, you must open Excel as an independent application and then perform a Web Query.
262302Macros are disabled because the security level is set to High and a digitally signed Trusted Certificate is not attached to the macros. To run the macros, change the security level to a lower setting (not recommended), or request the macros be signed by the author using a certificate issued by a Certificate Authority.
262303The workbook you selected has no data available to import.  See the author of the workbook for more information or select a different workbook.
262304This document cannot be checked in.
262305This document cannot be checked out.
262306The check out cannot be undone..
262307Discarded range protection data.
262308Discarded sheet protection settings.
262309Repaired cell comments.
262310Repaired minor file corruption.
262311This workbook has been password protected with an XOR encryption scheme and cannot be shared in this region. To enable sharing, please change the encryption scheme.
262312Microsoft Excel may not be able to properly open the XML Spreadsheet file you have saved, because at least one sheet contains more than 65,550 formulas that refer to defined names or cells on other sheets.
262313Because this workbook was repaired, it cannot be shared until you save it. Please save the workbook, and then share it.
327680Discarded list data.
327681Discarded sheet list settings.
327682A list cannot overlap another list.
327683The worksheet range for the list data must be on the active worksheet.
327684A list cannot overlap a range that contains a PivotTable report, query results, protected cells or another list.
327685Data will be removed from a Query Table with uncommitted changes.  Uncommitted changes will be lost, do you want to continue save?
327686The Query Table or SharePoint list is too big to fit on the sheet – operation aborted.
327687A PivotTable report cannot overlap a list.
327688Do you want to convert the list to a normal range?
327689One or more columns in the data source have not been imported into Excel.
327690Cannot modify the contents of a list total row.
327691"XML Data Tables are locked for editing while in design mode.

Click on 'Finish' on the structured Document task pane, then you can edit data in an XML Data Table."
327692Cannot complete operation: You are attempting to change a portion of a list row or column in a way that is not allowed.  This may occur when attempting to re-arrange cells within a list that affect other list cells in an unexpected way.
327693Cannot map elements on top of each other
327694Cannot paste due to list cells included in the destination range.
327695Cannot allow operation:  This operation is attempting to shift cells in a list on your worksheet.  You may need to move one or more lists manually before this will succeed.
327696Cannot make changes to a list when multiple sheets are selected.
327697This workbook contains one or more lists.  All lists must be removed from the workbook before it can be shared.
327698Header, insert, and total rows cannot be deleted. You must convert the list to a range in order to delete the specified row.
327699Cannot insert rows below the Insert row of a list.
327700Cannot complete operation: A list cannot overlap with a PivotTable report, query results, list, or merged cells.
327701Cannot complete operation: Operations (such as resize, paste, fill and clear) which include cells both inside and outside of a list range, or overlap multiple lists are not allowed.
327702"Cannot complete the paste or fill operation. This has been caused by one of the following conditions:

• You have copied cells inside and below your list. When you do this, you cannot paste the cells within the same list. Select a cell outside of your list and retry the paste operation.
• You have attempted to fill data from the Total row into the Insert row."
327703The range you have specified is invalid. The headers must remain in the same row and the resulting list must overlap the original list. The list must contain a header row, and at least one row of data. Please specify a valid list.
327704Cannot resize a list down when insert or total rows are showing, and a feature such as a PivotTable report, array formula, or merged cell below the list overlaps the list column boundaries.
327705Cannot resize a list with a boundary adjacent to a hidden row or column.
327706Cannot resize a single-cell XML list.
327707Because the total row is turned on, resizing this list will overwrite the data in |.  Do you want to proceed?
327708When an entire list is selected, autofill operations are only allowed within and to the right of the list.
327709When an entire list is selected, autofill operations are only allowed within and to the left of the list.
327710Field names for lists linked to Windows SharePoint Services cannot be changed in Excel.
327711Cannot complete operation: Select the entire list, including the insert and total row if present, and retry the operation.
327712Can not find an XML list mapped to this schema
327713You cannot map both single elements and repeating collections to the same cell range.
327714The operation cannot be completed because the cell or list column is already mapped.
327715An element is already mapped at this location.  Elements cannot overlap.
327716Cannot shift cells in a filtered range or list
327717This operation is only allowed on worksheets.
327718This operation will discard any pending changes. Changes will not be updated on the SharePoint site. This operation cannot be undone. Do you want to continue?
327719The list name may not contain '[', ']', or ';#'.  These characters will be removed from the name.
327720You cannot make changes to this list until you refresh it with Windows SharePoint Services. Alternatively, you can unlink the list to make your changes.
327721SharePoint lists can only be resized to include or exclude rows of data.  You cannot change the header row or the range of columns when resizing this list.
327722Operation is invalid when the total row is visible.
327723Cannot make changes to the SharePoint list. Discard changes and refresh the page before making further changes to the list. Alternatively, you can unlink the list from Windows SharePoint Services.
327724Cannot connect to Windows SharePoint Services. Before making changes to the list, you must either connect to the SharePoint site or unlink the list.
327725Cannot create this list while the AutoFilter command is turned on.  Creating a list from a range without headers may cause cells to be inserted, which is not allowed above an AutoFiltered range.  Turn the AutoFilter off, or create the list using the 'My list has headers' option.
327726This operation is attempting to change a filtered range on your worksheet and cannot be completed.  To complete this operation, AutoFilters in the sheet need to be removed.
327727One or more formulas are referencing the total row. Turning off the total row may cause these formulas to return unexpected results. Do you wish to continue?
327728This method or property cannot be used because some part of this range includes a list, or there are multiple selected sheets.
327729This list has hidden columns or read-only columns that require data but for which no default value has been specified. Existing rows in this list may therefore be edited, but new rows cannot be inserted.
327730This list is linked to a SharePoint document library.  You may edit existing document rows, but you may not add or insert additional records, or commit changes to folder information.
327731Editing cells in this rich text column may cause the loss of some formatting. Do you want to edit the cells anyway?
327732"The following features from your workbook will not be saved in the Web page.
Do you want to continue saving as a Web Page?"
327733"This workbook contains one or more lists with pending changes to Windows SharePoint Services; this normally happens when you have been editing a list and then save before you synchronize that list with the SharePoint site.
Click Yes if you made these changes or want to load the workbook with the connection to the SharePoint site.
Click No if you did not make these changes or do not want to load the workbook with the connection to the SharePoint site.
Click Cancel if you do not wish to load this workbook."
327734The | column is a read-only column that cannot be modified.
327735Cannot create a list in the last row of the workbook.  Lists need at least two rows, one for the list header, and one for the insert row.
327736Cannot resize lists on a protected worksheet.
327737Query results cannot overlap a list.  Please select another destination.
327738You cannot delete or move a column outside of the list for lists that are linked to Windows SharePoint Services.
327739You cannot copy or move a group of sheets that contain a list.
327740The list contains a string that is too long for Excel to publish. You must shorten strings that contain a large amount of text and formatting before publishing the list.
327741The list contains a string that is too long for Excel to display. If you edit the long value some data may be lost.
327742Cannot map the selected elements to |0, because the XML map is not attached to |1.
327743This element has already been mapped. An element cannot be mapped more than once.
327744Cannot export XML data. The XML maps in this workbook are not exportable.
327745This element has not been mapped. Continue?
327746Data will be lost due to this action. Continue?
327747Permission to the workbook you are referencing is currently restricted.
327748Permission to this workbook is currently restricted.
327749Cannot insert Excel 4.0 macros in a restricted workbook.
327750This workbook contains Excel 4.0 macros. If you would like to restrict permission to this document, you need to remove these macros.

327751Permission to this workbook is currently restricted. If you save in this format, any restrictions to this workbook will be removed. Are you sure you want to continue?
327752Permission to save in this format is currently restricted.
327753Permission to link to a picture of a workbook with restricted permission is currently restricted.
327754Cannot print this file. Permission to the file is currently restricted.
327755This cannot be used or changed while a list is using this QueryTable.
327756"XML Import Error:

Some data failed to import."
327757"XML Import Error:

Import failed."
327758"XML Import Error:

The data extends beyond the worksheet's valid range"
327759The range specified is invalid.
327760The operation cannot be completed because the result would overlap an existing XML mapping.
327761The operation cannot be completed because the result would overlap an existing list.
327762Cannot map XML elements in a shared workbook.
327763The operation cannot be completed because the result would overlap an external data range or PivotTable.
327764The selected range contains an XML mapping that will be lost if the range is merged. Continue?
327765XML elements cannot be mapped when multiple sheets are selected.
327766The number of elements exceeds the number of columns available in the worksheet. Some data will be truncated.
327767"The XML data was successfully exported. The data is not valid according to its schema.

Click Details for more information."
327768"The operation cannot be completed because the XML map is corrupt.

To fix this problem, remove the associated XML map from the workbook and then add the XML map back to the workbook."
327769"The following XML schema elements and structures will not be added to your workbook:

|

Do you want to continue adding this schema to your workbook?"
327770"The XML schema could not be added to your workbook because it contains the following elements and structures:

|"
327771" - any
- anyAttribute
- Substitution groups
- Abstract elements
- Recursive structures"
327772Multi-cell array formulas are not allowed in XML mappings.
327773(TBD) XL XML Pro SKU only!
327774Multi-cell array formulas are not allowed in lists.
327775Cannot connect to the server at this time. Your list cannot be published.
327776This feature cannot modify cells within the header, insert row, total row, read-only columns, or calculated columns in a list.
327777You cannot shift all the rows out of a list.
327778The range that you are attempting to move is referenced in a calculated column.  The data will be moved, but the formula that references the data will not be updated to the new location.
327779If you delete this XML map, you will no longer be able to import or export XML data using this XML map.
327780Cannot share '|' because privacy has been enabled on this workbook. To share this workbook, disable the privacy option on the Security tab of the Options dialog box, which is found on the Tools menu.
327781The privacy options cannot be enabled because this is a shared workbook. To enable privacy, you must first disable workbook sharing in the Share Workbook dialog box, which is found on the Tools menu.
327782There is already a map with that name in the workbook. Please type another name and try again.
327783"The specified name is invalid. Possible reasons are:

• The name exceeds 255 characters
• The name contains one or more of the following characters: \ / : * ? "" < > |
• The name contains one or more trailing spaces
• The name is blank"
327784An unexpected error has occurred. Your list cannot be published.
327785Cannot get the list schema column collection from the SharePoint list.
327786Cannot get the list schema column from the SharePoint list.
327787Cannot get the list schema column property from the SharePoint list.
327788Cannot get the interface to ListSessionExtension.
327789Cannot create SharePoint list.
327790Cannot get the list schema property from the SharePoint list.
327791Cannot save the list schema change to the SharePoint list.
327792Cannot create a new column on the SharePoint list schema.
327793Cannot set this column property to the SharePoint list schema.
327794Cannot add a column to the SharePoint list schema column collection.
327795Cannot get the interface to ListDSOExtension.
327796Cannot get the interface to RowsetChange.
327797Cannot get the interface to RowsetUpdate.
327798Cannot find the next row in the SharePoint list.
327799Cannot set data to SharePoint list.
327800Cannot insert rows in SharePoint list.
327801Cannot update the list to Windows SharePoint Services.
327802Cannot delete rows from the SharePoint list.
327803Cannot get the interface to RowSetConflict.
327804Cannot get original data from the SharePoint site.
327805Cannot get the interface to Server Error.
327806Cannot get pending rows status from list provider.
327807Cannot apply conflict data to the SharePoint list.
327808Cannot resynchronize the hidden version of a pending row to the SharePoint list by the list provider.
327809The specified list name is already in use on this server. You must rename the list before publishing it to the server.
327810The list does not exist. It may have been deleted by another user.
327811Cannot use this list functionality on a protected worksheet.
327812The PivotTable cannot connect to the SharePoint list.
327813"Shared workbooks cannot contain lists. You must either turn off sharing or disable the list functionality for this workbook.
In either case, data entered into workbook will be preserved.

To turn off sharing and open the workbook with the list intact, click OK.
To remove the list functionality and open the shared workbook, click Cancel."
327814If you save this file in Excel 2002 or earlier you will be forced to discard changes and refresh the list when you reload.
327815The workbook has been changed in a previous version of Microsoft Excel.  You will need to Discard Changes and Refresh, in order to continue using any lists connected to Windows SharePoint Services.
327816You cannot change or delete the name that was created to bind this list to the SharePoint site.
327817Cannot update changes while there are data validation errors in this list.
327818You do not have permissions to create the list on this server.
327819Another user has changed the structure of the list.  Your changes can no longer be published to the SharePoint list.
327820Your list contains a lookup column that exceeds 65,534 items, that column will be read only when editing in Excel.
327821Cannot connect to the server at this time. Your list cannot be published.
327822A timeout occurred while communicating with the server. Your list cannot be published.
327823The Server is busy at this time.  Your list cannot be published.
327824A timeout occurred while communicating with the server. Changes to your data cannot be saved.
327825Cannot connect to the server at this time. Changes to your data cannot be saved.
327826Your selection contains one or more query tables.  Do you want to convert the selection to a list and remove all query table connections?
327827A list cannot be created because a query table included in your selection is refreshing its data.  Either cancel the refresh or wait for it to complete, and then try again.
327828The server is busy at this time. Changes to your data cannot be saved.
327829An unexpected error has occurred. Changes to your data cannot be saved.
327830Client components for Windows SharePoint Services are not available.  You will not be able to edit lists connected to a SharePoint site.
327831You do not have adequate permissions to modify this list. Changes to your data cannot be saved.
327832Microsoft Excel did not find anything to fax.
327833The XML data source you chose is not valid.
327834Caution: You are attempting to save a shared workbook that is also protected with a password. Portions of the file, including the change history, will not be encrypted. To help ensure the security of your file, unshare the workbook or delete the change history from the document. Do you want to save the file?
327835The file is corrupt and cannot be opened.
327836'|' is a protected workbook. Protected workbooks cannot be compared side by side.
327837'|' needs to be a worksheet, a dialog sheet, or a macro sheet to compare side by side.
327838Delete all ink annotations in this workbook?
327839This will permanently remove the data source definition from the XML map. Continue?
327840The data that you are attempting to map contains formatting that is incompatible with the format specified in the worksheet.
327841Error checking is complete.  No more validation errors have been found.  To submit your changes to Windows SharePoint Services, use the Synchronize List command.
327842This list contains one or more cells with invalid data for the column it is contained in.  Use Error Checking to find and correct the invalid entries before attempting to commit changes again.
327843"The specified range is invalid due to one or more of the following reasons:

•The range refers to cells in more than one column.
•The range contains mapped cells from more than one XML map.
•The range contains both mapped and unmapped cells.
•The range contains both list and non-list cells.
•The range is not contiguous."
327844The SelectionNamespace is invalid. SelectionNamespace must be a space-delimited string of namespaces having the following form: xmlns:<prefix>='<URI>' (for example, xmlns:x='urn:schemas-microsoft-com:office:excel')
327845Data could not be imported. The structure of the data does not match the structure of the XML map.
327846The map could not be exported, so the data was not exported. Use XmlMap.IsExportable to determine whether the map can be exported.
327847Data cannot be imported because no existing XML maps have the same structure, and no destination was specified for creating a new XML map.
327848The specified root-element name does not exist in the provided schema.
327849Invalid file reference. The path to the file is invalid, or one or more of the referenced schemas could not be found.
327850This XPath has already been mapped.  The same XPath cannot be mapped more than once for the same XML map.